Effect of manufacturing route on microstructure and micromechanical properties of AlCoCrFeNi high entropy alloy
Source abstract
Abstract
The manufacturing route of a particular metallic alloy profoundly affects its microstructure, as well as mechanical properties. In that respect, the present research investigates the microstructure and microstructure-dependent mechanical properties of the AlCoCrFeNi high entropy alloy (HEA), that was manufactured via two different routes: (i) Atmospheric plasma spraying (APS) in the form of coating on a stainless steel subtract and (ii) vacuum arc melting (VAM) in the form of bulk material. AlCoCrFeNi HEA coating microstructure is composed of a solid solution (Ni) as a matrix, which contains different phases, as well as intermetallics and defects, such as splat boundaries. On the contrary, the microstructure of bulk AlCoCrFeNi HEA alloy is free from any secondary phases, and is homogeneous in nature, which consists of only the solid solution of Ni. The experimental results show that the strength of the bulk HEA (963.14 ± 28.58 MPa of yield strength and 1005.58 ± 22.08 MPa of compressive strength) is better than that of HEA coating (yield strength of 802.33 ± 43.76 MPa and compressive strength of 817.73 ± 43.84 MPa). The phase, as well as splat boundaries in the microstructure, are the ‘weakest link’ in the HEA coating, that serves as defect initiation site. As the bulk HEA alloy is free from these ‘weakest link’, thus, deformation of the material is guided through plastic flow of materials, in the terms of the barrelling effect.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. High-entropy alloys10.1038/s41578-019-0121-4 ↗
2. Advanced high-entropy alloys: a next generation materials10.1007/s41403-023-00435-6 ↗
3. Review of recent research on AlCoCrFeNi high-entropy alloy10.3390/met11081302 ↗
4. Pressure-induced phase transition in the AlCoCrFeNi high-entropy alloy10.1016/j.scriptamat.2018.10.020 ↗
5. Macrostructure, microstructure, and mechanical properties of Al0. 2CoCrFeNi high-entropy alloy produced by vacuum induction melting
6. The influence of Al elements on the structure and the creep behavior of AlxCoCrFeNi high entropy alloys10.1016/j.matlet.2015.11.016 ↗
7. Microstructural, Mechanical and Wear Properties of Atmospheric Plasma-Sprayed and High-Velocity Oxy-Fuel AlCoCrFeNi Equiatomic High-Entropy Alloys (HEAs) Coatings10.1007/s11666-022-01520-y ↗
8. Slurry erosion behaviour of AlCoCrFeNi high entropy alloy coating prepared by atmospheric plasma spraying
9. Corrosion–wear behaviour of thermal sprayed nanostructured FeCu/WC–Co coatings10.1016/j.wear.2006.03.026 ↗
10. Effect of nanostructuring and Al alloying on friction and wear behaviour of thermal sprayed WC–Co coatings10.1016/j.surfcoat.2012.02.030 ↗
11. Characterisation and property evaluation of High Entropy Alloy coating on 316L steel via thermal spray synthesis10.1016/j.triboint.2023.108525 ↗
12. AlxCoCrFeNiSi high entropy alloy coatings with high microhardness and improved wear resistance10.1016/j.surfcoat.2020.126328 ↗
13. On the superior hot hardness and softening resistance of AlCoCrxFeMo0. 5Ni high-entropy alloys10.1016/j.msea.2011.01.072 ↗
14. and J. Pi, Microstructure and wear behavior of the AlCrFeCoNi high-entropy alloy fabricated by additive manufacturing10.1016/j.matlet.2019.127004 ↗
15. High temperature electrical properties and oxidation resistance of V-Nb-Mo-Ta-W high entropy alloy thin films10.1016/j.surfcoat.2019.07.080 ↗
16. High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process10.1016/j.surfcoat.2020.126093 ↗
17. Microstructure and oxidation behavior of new refractory high entropy alloys10.1016/j.jallcom.2013.08.102 ↗
18. Functional properties and promising applications of high entropy alloys10.1016/j.scriptamat.2020.06.017 ↗
19. Comparative eis study of alxcocrfeni alloys in ringer’s solution for medical instruments10.3390/met11060928 ↗
20. Progress and challenges on extrusion based three dimensional (3D) printing of biomaterials10.1016/j.bprint.2022.e00223 ↗
21. Role of surface quality on biocompatibility of implants-a review
22. Effect of critical plasma spray parameters on microstructure and mechanical properties of plasma-sprayed YSZ-20 wt% LSM composite coating
23. Structure and mechanical properties of plasma sprayed nanostructured alumina and FeCuAl–alumina cermet coatings10.1016/j.surfcoat.2007.08.053 ↗
24. Influence of atmospheric plasma spray parameters (APS) on the mechanical properties of Ni-Al coatings on aluminum alloy substrate10.3390/met11040612 ↗
25. Effects of critical plasma spraying parameters on microstructure and mechanical properties of LaPO4-8YSZ thick composite coatings10.1016/j.jallcom.2022.168688 ↗
26. Vacuum arc melted and heat treated AlCoCrFeNiTiX based high-entropy alloys: thermodynamic and microstructural investigations10.1016/j.jallcom.2022.163901 ↗
