journal article·2024-12

Ultrafine-grained Al-La-Mg-Mn alloy fabricated by melt spinning and hot extrusion with ultrahigh strength and thermal stability

Tao Ban, Zhi Wang, Liejun Li, Zhuoran Li, Xinkui Zhang, Zhengwu Peng

Publisher page

Abstract

To enhance the mechanical properties of Al–(La, Ce) alloys, melt spinning and hot extrusion were employed to fabricate Al-La-Mg-Mn alloy with an ultrafine-grained structure (∼0.56 μm). The as-extruded alloy exhibits the highest tensile strength of 621 ± 4 MPa among Al–(La, Ce) alloys fabricated by various methods while retaining an appreciable elongation of 6.8 ± 1.1 %. The high strength is mainly ascribed to the ultrafine grains and high-volume intermetallics, conferring robust grain boundary strengthening and Orowan strengthening effects. Additionally, this study delved into the high-temperature (400°C) coarsening behavior of the intermetallic and grain size. The findings unveil an exceptionally low coarsening rate of the intermetallic at 400°C (3.19×10 −33 m 4 s −1), accompanied by only slight grain coarsening, underscoring the remarkable thermal stability of the ultrafine-grained structure.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity10.1126/science.aav7086 ↗
2. High-strength and crack-free welding of 2024 aluminium alloy via Zr-core-Al-shell wire10.1038/s41467-024-45660-x ↗
3. Facile route to bulk ultrafine-grain steels for high strength and ductility10.1038/s41586-021-03246-3 ↗
4. Ultrafine grained metals and metal matrix nanocomposites fabricated by powder processing and thermomechanical powder consolidation10.1016/j.pmatsci.2021.100796 ↗
5. Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing10.1016/j.actamat.2014.10.025 ↗
6. Prominent role of high-volume fraction Mg17Al12 dynamic precipitations on multimodal microstructure formation and strength-ductility synergy of Mg–Al–Zn alloys processed by hard-plate rolling (HPR)10.1016/j.msea.2021.140920 ↗
7. Effect of annealing on microstructure, strength and electrical conductivity of the pre-aged and HPT-processed Al-0.4Zr alloy10.1016/j.jallcom.2018.12.324 ↗
8. Significant strengthening effect in ultra-fine grained Al alloy made by fast solidification and hot extrusion processes10.1016/j.jmrt.2021.12.115 ↗
9. Thermal stability, microstructure evolution and grain growth kinetics of ultrafine grained Al 7075 alloy processed by cryogenic temperature extrusion machining10.1016/j.jallcom.2023.169900 ↗
10. A novel method for improving the microstructure and the properties of Al-Si-Cu alloys prepared using rapid solidification/powder metallurgy
11. An ultrafine-grained low-activation multicomponent alloy with exceptional thermal stability and ultrahigh-temperature mechanical properties
12. Ultrafine grained Al 7075 alloy fabricated by cryogenic temperature large strain extrusion machining combined with aging treatment10.1016/j.msea.2019.138106 ↗
13. An investigation of thermal stability of structure and mechanical properties of Al-0.5Mg–Sc ultrafine-grained aluminum alloys10.1016/j.jallcom.2020.154805 ↗
14. Anticipating impacts of introducing aluminum-cerium alloys into the United States automotive market10.1016/j.resconrec.2019.02.009 ↗
15. Strength mechanisms and tunability in Al-Ce-Mg ternary alloys enabled by additive manufacturing10.1016/j.matdes.2023.112009 ↗
16. Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing10.1016/j.actamat.2020.07.014 ↗
17. Ultrafine-grained Al–La–Mg–Mn alloy with superior thermal stability and strength-ductility synergy10.1016/j.msea.2023.145035 ↗
18. A novel high-strength Al-La-Mg-Mn alloy for selective laser melting10.1016/j.jmst.2022.07.046 ↗
19. A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy10.1016/j.actamat.2022.117699 ↗
20. Combining solution-, precipitation- and load-transfer strengthening in a cast Al-Ce-Mn-Sc-Zr alloy10.1016/j.actamat.2024.119683 ↗
21. Microstructure and mechanical properties of a rapidly-solidified and extruded Al-13.2Zn-2.5Mg −1.2Cu-0.2Zr alloy and its aging hardening response at 120 °C10.1016/j.msea.2021.141969 ↗
22. Elements of X-Ray Diffraction10.1119/1.1934486 ↗
23. The Ag−Al (Silver-Aluminum) system10.1007/BF02879428 ↗
24. Effects of melt spinning process parameters and wheel surface quality on production of 6060 aluminum alloy powders and ribbons10.1016/S1003-6326(20)65287-6 ↗
25. Microstructure and mechanical properties of a high-Zn aluminum alloy prepared by melt spinning and extrusion10.1016/j.jallcom.2019.152990 ↗
26. Annealing-induced strengthening and stabilization in ultrafine-grained Al and Al–Mg alloys prepared by rapid powder consolidation10.1016/j.msea.2021.142539 ↗
27. Optimization of heat treatment for an Al–Mg–Sc–Mn–Zr alloy with ultrafine grains manufactured by laser powder bed fusion10.1016/j.matchar.2022.111977 ↗
