journal article·2025-01

Microstructural evolution and increased high-temperature tensile strength of extruded and aged AlN/Al reinforced Mg-10Gd-3Y-1Zn composites

Wenlong Xie, Yuyang Gao, Hong Yang, Jianxin Zhou, Jiwei Zhao, Xin Guo, Jiangfeng Song, Guangsheng Huang, Bin Jiang, Fusheng Pan

Publisher page

Abstract

The AlN particles (0, 1, 2 and 3 wt%) combined with Al (0.8 wt%) particles were utilized to fabricate AlN/Al reinforced Mg-10Gd-3Y-1Zn (GWZ) composites using ball-milling and mechanical stirring. Hot extrusion and ageing treatment were applied to the GWZ alloy and composites to investigate their tensile properties at room temperature and elevated temperature. The microstructural characterizations revealed that the 1 % AlN/Al particles refined the grains from 5.97 to 3.77 μm in the extruded 1AlN/Al-GWZ composite. The introduction of AlN/Al particles promoted the generation of Al 2RE and 18R-LPSO phase in composites. The enrichment of RE and Zn elements and some Mg 5RE nanoparticles were observed along the interface of AlN/α-Mg in the aged 1AlN/Al-GWZ composite. The dominant <0001>//ED texture was changed to <10 1 ̅ 0>//ED texture, while the intensity of <0001>//ED gradually increased with the rising content of AlN particles. After aging treatment, a high-density of γ` and β` precipitates were observed in both the GWZ alloy and its composite. The tensile properties at 250 ℃ revealed that the YS and UTS of the extruded GWZ alloy were enhanced from 241.7 and 304.1 MPa to 270.6 and 326.8 MPa by adding 1AlN/Al, respectively. The ageing treatment further notably increased the YS and UTS of 1AlN/Al-GWZ composite to 339.6 and 380.6 MPa, respectively. The strengthening effect of thermal mismatch, load transfer, grain boundary strengthening, second strengthening and dislocation strengthening accounted for the enhanced tensile strength of the composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Microstructures and mechanical properties of titanium-reinforced magnesium matrix composites: review and perspective10.1016/j.jma.2022.07.008 ↗
2. Magnesium-based nanocomposites: a review from mechanical, creep and fatigue properties10.1016/j.jma.2023.08.005 ↗
3. Development of high-strength magnesium alloys with excellent ignition-proof performance based on the oxidation and ignition mechanisms: a review10.1016/j.jma.2022.12.007 ↗
4. Towards designing high mechanical performance low-alloyed wrought magnesium alloys via grain boundary segregation strategy: a review10.1016/j.jma.2024.03.016 ↗
5. Microstructure, electromagnetic shielding effectiveness and mechanical properties of Mg–Zn–Cu–Zr alloys10.1016/j.mseb.2015.03.012 ↗
6. Current development of creep-resistant magnesium cast alloys: a review10.1016/j.matdes.2018.06.032 ↗
7. Effect of tensile direction on mechanical properties and microstructural evolutions of rolled Mg-Al-Zn-Sn magnesium alloy sheets at room and elevated temperatures10.1016/j.jallcom.2018.01.344 ↗
8. Effect of Ca on hot tearing susceptibility of WE43 alloy10.1016/j.jallcom.2024.175451 ↗
9. Creep behavior and dynamic precipitation of highly heat-resistant Mg alloy with low rare-earth content10.1016/j.jallcom.2024.174960 ↗
10. Towards reducing tension-compression yield and cyclic asymmetry in pure magnesium and magnesium-aluminum alloy with cerium addition10.1016/j.msea.2023.145672 ↗
11. Ductility enhancement in Mg-0.2%Ce alloys10.1016/j.actamat.2018.09.023 ↗
12. Clarifying the deformation modes and strengthening mechanisms of Mg-11Gd-5Y-2Zn-0.7Zr with outstanding high-temperature mechanical properties10.1016/j.msea.2023.144638 ↗
13. Microstructures and mechanical properties of a Mg–9Gd−3Y−0.6Zn−0.4Zr (wt%) alloy modified by Y-rich misch metal10.1016/j.msea.2020.140609 ↗
14. Creep behaviors of a highly concentrated Mg-18 wt%Gd binary alloy with and without artificial aging10.1016/j.jallcom.2018.10.013 ↗
15. The interface structure and property of magnesium matrix composites: a review10.1016/j.jma.2024.04.022 ↗
16. Magnesium matrix composite reinforced by nanoparticles – a review10.1016/j.jma.2020.08.018 ↗
17. In-situ synthesis of AlN/Mg-Al composites with high strength and high plasticity10.1016/j.jallcom.2017.01.005 ↗
