Investigation of the role of Ni addition in nano-crystallization of Fe-based amorphous alloys
Source abstract
Abstract
The influence of Ni addition on Fe-based nano-crystalline alloys during the nano-crystallization process is extensively studied by using first-principles molecular dynamics simulations and experiments. It was found that during the nucleation stage, Ni enhances the initial crystallization tendency by increasing the free energy difference between the amorphous and nano-crystalline structures, while prolonging the nano-crystallization process by capturing surrounding non-metallic elements. During grain growth stage, Ni addition effectively reduces the diffusion ability of P but increases that of Si and B, thereby limiting the ability of Ni to suppress grain growth by constraining elemental rearrangement. Regarding magnetic properties, samples were ultra-rapidly annealed at 773 K to achieve optimal crystallization process, with magnetic coercivity of 3.9 and 6.5 A/m for ribbons with and without Ni addition, respectively, and saturated magnetic flux density values of both approximately 1.78 T. The grain sizes were 21.0 and 21.5 nm, respectively. Therefore, certain amount of Ni addition can effectively reduce the coercivity of nano-crystalline alloys without significantly deteriorating the saturated magnetic flux density, but its ability of inhibit grain growth is limited.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Electrodeposition and Electroless Coatings · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A review of the preparation, machining performance, and application of Fe-based amorphous alloys10.3390/pr10061203 ↗
2. Advances in Fe-based amorphous/nanocrystalline alloys10.1063/5.0092662 ↗
3. H. Zhang, Y. Wu, J. Zeng, T. Liu, S. Mo, H. NiCalculation assisted composition design of Fe-based amorphous alloys, J. Journal of Non-Crystalline Solids. 600 (2023) 122011.10.1016/j.jnoncrysol.2022.122011 ↗
4. Crystallization kinetics of Fe based amorphous alloy
5. Soft magnetic properties of Fe-based amorphous/nanocrystalline hybrid materials, J10.1016/j.powtec.2018.08.037 ↗
6. Interfacial characteristic and microstructure of Fe-based amorphous coating on magnesium alloy10.1016/j.surfcoat.2021.127659 ↗
7. Formation mechanism of Fe-based amorphous powders produced by spark erosion10.1016/j.jmst.2023.06.027 ↗
8. The complementary effects of Fe and metalloids on the saturation magnetization of Fe-based amorphous alloys10.1016/j.intermet.2021.107116 ↗
9. Effect of P on glass forming ability, magnetic properties and oxidation behavior of FeSiBP amorphous alloys10.1016/j.intermet.2016.12.024 ↗
10. Development and industrialization of Zr- and Fe-based bulk metallic glasses and light metal-based metastable alloys10.1016/j.jallcom.2024.173546 ↗
11. Development and application of Fe-based soft magnetic bulk metallic glassy inductors10.1016/j.jallcom.2017.08.240 ↗
12. Soft magnetic properties of Fe82-83B14-15Si2C0.5-1 amorphous alloys with high saturation magnetization above 1.7 T10.1016/j.jnoncrysol.2018.07.072 ↗
13. Soft magnetic Fe-Co-based amorphous alloys with extremely high saturation magnetization exceeding 1.9 T and low coercivity of 2 A/m10.1016/j.jallcom.2017.06.192 ↗
14. Excellent soft magnetic Fe-Co-B-based amorphous alloys with extremely high saturation magnetization above 1.85 T and low coercivity below 3 A/m10.1016/j.jallcom.2017.03.341 ↗
15. Ultra-fine microstructure and exceptional low coercivity developed in a high-Bs Fe-Si-B-P alloy by co-alloying Ni, Mo, and Cu10.1016/j.scriptamat.2023.115666 ↗
16. Decreasing the sensitivity of soft magnetic properties to heat-treatment process parameters by minor Nb alloying in Fe83C4B6.5P5.5Cu1 nanocrystalline alloys10.1016/j.intermet.2024.108335 ↗
17. Effects of Si addition on crystallization process and soft magnetic properties of high-Fe and high-Cu-content Fe–Si–B–P–Cu nanocrystalline alloys10.1016/j.jmrt.2024.05.014 ↗
18. Comparative study of the magnetic properties and glass-forming ability of Fe-based bulk metallic glass with minor Mn, Co, Ni, and Cu additions, J10.1007/s40195-016-0459-1 ↗
19. Nanoscale structural heterogeneity and magnetic properties of Fe-based amorphous alloys via Co and Ni additions10.1016/j.jallcom.2022.164067 ↗
20. Dramatic grain refinement and magnetic softening induced by Ni addition in Fe B based nanocrystalline soft magnetic alloys10.1016/j.scriptamat.2020.02.020 ↗
21. Atomic-level understanding of weakening crystallization in additive manufactured ternary Fe-based metallic glasses with Ni addition10.1016/j.jnoncrysol.2022.121435 ↗
22. Unusual alloying effects of Co and Ni on structure and magnetic properties of Fe-Si-B-Cu nanocrystalline alloys with pre-existing α-Fe nanocrystals10.1016/j.jallcom.2022.166030 ↗
23. First principle study on the Si effect in the Fe-based soft magnetic nano-crystalline alloys10.1016/j.jallcom.2017.09.311 ↗
24. Nano-crystallization and magnetic mechanisms of Fe85Si2B8P4Cu1 amorphous alloy by ab initio molecular dynamics simulation10.1063/1.4875483 ↗
25. Ab initio molecular dynamics simulations of nano-crystallization of Fe-based amorphous alloys with early transition metals
26. Effects of a small amount of B addition on the geometric structure, electronic structure and magnetic properties of FePC amorphous alloys10.1016/j.jnoncrysol.2023.122510 ↗
27. Atomic, electronic and magnetic properties of Fe80P11C9 amorphous alloy: a first-principles study10.1016/j.physb.2012.11.044 ↗
28. The atomic structure, magnetic properties and bending ductility of a novel Fe-P-C-B-Si amorphous alloy investigated by experiments and ab initio molecular dynamics10.1016/j.jallcom.2022.164101 ↗
29. Investigation on the crystallization mechanism difference between FINEMET® and NANOMET® type Fe-based soft magnetic amorphous alloys10.1063/1.4964433 ↗
30. Exceptionally high saturation magnetic flux density and ultralow coercivity via an amorphous-nanocrystalline transitional microstructure in an FeCo-based alloy10.1002/adma.202205863 ↗
31. Atomic packing and short-to-medium-range order in metallic glasses
32. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element
33. Effect of Ni on the microstructure and precipitate phases of Fe78Si9B13 glassy alloy10.1016/j.jallcom.2009.06.036 ↗
34. Microstructure, particle size, and magnetic property of Fe-6.5 wt% Si nanocrystalline alloys prepared by mechanical alloying10.1007/s11837-023-06300-9 ↗
35. Nanocrystalline Fe-Si phase bymechanical attrition and its soft magnetic properties10.1016/0965-9773(93)90106-L ↗
36. Effects of Ni and Co alloying on thermal, magnetic and structural properties of Fe-(Ni,Co)-P-C metallic glass ribbons10.1016/j.jallcom.2021.159620 ↗
37. Nanocrystalline (Fe,Co,Ni)86B14 soft magnetic alloys prepared by ultra-rapid annealing10.1016/j.jallcom.2021.162544 ↗
38. Interrelation between structural ordering and magnetic properties in bcc Fe-Si alloys10.1103/PhysRevB.66.014206 ↗
39. Magnetic moments and exchange interactions inFe0.82Ni0.18∕Vbcc (001) multilayers10.1103/PhysRevB.70.094421 ↗