27. Effects of nickel content on the microstructure, microhardness and corrosion behavior of high-entropy AlCoCrFeNix alloys10.1038/s41598-020-78108-5 ↗
28. Effect of Zr content on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2016.01.033 ↗
29. Effect of Fe on microstructure, phase evolution and mechanical properties of (AlCoCrFeNi) 100-xFex high entropy alloys processed by spark plasma sintering10.1016/j.intermet.2018.09.011 ↗
30. An overview of microstructure, mechanical properties and processing of high entropy alloys and its future perspectives in aeroengine applications
31. High-entropy alloys: potential candidates for high-temperature applications–an overview10.1002/adem.201700645 ↗
32. Microstructure and mechanical property of as-cast,-homogenized, and-deformed AlxCoCrFeNi (0≤ x≤ 2) high-entropy alloys10.1016/j.jallcom.2009.08.090 ↗
33. Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys10.1016/j.intermet.2012.03.005 ↗
34. Atomic packing efficiency and phase transition in a high entropy alloy10.1016/j.jallcom.2008.11.059 ↗
35. Alloying behaviour, thermal stability and phase evolution in quinary AlCoCrFeNi high entropy alloy10.1016/j.apt.2018.06.006 ↗
36. Atomic-scale analysis of mechanical and wear characteristics of AlCoCrFeNi high entropy alloy coating on Ni substrate10.1016/j.jmapro.2022.12.009 ↗
37. Comprehensive study of phase transitions in equiatomic AlCoCrFeNi high-entropy alloy10.1016/j.jallcom.2020.158220 ↗
38. Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression10.1016/j.msea.2019.138141 ↗
39. Strength of a 3D printed Al 7068 alloy under micro-pillar compression10.1007/s12540-022-01171-2 ↗
40. Micro-compression testing: a critical discussion of experimental constraints10.1016/j.msea.2009.01.005 ↗
41. Deformation behavior of the hybrid S-phase layer formed on a stainless-steel substrate by thermochemical heat treatment under mechanical loading10.1016/j.msea.2024.146462 ↗
42. Deformation of electrodeposited gradient Co/Sn multilayered coatings under micro-pillar compression10.1016/j.engfracmech.2018.08.022 ↗
43. Understanding the micro-mechanical behaviour of recast layer formed during WEDM of titanium alloy10.3390/met12020188 ↗
44. Investigation on the microstructure and micro-mechanical properties of thermal-sprayed NiCoCrAlY high entropy alloy coating10.3390/designs8020037 ↗
45. Microstructure and micro-mechanical properties of friction stir processed Al 5086-based surface composite
46. Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites10.1016/j.actamat.2005.06.025 ↗
47. Strength effects in micropillars of a dispersion strengthened superalloy10.1002/adem.201000089 ↗
48. Microstructure and corrosion behavior of (CoCrFeNi) 95Nb5 high-entropy alloy coating fabricated by plasma spraying10.3390/ma12050694 ↗
49. Recent advancements in lightweight high entropy alloys–a comprehensive review
50. Arun, S., N. Radhika, and B. Saleh, Exploring the potential of high entropy alloys: a comprehensive review on microstructure, properties, and applications. Johnson Matthey Technology Review, 2027.
51. Dual-phase high-entropy alloys for high-temperature structural applications10.1016/j.jallcom.2017.09.089 ↗
52. The study of the content of oxygen and nitrogen in plasma coatings10.1134/S2075113324700138 ↗
53. Microstructural evolution, electrochemical and corrosion properties of AlxCoCrFeNiTiy high entropy alloys10.1016/j.matdes.2019.107698 ↗
54. Irradiation resistance in Al x CoCrFeNi high entropy alloys10.1007/s11837-015-1568-4 ↗
55. Microstructure and properties of FeCoNiCrX (XMn, Al) high-entropy alloy coatings10.1016/j.jallcom.2022.166061 ↗
56. Investigation of precipitate hardening of slip and twinning in Mg5% Zn by micropillar compression10.1016/j.actamat.2015.08.012 ↗
57. Transition from homogeneous-like to shear-band deformation in nanolayered crystalline Cu/amorphous Cu–Zr micropillars: intrinsic vs. extrinsic size effect10.1016/j.actamat.2012.09.027 ↗
58. Role of precipitation and solute segregation on micro-scale deformation of additively manufactured Inconel 71810.1016/j.msea.2023.145762 ↗
59. Formation and characterization of the recast layer formed on inconel 718 during wire electro discharge machining10.3390/ma16030930 ↗
60. Micro-scale deformation aspects of additively fabricated stainless steel 316L under compression10.3390/ma17020439 ↗
61. Microstructure and compressive properties of AlCrFeCoNi high entropy alloy10.1016/j.msea.2008.01.064 ↗
62. Microstructural characterization and mechanical properties of an Al0. 5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions10.1016/j.msea.2013.01.006 ↗
63. Microstructural characterization and wear analysis of AlTiVZrMoCr HEA coating on SS410 steel by atmospheric plasma spraying10.1016/j.jallcom.2024.176806 ↗
64. Higher-order gradient effects in micropillar compression10.1016/j.actamat.2012.12.038 ↗