18. Microstructure evolution of as-cast AlN/AZ91 composites and room temperature compressive properties10.1016/j.jallcom.2018.10.041 ↗
19. Effect of high-temperature hydrogenation on mechanical properties of a Mg-B4C composite10.1016/j.jallcom.2023.172949 ↗
20. The temperature dependence of the Young's modulus of MgSiN2, AlN and Si3N410.1016/S0955-2219(00)00210-7 ↗
21. Room temperature tensile and flexural strength of ceramics in AlN-SiC system10.1016/0955-2219(95)00013-K ↗
22. Distribution control of AlN particles in Mg-Al/AlN composites10.1016/j.jallcom.2016.10.190 ↗
23. Microstructure and lattice parameters of AlN particle-reinforced magnesium matrix composites fabricated by powder metallurgy10.1007/s40195-015-0333-6 ↗
24. Study on tensile properties and microstructure of cast AZ91D/AlN nanocomposites10.1016/j.msea.2008.04.070 ↗
25. Microstructure, mechanical properties and creep of magnesium alloy Elektron21 reinforced with AlN nanoparticles by ultrasound-assisted stirring10.1016/j.msea.2016.02.042 ↗
26. Individual/synergistic effects of Al and AlN on the microstructural evolution and creep resistance of Elektron21 alloy10.1016/j.msea.2020.139072 ↗
27. Grain refinement by AlN particles in Mg–Al based alloys10.1016/j.jallcom.2008.12.029 ↗
28. Evolutions of microstructure and mechanical properties for Mg-Al/AlN composites under hot extrusion10.1016/j.msea.2016.05.033 ↗
29. Simultaneously enhancing the strength and ductility of as-extruded AlN/AZ91 composites via nano-precipitation and pyramidal slip10.1016/j.jmst.2023.06.039 ↗
30. Interfacial modification using matrix alloying in Mg/CNT composites for improved mechanical performance10.1007/s11665-019-04068-1 ↗
31. Microstructure and mechanical properties of magnesium matrix composite reinforced with carbon nanotubes by ultrasonic vibration10.1007/s12598-015-0561-y ↗
32. Optimizing LPSO phase to achieve superior heat resistance of Mg–Gd–Y–Zn–Zr alloys by regulating the Gd/Y ratios10.1016/j.jmrt.2023.06.278 ↗
33. Recent developments in high-strength Mg-RE-based alloys: focusing on Mg-Gd and Mg-Y systems10.1016/j.jma.2018.08.001 ↗
34. Achieving outstanding heat-resistant Mg-Gd-Y-Zn-Mn alloy via introducing RE/Zn segregation on α-Mn nanoparticles10.1016/j.scriptamat.2023.115672 ↗
35. Effect of Ti particles size on the microstructure and mechanical properties of TiP/VW94
36. Enhanced mechanical properties of Mg-Gd-Y-Zn-Mn alloy by tailoring the morphology of long period stacking ordered phase10.1016/j.msea.2018.07.050 ↗
37. Effects of native AlN particles on heterogeneous nucleation in an Al-3Fe alloy10.1007/s11661-020-06108-1 ↗
38. High performance Mg-8Gd-4Y-1Zn-0.5Al alloy with long-period stacking ordered structure by hot rolling10.1016/j.jallcom.2022.163667 ↗
39. Solute segregation and precipitation in a creep-resistant Mg–Gd–Zn alloy10.1016/j.actamat.2008.08.025 ↗
40. The main strengthening phases transformation and their strengthening mechanisms in as-cast Mg-Gd-(Y)-Zn alloys: a review10.1016/j.jallcom.2023.171782 ↗
41. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
42. Precipitation in a Mg–10Gd–3Y–0.4Zr (wt%) alloy during isothermal ageing at 250°C10.1016/j.jallcom.2005.11.046 ↗
43. Round robin crystal orientation measurement using EBSD for damage assessment
44. Revealing the role of Al in the microstructural evolution and creep properties of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloy10.1016/j.msea.2021.142358 ↗
45. Deformation behaviors and the related high-temperature mechanical properties of Mg–11Gd–5Y–2Zn–0.7Zr via regulating extrusion temperatures10.1016/j.jmrt.2023.07.213 ↗
46. Current progress of research on heat-resistant Mg alloys: a review10.1007/s12613-023-2802-7 ↗
47. Improving the Young's modulus of Mg via alloying and compositing – a short review10.1016/j.jma.2022.07.011 ↗
48. Effects of trace Al addition on the microstructure, hot deformation behavior and mechanical properties of high-strength Mg-Gd-Y-Zn magnesium alloy10.1007/s11661-019-05451-2 ↗
49. Re-evaluation of the mechanical properties and creep resistance of commercial magnesium die-casting alloy AE4410.1016/j.jma.2021.04.016 ↗
50. Supplemental Literature Review of Binary Phase Diagrams: Al-Nd, Al-Sm, Al-V, Bi-Yb, Ca-In, Ca-Sb, Cr-Nb, Cu-Ga, Ge-O, Pt-Sn, Re-Y, and Te-Yb10.1007/s11669-016-0452-4 ↗
