Sintering process optimization of the additively manufactured pure copper parts through the metal paste deposited process
Source abstract
Abstract
The fabrication process, sintering cycles through two sintering methods, microstructural and texture characterization, mechanical properties, and electrical conductivity of metal paste-deposited copper parts were investigated in this study. In the first condition, samples were air-debinded for carbon content removal followed by a sintering cycle. A sintering profile with the maximum sintering temperature and time of 1080 °C and 1 hr was implemented after performing the air-debinding cycle at 250 °C for 2 hrs. In the second condition, samples were sintered in the environment of copper oxide for carbon removal in the early stages of the sintering cycle, i.e., 1070 °C for 1 hr and 1080 °C for 1,2, and 3 hrs. The microstructural observations revealed coarser grains in the air-debinded samples, perhaps due to additional generated heat during carbon oxide formation, which may produce destructive effects on the boundary (HAGBs, twins, and CSL) volume and densification behavior of copper parts. However, through the second method, much finer grains and higher densities of boundaries were detected in the microstructure. Using the second sintering method and owing to the less carbon content and based on the density of boundaries and their configurations, higher electrical conductivity (98.4±1.3 % IACS) was recorded by sintering the green parts. The comparison between the data from this study with other parts printed through other additive manufacturing techniques demonstrated superior electrical conductivity level and acceptable balance between strain and strain notably with the sample sintered for 3 hrs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Laser powder bed fusion of pure copper electrodes10.1016/j.matdes.2024.112742 ↗
2. Electrical resistivity of pure copper processed by medium-powered laser powder bed fusion additive manufacturing for use in electromagnetic applications
3. Optimum strength and ductility of pure copper fabricated by Wire Arc Additive Manufacturing
4. Study on the Influence of Additive Manufacturing Process Parameters on Internal-channel Part Geometrical Quality10.1016/j.procir.2022.10.032 ↗
5. Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges10.1016/j.mser.2021.100648 ↗
6. A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement10.1016/j.jmapro.2018.08.001 ↗
7. Additive manufacturing and casting technology comparison: mechanical properties, productivity, and cost benchmark
8. Heat treatment, microstructure, texture, and mechanical properties of electron beam melted Ti6Al4V10.1016/j.jallcom.2024.176265 ↗
9. A study on the mechanical and electrical properties of high-strength CuCrZr alloy fabricated using laser powder bed fusion10.1016/j.jallcom.2022.166627 ↗
10. Anisotropic material properties of pure copper with fine-grained microstructure fabricated by laser powder bed fusion process
11. High-precision laser powder bed fusion processing of pure copper
12. Influence of selective laser melting process parameters on texture evolution in pure copper10.1016/j.jmatprotec.2019.02.022 ↗
13. A review on copper alloys with high strength and high electrical conductivity
14. Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique
15. A review on the fused deposition modeling (FDM) 3D printing: Filament processing, materials, and printing parameters10.1515/eng-2021-0063 ↗
16. Processing of copper by extrusion-based additive manufacturing
17. Comparison of stainless steel 316L parts made by FDM-and SLM-based additive manufacturing processes10.1007/s11837-018-3207-3 ↗
18. Influence of specimen layout on 17-4PH (AISI 630) alloys fabricated by low-cost additive manufacturing10.1007/s11661-021-06211-x ↗
19. A comprehensive study on fused filament fabrication of Ti-6Al-4V structures
20. Copper extrusion 3D printing using metal injection moulding feedstock: Analysis of process parameters for green density and surface roughness optimization
21. Rapid production of AZ91 Mg alloy by extrusion based additive manufacturing process10.1080/00325899.2021.1911457 ↗
22. Fabrication of 3D printed metal structures by use of high-viscosity Cu paste and a screw extruder10.1007/s11664-014-3601-8 ↗
