Preparing porous calcium hexaluminate (CA6) ceramics with calcium aluminate cement (CAC) as the gelling agent and sole calcia source
Source abstract
Abstract
Porous calcium hexaluminate (CA 6) is attractive for thermal insulation due to low conductivity and chemical stability at high temperatures. In this study, porous CA 6 ceramics were fabricated by a direct foaming method using calcium aluminate cement (CAC) as a gelling agent and sole calcia source. The results showed that the firing temperature is a significant factor in forming the CA 6. In the samples fired at 1550 and 1650 °C, the main phase was CA 6. Especially for samples fired at 1650 °C, the CA 6 content was as high as 90 %. With the firing temperature increased, the compressive strength of the sample using tabular alumina and high-pure ultra-fine alumina was increased significantly, while the size of foamed spherical pores was decreased. In addition to the firing temperature, the type of raw alumina plays a key role in forming the CA 6. The sample using high-pure ultra-fine alumina exhibited commendable comprehensive properties. The compressive strength is 5.12 MPa, and the thermal conductivity is 0.46 W·m −1·K −1. The work exhibited a simple process for producing porous CA 6 ceramic with high porosity and commendable properties, including thermal insulation and compressive strength, using CAC as a gelling agent and sole calcia source.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Assessment of the CaO-Al2O3 system10.1111/j.1151-2916.1990.tb05083.x ↗
2. Formation mechanism of calcium hexaluminate10.1007/s12613-016-1342-9 ↗
3. Optimization design of Ta2O5-doped calcium hexaaluminate with improved sintering densification and properties for metallurgical application10.1016/j.jallcom.2023.169297 ↗
4. Control of calcium hexaluminate grain morphology in in-situ toughened ceramic composites10.1007/BF00354672 ↗
5. Calcium hexaaluminate synthesis and its influence on the properties of CA2-Al2O3-based refractories10.1016/j.jeurceramsoc.2015.08.034 ↗
6. Exploring the limits of Fe3+ solid solution in calcium hexaluminate
7. Effect of incorporation of nitrogen on calcium hexaaluminate10.1016/j.jeurceramsoc.2020.06.057 ↗
8. Properties of novel ceramic materials in the BaO-Al2O3-AlN-MgO system with a β-alumina type structure10.4028/www.scientific.net/KEM.132-136.783 ↗
9. Substitution of Ba2+ for Ca2+ in the Structure of CaAl12O1910.1111/jace.14482 ↗
10. Effect of nickel oxide and titanium oxide on the microstructural, optical, and mechanical properties of calcium hexaaluminate ceramics10.1016/j.ceramint.2021.09.073 ↗
11. Effect of Nb2O5 additive on the sintering behavior and properties of calcium hexaluminate10.1016/j.conbuildmat.2023.131534 ↗
12. Control of hexagonal plate-like microstructure of in-situ calcium hexaluminate in monolithic refractories10.1080/21870764.2018.1484621 ↗
13. Microstructural evolution of Ti4+-doped calcium hexaaluminate ceramics10.1016/j.ceramint.2020.01.266 ↗
14. Preparation of Zr4+ doped calcium hexaaluminate with improved slag penetration resistance10.1111/jace.17859 ↗
15. Microstructure development in calcium hexaluminate10.1016/S0955-2219(00)00143-6 ↗
16. Sintering effect of calcium carbonate in high-alumina refractory castables10.1016/j.ceramint.2018.03.066 ↗
17. The adjustment of CA6 morphology and its effect on the thermo-mechanical properties of high temperature composites10.2109/jcersj2.18143 ↗
18. Effects of cement content on the microstructural evolution and mechanical properties of cement-bonded corundum castables10.1016/j.ceramint.2019.10.193 ↗
19. Homogeneously bulk porous calcium hexaaluminate (CaAl12O19): reactive sintering and microstructure development10.1016/j.ceramint.2017.11.138 ↗
20. Production of porous ceramic materialusing different sources of alumina and calcia
21. Low-temperature fabrication and properties of porous calcium hexaluminate (CA6) ceramics with low thermal conductivity by one-step method10.1016/j.ceramint.2022.11.159 ↗
22. A novel method for the fabrication of porous calcium hexaluminate (CA6) ceramics using pre-fired CaO/Al2O3 pellets as calcia source10.1016/j.ceramint.2019.10.208 ↗
23. Mechanism of pore generation in calcium hexaluminate (CA6) ceramics formed in situ from calcined alumina and calcium carbonate aggregates10.1016/j.jeurceramsoc.2016.05.026 ↗
24. Novel synthesis method and characterization of porous calcium hexaaluminate ceramics10.1111/jace.13141 ↗
25. Preparation of high-quality porous calcium hexa-aluminate ceramics using salt as both reaction medium and pore-former
26. Preparation of calcium hexaluminate porous ceramics by novel pectin based gelcasting freeze-drying method10.1016/j.ceramint.2020.12.024 ↗
27. Anisotropic porous ceramic material with hierarchical architecture for thermal insulation10.1088/1748-3190/ac3216 ↗
28. CA6-based macroporous refractory thermal insulators containing mineralizing agents10.1016/j.jeurceramsoc.2020.07.011 ↗
29. Macroporous high-temperature insulators physical properties by in situ CA6 formation: Does the calcium source matter?10.1016/j.jeurceramsoc.2020.04.001 ↗
30. Wet-ground calcium aluminate cement as a binder for directly foamed high-temperature macroporous ceramics10.1016/j.ceramint.2023.05.157 ↗
31. Preparation of calcium hexaluminate porous ceramics by gel-casting method with polymethyl methacrylate as pore-forming agent10.1016/j.ceramint.2022.06.309 ↗
32. Direct foaming of Al2O3-based macroporous ceramics containing pre-foamed colloidal alumina, calcite and CAC suspension10.1016/j.ceramint.2021.04.287 ↗
33. Synthesis of CaO·2MgO·8Al2O3 (CM2A8) and its slag resistance mechanism10.1016/j.jeurceramsoc.2016.11.018 ↗
34. Highly porous zirconia ceramic foams with low thermal conductivity from particle-stabilized foams10.1111/jace.14555 ↗
35. Mechanical strength of highly porous ceramic foams with thin and lamellate cell wall from particle-stabilized foams10.1016/j.ceramint.2017.11.202 ↗
36. Microstructure evolution of porous calcium hexaluminate compacts during first heating10.1016/j.ceramint.2023.11.230 ↗
37. Porous mullite ceramics with low thermal conductivity prepared by foaming and starch consolidation10.1007/s10934-013-9741-z ↗
38. Solid and gas thermal conductivity models improvement and validation in various porous insulation materials10.1016/j.ijthermalsci.2023.108164 ↗
39. Mechanical and thermal behavior of cellular mullite materials10.1016/j.jeurceramsoc.2021.05.047 ↗