51. Influences of Al and high shearing dispersion technique on the microstructure and creep resistance of Mg-2.85Nd-0.92Gd-0.41Zr-0.29Zn alloy10.1016/j.msea.2019.138215 ↗
52. Increasing the high-temperature mechanical properties of Mg-Gd-Y-Zn alloys by adding AlN/Al particles10.1016/j.jmrt.2024.09.177 ↗
53. 2 - Fillers – Origin, Chemical Composition, Properties, and Morphology
54. Grain refinement of AZ91D magnesium alloy by SiC10.1016/j.jallcom.2010.03.002 ↗
55. Crystallographic study of grain refinement in aluminum alloys using the edge-to-edge matching model10.1016/j.actamat.2004.11.037 ↗
56. Edge-to-edge matching model for predicting orientation relationships and habit planes—the improvements10.1016/j.scriptamat.2005.01.040 ↗
57. The crystal structure of the LPSO phase of the 14H-type in the Mg–Al–Gd alloy system10.1016/j.intermet.2012.06.010 ↗
58. The most stable crystal structure and the formation processes of an order-disorder (OD) intermetallic phase in the Mg–Al–Gd ternary system10.1080/14786435.2013.790566 ↗
59. A formation criterion for Order-Disorder (OD) phases of the Long-Period Stacking Order (LPSO)-type in Mg-Al-RE (Rare Earth) ternary systems10.1038/s41598-017-12506-0 ↗
60. Influence of stacking fault energy on formation of long period stacking ordered structures in Mg–Zn–Y–Zr alloys10.1016/S1002-0071(12)60087-2 ↗
61. Unveiling precipitation behavior in Mg-Y based alloys10.1016/j.matdes.2021.109570 ↗
62. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
63. Periodic segregation of solute atoms in fully coherent twin boundaries10.1126/science.1229369 ↗
64. Precipitation hardening of an Mg–5Zn–2Gd–0.4Zr (wt%) alloy10.1016/j.actamat.2016.01.053 ↗
65. Achieving extraordinary thermal stability of fine-grained structure in a dilute magnesium alloy10.1080/21663831.2022.2106797 ↗
66. Effect of Sm on microstructures and mechanical properties of Mg–Gd(–Sm)–Zr alloys by hot extrusion and aging treatment10.1016/j.jmrt.2022.06.128 ↗
67. Dislocations-induced precipitates and their effect on mechanical properties of Mg-Gd-Y-Zr alloy10.1016/j.jma.2019.05.009 ↗
68. Aging Behavior of As-Extruded Ti Particles Reinforced VW94 Composites10.1007/s40195-023-01595-8 ↗
69. 1 - Current developments in wrought magnesium alloys
70. Hot deformation behavior and processing maps of hybrid SiC and CNTs reinforced AZ61 alloy composite10.1016/j.jallcom.2021.159098 ↗
71. Effect of SiC particles and the particulate size on the hot deformation and processing map of AZ91 magnesium matrix composites10.1016/j.msea.2017.09.056 ↗
72. A comprehensive investigation on the effect of SiCp on microstructure and mechanical properties of Mg–5Sb-based hybrid composites10.1016/j.msea.2024.146839 ↗
73. Formation mechanism of the abnormal texture during extrusion in Mg-Y-Sm-Zn-Zr alloy10.1016/j.jallcom.2019.153477 ↗
74. On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys10.1016/j.actamat.2010.08.031 ↗
75. The influence of the LPSO on the deformation mechanisms and tensile properties at elevated temperatures of the Mg-Gd-Zn-Mn alloys10.1016/j.jmrt.2023.02.154 ↗
76. Optimizing the microstructures and enhancing the mechanical properties of AZ81 alloy by adding TC4 particles10.1016/j.msea.2022.144518 ↗
77. Growth of bulk AlN crystals
79. Intermetallics in magnesium alloys10.1002/adem.200500202 ↗
80. Clarifying the deformation modes and strengthening mechanisms of Mg-11Gd-5Y-2Zn-0.7Zr with outstanding high-temperature mechanical properties10.1016/j.msea.2023.144638 ↗
81. High strength and high ductility Mg-Gd-Y-Zn-Zr alloys obtained by controlling texture and dynamic precipitation through LPSO phase structure of different initial morphologies10.1016/j.jre.2024.06.042 ↗
82. Mechanical properties of newly developed age hardenable Mg-3.2 mol%Gd-0.5 mol%Zn casting alloy10.2320/matertrans.L-MRA2008830 ↗
83. Characterization and strengthening effects of γ′ precipitates in a high-strength casting Mg-15Gd-1Zn-0.4Zr (wt%) alloy10.1016/j.matchar.2017.02.010 ↗
84. Effects of precipitate shape and orientation on dispersion strengthening in magnesium alloys10.1016/S1359-6462(02)00497-9 ↗
85. Mechanical properties and Hall-Petch relationship of the extruded Mg-Zn-Y alloys with different volume fractions of icosahedral phase10.1016/j.jallcom.2018.08.121 ↗