Graphene composite coating for enhanced corrosion resistance of Ni foam flow field in PEMFC
Source abstract
Abstract
With the development of proton exchange membrane fuel cells (PEMFCs), metal foam with lightweight advantages and highly porous structures has become promising flow field material to replace traditional carbon plates. However, in the operating environment with high temperatures and acid situation, it suffers severe corrosion issues. To solve this problem, Sn and Sn/graphene composite coatings are prepared and the physical characteristics are analyzed by X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Tafel polarization test, potentiostat test, and electrochemical impedance spectroscopy are used to test the corrosion resistance of coated nickel foam in a PEMFC cathodic environment. Compared to Sn-coated foam, the corrosion resistance is further enhanced with the addition of graphene. The Sn/graphene coating obtained by electrodeposition at current density of 15 mA·cm –2 has the lowest corrosion current density, which accounts for only 41.20 % and 33.48 % of the uncoated foam value at 50°C and 80°C, respectively. It also exhibits the maximum coating resistance, the lowest potentiostatic current and interfacial contact resistance, which is 66.3 % lower than the US DOE 2025 goal. After an 8 h constant potential test, no noticeable pitting behavior is shown on the surface because of the compact Sn/graphene coating. The addition of graphene promotes the nucleation of Sn metal and results in lower Sn oxidation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Memory and Neural Computing · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. A Ti3C2Tx-carbon black-acrylic epoxy coating for 304SS bipolar plates with enhanced corrosion resistant and conductivity10.1016/j.ijhydene.2022.08.010 ↗
2. Three-dimensional performance simulation of PEMFC of metal foam flow plate reconstructed with improved full morphology10.1016/j.ijhydene.2023.03.334 ↗
3. Performance enhancement of air-cooled open cathode polymer electrolyte membrane fuel cell with inserting metal foam in the cathode side10.1016/j.ijhydene.2020.07.102 ↗
4. Fused multi-model predictive control with adaptive compensation for proton exchange membrane fuel cell air supply system10.1016/j.energy.2023.128459 ↗
5. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
6. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
7. Experimental Investigation of Proton Exchange Membrane Fuel Cell with Commercial Stainless Steel Fiber Felt as Flow Field10.20964/2022.09.31 ↗
8. Impact of pressure on carbon films by PECVD toward high deposition rates and high stability as metallic bipolar plate for PEMFCs10.1016/j.ijhydene.2020.04.078 ↗
9. Impact of pressure on carbon films by PECVD toward high deposition rates and high stability as metallic bipolar plate for PEMFCs10.1016/j.ijhydene.2020.04.078 ↗
10. Standardized testing framework for quality control of fuel cell bipolar plates10.1016/j.jpowsour.2020.228972 ↗
11. Preparation and performance of nanometric Ti/TiN multi-layer physical vapor deposited coating on 316L stainless steel as bipolar plate for proton exchange membrane fuel cells10.1016/j.jpowsour.2019.226818 ↗
12. Application of porous materials for the flow field in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2021.229664 ↗
13. Modeling two-phase flow in three-dimensional complex flow-fields of proton exchange membrane fuel cells10.1016/j.jpowsour.2017.09.003 ↗
14. Porous metal foam flow field and heat evaluation in PEMFC: A review10.1515/htmp-2022-0290 ↗
15. Manufacture, characterization and application of porous metal-fiber sintered felt used as mass-transfer controlling medium for direct methanol fuel cells10.1016/S1003-6326(13)62700-4 ↗
16. Analysis of single- and two-phase flow characteristics of 3-D fine mesh flow field of proton exchange membrane fuel cells10.1016/j.jpowsour.2019.226995 ↗