23. Development of copper powder paste for direct printing and soft mold casting
24. Process parameter optimization of extrusion-based 3D metal printing utilizing PW–LDPE–SA binder system10.3390/ma10030305 ↗
25. A review on additive manufacturing of pure copper10.3390/coatings11060740 ↗
26. Effect of size, morphology, and synthesis method on the thermal and sintering properties of copper nanoparticles for use in microscale additive manufacturing processes
27. Effect of morphology and content of nano-C on grain growth behavior of copper matrix composites10.1016/j.jmrt.2021.08.151 ↗
28. Metal FDM, a new extrusion-based additive manufacturing technology for manufacturing of metallic parts: a review10.1007/s40964-021-00250-x ↗
29. Role of temperature and preexisting dislocation network on the shock compression of copper crystals10.1016/j.ijplas.2023.103599 ↗
30. Additive manufacturing of high strength copper alloy with heterogeneous grain structure through laser powder bed fusion10.1016/j.actamat.2021.117311 ↗
31. From austenitic stainless steel to expanded austenite-S phase: Formation, characteristics, and properties of an elusive metastable phase10.3390/met10020187 ↗
32. On annealing twins and CSL distributions in fcc polycrystals10.1002/pssa.2211310216 ↗
33. Constrained minimal-interface structures in polycrystalline copper with extremely fine grains10.1126/science.abe1267 ↗
34. In situ atomic-scale observation of grain size and twin thickness effect limit in twin-structural nanocrystalline platinum10.1038/s41467-020-14876-y ↗
35. Grain boundary faceting close to the Σ3 coincidence misorientation in copper10.1515/ijmr-2004-0172 ↗
36. Faceting of Twin Grain Boundaries in High-Purity Copper Subjected to High Pressure Torsion10.1002/adem.201900589 ↗
37. Grain boundary evolution during low-strain grain boundary engineering achieved by strain-induced boundary migration in pure copper10.1016/j.msea.2021.142532 ↗
38. Twin boundary structure and mobility10.1016/j.actamat.2021.117316 ↗
39. Nucleation and growth of twin interfaces in fcc metals and alloys
40. Study of annealing twins in FCC metals and alloys10.1007/BF02647209 ↗
41. Lu, Y., et al., Studying electrical conductivity using a 3D printed four-point probe station. 2017, ACS Publications.10.1021/acs.jchemed.7b00119 ↗
42. European Copper Institute 2020 Copper as electrical conductive material with above standard performance properties (https://conductivity-app.org/) accessed 20 April 2021.
43. Effect of carbon nanotubes’ addition on mechanical properties and thermal conductivity of copper10.1007/s10853-019-03858-1 ↗
44. Process development of 99.95% pure copper processed via selective electron beam melting and its mechanical and physical properties10.1016/j.matchar.2018.04.009 ↗
45. Thermal and Electrical Conductivity of 99.9% Pure Copper Processed via Selective Electron Beam Melting10.1002/adem.201600078 ↗
46. Fabricating Copper Components with Electron Beam Melting
47. Laser-based powder bed fusion additive manufacturing of pure copper
48. Mechanical and electrical properties of selective laser-melted parts produced from surface-oxidized copper powder
49. Microstructure and mechanical properties of pure copper manufactured by selective laser melting10.1016/j.msea.2020.139615 ↗
50. Pure copper components fabricated by cold spray (CS) and selective laser melting (SLM) technology10.1016/j.surfcoat.2020.125936 ↗
51. Influence of carbon nanoparticle addition (and impurities) on selective laser melting of pure copper10.3390/ma12152469 ↗
52. Rodriguez, J., Vicente, J.I., Ezeiza, J.C., Zuriarrain, A., Arrazola, P.J., Badiola, X., … & Soler, D. (2021, October). Mechanical and electrical properties of additively manufactured copper. In IOP Conference Series: Materials Science and Engineering (Vol. 1193, No. 1, p. 012034). IOP Publishing.10.1088/1757-899X/1193/1/012034 ↗
53. Mechanical, electrical, and thermal characterization of pure copper parts manufactured via material extrusion additive manufacturing10.3390/ma15134644 ↗
54. Markforged pure copper metal-polymer filament datasheet. Available online: https://www-objects.markforged.com/craft/ materials/Copper-V1.1.pdf (accessed on 23 February 2022).
55. Impacts of process-induced porosity on material properties of copper made by binder jetting additive manufacturing