28. Post-heat treatment of laser powder bed fusion fabricated Al–La–Mg–Mn alloy: On intermetallic morphology control and strength-ductility balance
29. Criteria for developing castable, creep-resistant aluminum-based alloys – A review10.1515/ijmr-2006-0042 ↗
30. The effects of ultrasonic vibration on Portevin–Le Chatelier (PLC) effect and stress-strain behavior in aluminum alloy 202410.1016/j.scriptamat.2022.115121 ↗
31. The Portevin–Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy10.1016/j.actamat.2007.03.007 ↗
32. Improved tensile strength of Al-5Ce alloy by permanent magnet stirring10.1007/s11661-020-05723-2 ↗
33. Cerium-based, intermetallic-strengthened aluminum casting alloy: high-volume co-product development10.1007/s11837-016-1943-9 ↗
34. Beneficial effects of Sc/Zr addition on hypereutectic Al–Ce alloys: modification of primary phases and precipitation hardening10.1016/j.msea.2022.142611 ↗
35. Refining mechanism and elevated-temperature mechanical properties of Al-Ce alloys solidified under super gravity field10.1016/j.msea.2023.145191 ↗
36. Improved high-temperature aluminum alloys containing cerium10.1007/s11665-019-3884-2 ↗
37. Enhanced load transfer and ductility in Al–9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing10.1016/j.msea.2021.141591 ↗
38. Microstructure and properties of additively manufactured Al–Ce–Mg alloys10.1038/s41598-021-86370-4 ↗
39. Microstructure and properties of novel heat resistant Al–Ce–Cu alloy for additive manufacturing10.1007/s12540-018-00211-0 ↗
40. An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: Microstructure, mechanical properties and thermal stability10.1016/j.msea.2023.144965 ↗
41. Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property10.1007/s10853-020-05037-z ↗
42. Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy10.1016/j.actamat.2021.117285 ↗
43. High strength aluminum-cerium alloy processed by laser powder bed fusion
44. Effect of precipitation-forming elements in a near-eutectic Al-Ce alloy for Laser Powder Bed Fusion
45. Achieving high damping capacity and strength simultaneously in a high-zinc aluminum alloy via melt spinning and hot extrusion10.1016/j.msea.2021.142376 ↗
46. Dynamic recrystallization behavior and mechanical properties response of rheo-extruded Al–Mg alloys with various Mg contents10.1016/j.msea.2022.143450 ↗
47. Effect of Mg content on the minimum grain size of Al–Mg alloys obtained by friction stir processing10.1016/j.scriptamat.2010.10.033 ↗
48. Systematic study of stacking fault energies of random Al-based alloys10.1016/S1359-6454(97)00432-1 ↗
49. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
50. Dynamic recrystallization behaviors of high Mg alloyed Al-Mg alloy during high strain rate rolling deformation10.1016/j.msea.2019.03.028 ↗
51. Dynamic softening mechanisms and Zener-Hollomon parameter of Al–Mg–Si–Ce–B alloy during hot deformation10.1016/j.jmrt.2021.11.081 ↗
52. Strengthening mechanisms in solid solution aluminum alloys10.1007/s11661-006-0142-7 ↗
53. Coarsening kinetics and strengthening mechanisms of core-shell nanoscale precipitates in Al-Li-Yb-Er-Sc-Zr alloy10.1016/j.jmst.2020.05.061 ↗
54. Microstructure evolution and mechanical behavior of a binary Al–7Mg alloy processed by equal-channel angular pressing10.1016/j.actamat.2014.10.025 ↗
55. The influence of silicon in tempered martensite: Understanding the microstructure–properties relationship in 0.5–0.6wt% C steels10.1016/j.actamat.2014.01.039 ↗
56. Orowan strengthening and forest hardening superposition examined by dislocation dynamics simulations10.1016/j.actamat.2010.06.028 ↗
57. Superior mechanical properties of a selective-laser-melted AlZnMgCuScZr alloy enabled by a tunable hierarchical microstructure and dual-nanoprecipitation10.1016/j.mattod.2021.11.019 ↗
58. Simultaneous improvement in strength and plasticity of Ti-24Nb-4Zr-8Sn manufactured by selective laser melting10.1016/j.matdes.2018.07.036 ↗
59. Synergic strength-ductility enhancement in bimodal titanium alloy via a heterogeneous structure induced by the slip
60. Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models10.1016/j.jallcom.2015.11.002 ↗
61. The kinetics of precipitation from supersaturated solid solutions10.1016/0022-3697(61)90054-3 ↗
62. The effect of heat treatment on Mg2Si coarsening in aluminum 6105 alloy10.1007/s11661-004-0354-7 ↗
63. Precipitate coarsening and mechanical properties in 6082 aluminium alloy during long-term thermal exposure
64. Theoretical and experimental study of precipitation and coarsening kinetics of θ′ phase in Al–Cu alloy10.1016/j.vacuum.2021.110263 ↗
65. Coarsening kinetics of nanoscale Al3Sc precipitates in an Al–Mg–Sc alloy10.1016/j.actamat.2005.05.025 ↗
66. The effect of thermal exposure on the microstructure and mechanical properties of cast Al-Si alloy for the cylinder head