17. Application of Metal Foam as a Flow Field for PEM Fuel Cell Stack10.1002/fuce.201700180 ↗
18. Metal Foam Flow Field Effect on PEMFC Performance
19. Experimental performance investigation on the arrangement of metal foam as flow distributors in proton exchange membrane fuel cell10.1016/j.enconman.2021.113846 ↗
20. A nanocrystalline zirconium carbide coating as a functional corrosion-resistant barrier for polymer electrolyte membrane fuel cell application10.1016/j.jpowsour.2015.08.024 ↗
21. Corrosion-resistant nanostructured carbon-based coatings for applications in fuel cells based on bipolar plates10.1016/j.vacuum.2023.112643 ↗
22. Corrosion Behavior of Au Coating on 316L Bipolar Plate in Accelerated PEMFC Environment10.20964/2021.11.50 ↗
23. Properties of SS304 Modified by Nickel-Cobalt Alloy Coating with Cauliflower-Shaped Micro/Nano Structures in Simulated PEMFC Cathode Environment10.3390/nano12121976 ↗
24. Evaluation of Mg-Nd-Zn-Zr magnesium alloy as bipolar plate in simulated polymer electrolyte membrane fuel cell environments
25. Graphene and graphene oxide as new class of materials for corrosion control and protection: Present status and future scenario
26. Graphene: a multipurpose material for protective coatings10.1039/C5TA01010A ↗
27. Graphene as corrosion protection for metal foam flow distributor in proton exchange membrane fuel cells10.1016/j.ijhydene.2017.03.233 ↗
28. Remarkably Corrosion Resistant Graphene Coating on Steel Enabled Through Metallurgical Tailoring
29. Graphene-Coated Ni–Cu Alloys for Durable Degradation Resistance of Bi-Polar Plates for Proton Exchange Membrane Fuel Cells: Remarkable Role of Alloy Composition
30. Spectroscopic investigation of improved corrosion resistance of nickel due to multilayer graphene coating developed with suitably tilted substrate during CVD10.1016/j.carbon.2022.08.054 ↗
31. Durable degradation resistance of graphene coated nickel and Monel-400 as bi-polar plates for proton exchange membrane fuel cell
32. High corrosion resistance of reduced graphene oxide coated 316L stainless steel bipolar plate for proton exchange membrane fuel cell prepared by a facile method10.1016/j.matchemphys.2022.126663 ↗
33. Development of anti-corrosive novel nickel-graphene oxide-polypyrrole composite coatings on mild steel employing electrodeposition technique10.1016/j.synthmet.2022.117135 ↗
34. A novel functionally graded Ni-graphene coating and its corrosion resistance10.1016/j.jallcom.2020.154495 ↗
35. Electrochemical behaviour of chromium–graphene composite coating
36. Electrochemical Behavior of Sn-Graphene Composite Coating10.1039/C5RA11207A ↗
37. Improving corrosion resistance of Mg–Li alloys by Sn microalloying10.1016/j.jmrt.2023.07.205 ↗
38. The corrosion of Solid Solution Mg-Sn binary alloys in NaCl solutions10.1016/j.electacta.2018.11.118 ↗
39. Tribological Properties and Corrosion Resistance of Porous Structure Ni-Mo/ZrO2 Alloys10.3390/coatings10080767 ↗
40. Effects of fluoride ions on corrosion performance and surface properties of SS304 in simulated PEMFC cathodic environments10.1016/j.renene.2023.05.117 ↗
41. Enhanced corrosion resistance of Ni/Sn nano-electrodeposited metal foam for flow field application in simulated PEMFC cathode environment10.1016/j.ijhydene.2022.08.106 ↗
42. Fabrication and characterisation of electro-brush plated nickel-graphene oxide nano-composite coatings
43. The effect of current density on the grain size of electrodeposited nanocrystalline nickel coatings10.1016/j.surfcoat.2008.01.018 ↗
44. Self-assembled dendrites of graphene oxide quantum dots via bottom-up lyophilization synthesis10.1016/j.molstruc.2023.136818 ↗
45. Evolution of the chemical composition of Sn thin films heated during x-ray photoelectron spectroscopy
46. High Active PdSn Binary Alloyed Catalysts Supported on B and N Codoped Graphene for Formic Acid Electro-Oxidation10.3390/catal10070751 ↗
47. Lasia · 2014