An Investigation on unstable flow during hot deformation of Inconel X750 superalloy using 3D processing map and shear band formation criterion
Source abstract
Abstract
In this study, deformation efficiency and instability criteria were employed to delineate the unstable flow regions for Inconel X750 superalloy through high temperature deformation. High temperature stress–strain data attained from isothermal hot compression experiments in the temperature range of 950–1150 °C and strain rates between 0.0001 and 1 s⁻¹ to identify safe and un-safe deformation domains in terms of an integrated 3D processing maps. These domains were validated through detailed microstructure observation and material tendency to shear band formation in terms of the competition between work hardening and strain rate sensitivity i.e. flow localization parameter. The superimposed effect of microstructure features like dynamic precipitation, dynamic recovery (DRV), and dynamic recrystallization (DRX) with destructive shear banding were responsible for controlling the material behaviour. Based on the TEM images, it was observed that material revealed stable flow at lower strain rates while adiabatic shear band and flow localization occurred at higher strain rates due to activation of slip systems and cell formation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Effect of heat treatment on microstructure and mechanical properties of GH4099 superalloy fabricated by selective laser melting10.1016/j.jallcom.2022.167813 ↗
2. Enhancing tribological properties of Inconel X-750 superalloy through surface topography modification by shot blasting10.1520/MPC20200172 ↗
3. Microstructure evolution, hot deformation behaviour and processing map of Inconel X-750 superalloy in sub-solvus and super-solvus temperature ranges10.1016/j.jmrt.2023.08.269 ↗
4. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
5. Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps10.1007/s11665-013-0616-x ↗
6. Flow characterization of a duplex near α Ti6242 alloy through interrelation of microstructural evolution, 3d activation energy map, and processing map10.1002/adem.201500426 ↗
7. The Occurrence of Shear Bands in Metalworking
8. Dieter · 2003
9. An investigation of workability and flow instability of Sn-5Sb lead free solder alloy during hot deformation10.1016/j.msea.2018.01.097 ↗
10. Plastic instability and flow localization in shear at high rates of deformation10.1016/0001-6160(84)90080-4 ↗
11. Deformation and unstable flow in hot torsion of Ti-6Ai-2Sn-4Zr-2Mo-0.1Si10.1007/BF02643754 ↗
12. On the dynamic material model for the hot deformation of materials10.1023/A:1006623126416 ↗
13. Prasad · Hot Working Guide: A Compendium of Processing Maps · 2015
14. Instability criteria for hot deformation of materials10.1179/095066000771048782 ↗
15. Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map10.1016/j.jmapro.2020.05.008 ↗
16. Characterization of hot deformation behavior of extruded ZK60 magnesium alloy using 3D processing maps10.1016/j.matdes.2013.11.037 ↗
17. M. Chen, S. Cao, K. Dong, Study on the manufacturing process of large super alloy X-750 forgings for nuclear equipment, in: ICONE29, Advanced Methods of Manufacturing for Nuclear Reactors and Components, 10, 2022. https://doi.org/10.1115/ICONE29-91791.10.1115/ICONE29-91791 ↗
18. Bauschinger effect in age-hardened Inconel X-750 alloy10.1016/S0921-5093(01)00933-9 ↗
19. C. Marsh, The Mechanical Properties And Deformation Behavior Of Heat Treated Versus As-Received Inconel X-750, (n.d.) 97.
20. The deformation and fracture characteristics of Inconel X-750 at room temperature and elevated temperatures10.1007/BF02654718 ↗
21. Evolution of flow stress and microstructure during isothermal compression of Waspaloy10.1016/j.msea.2014.07.093 ↗
22. Study of precipitation and growth of γ′ and dislocation structure in Inconel X-75010.1016/0026-0800(86)90008-X ↗
23. Thermo-Calc and Dictra simulation of constitutional liquation of gamma prime (γ′) during welding of Ni base superalloys10.1016/j.commatsci.2007.02.008 ↗
24. Theory of workhardening 1934-198410.1007/BF02670414 ↗
25. Strain rate sensitivity and strain hardening exponent during the isothermal compression of Ti60 alloy10.1016/j.msea.2012.01.021 ↗
26. Deformation modes in the single-crystal nickel-based superalloy CMSX-4 during compressive deformation at 1000 °C10.1007/s11661-021-06572-3 ↗
27. Recovery of strain-hardening rate in Ni-Si alloys
28. Effect of the size distribution of nanoscale dispersed particles on the Zener drag pressure10.1007/s11661-010-0452-7 ↗
29. Microtwinning and other shearing mechanisms at intermediate temperatures in Ni-based superalloys10.1016/j.pmatsci.2009.03.010 ↗
30. The synchronous improvement of strength and plasticity (SISP) in new Ni-Co based disc superalloys by controling stacking fault energy10.1038/s41598-017-07884-4 ↗
31. Tensile mechanical properties of Ni-based superalloy of nanophases using molecular dynamics simulation10.1002/pssb.201552149 ↗
32. Formability and workability of metals: plastic instability and flow localization