Characterization of Sm-rich phase and properties of hypereutectic Al-Ni alloys modified by Sm
Source abstract
Abstract
The impact of Samarium (Sm) addition on hypereutectic Al-Ni alloys was systematically investigated, focusing on microstructural changes and thermal-physical, mechanical properties. The addition of 0.1–0.5 wt% Sm resulted in the refinement of primary Al 3Ni phases from coarse lath-like structures to small particles, enhancing mechanical properties and reducing thermal expansion coefficients (CTE). Thermal conductivity (TC) improved with 0.1–0.3 wt% Sm addition, but declined at the amount of 0.5 wt%. Excessive Sm addition leads to the formation of a Sm-rich phase, characterized by a two-phase mixed structure of Al 11(Ni, Sm) 3 surrounded by Al 4Sm. Sm addition lowered the precipitation temperature of the primary Al 3Ni phase, inducing significant constitutional undercooling and exhibiting a phase refinement effect. The Al-9Ni-0.3Sm alloy showed excellent performance, with a TC of 211.8 W/(m·K), CTE of 17.3×10 −6/K (@25–100 °C), ultimate tensile strength of 169.5 MPa, and elongation of 10.4 %. Optimal addition of Sm improved TC, mechanical properties as well as reduced the CTE in the Al alloy at the same time and showed a good modification effect.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical and Alloy Processes · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A high-strength heat-resistant Al−5.7Ni eutectic alloy with spherical Al3Ni nano-particles by selective laser melting10.1016/j.scriptamat.2021.114034 ↗
2. E.A. Starke Jr, J.T. Staley, Application of Modern Aluminium Alloys to Aircraft, in: R. Lumley (Ed.) Fundamentals of Aluminium Metallurgy, Woodhead Publishing, USA, 2011, pp. 747-783.10.1533/9780857090256.3.747 ↗
3. Investigation of Al-Zn-Zr and Al-Zn-Ni alloys for high electrical conductivity and strength application10.1016/j.msea.2018.11.111 ↗
4. New generation of eutectic Al-Ni casting alloys for elevated temperature services10.1016/j.msea.2017.10.034 ↗
5. Measurements of the microhardness, electrical and thermal properties of the Al–Ni eutectic alloy10.1016/j.matdes.2011.05.030 ↗
6. Effects of trace ytterbium addition on microstructure, mechanical and thermal properties of hypoeutectic Al–5Ni alloy10.1016/j.jre.2021.09.019 ↗
7. Relationship between spacing of eutectic colonies and tensile properties of transient directionally solidified Al-Ni eutectic alloy10.1016/j.jallcom.2017.10.288 ↗
8. The Al-Al3Ni eutectic reaction: crystallography and mechanism of formation10.1007/s11661-015-3051-9 ↗
9. A new sight of the growth characteristics of solidified Al3Ni at the liquid–solid interface by synchrotron radiography and 3D tomography10.1007/s11661-020-05729-w ↗
10. Continuous morphological transition and its mechanism of Al3Ni phase at the liquid–solid interface during solidification10.1007/s11661-018-5059-4 ↗
11. Competitive growth of leading phase and tensile properties of directionally solidified eutectic Al–Ni alloy10.1016/j.msea.2019.138887 ↗
12. Development of high-strength high-temperature cast Al-Ni-Cr alloys through evolution of a novel composite eutectic structure10.1007/s11661-017-4369-2 ↗
13. Change of intermetallic phases and mechanical features in rapidly solidified hypereutectic Al–3Ni–3Sb alloy10.1007/s00339-021-04982-z ↗
14. Microstructures and mechanical properties of Al-2Fe-xCo ternary alloys with high thermal conductivity10.3390/ma13173728 ↗
15. Investigation of the thermo-electrical properties of A707 alloys10.1016/j.tca.2019.01.028 ↗
16. Thermal and electrical conductivity in Al–Si/Cu/Fe/Mg binary and ternary Al alloys10.1007/s10853-015-9115-9 ↗
17. Effect of solute atoms and second phases on the thermal conductivity of Mg-RE alloys: a quantitative study10.1016/j.jallcom.2018.03.070 ↗
18. Thermal and electrical conductivity of binary magnesium alloys10.1007/s10853-013-8012-3 ↗
19. On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition10.1016/j.actamat.2019.03.025 ↗
20. Thermodynamics of the Al3Ni phase and revision of the Al–Ni system10.1016/j.tca.2010.10.005 ↗
21. Modification mechanisms of hypereutectic Al-Fe alloys treated by Sm/Yb addition: experiments and first-principles calculations10.1016/j.jallcom.2023.169786 ↗
22. Phase relations of the Sm–Ni–Al ternary system at 500°C in the 40–100at% Al region10.1016/j.intermet.2008.07.010 ↗
23. Characterization of the solidification behavior, microstructure and mechanical properties of aluminum alloy 6063 with samarium addition10.1016/j.jallcom.2022.167234 ↗
24. Effect of samarium doping on the nucleation of fcc-aluminum in undercooled liquids10.1016/j.scriptamat.2018.06.001 ↗
25. Application of Neumann–Kopp rule for the estimation of heat capacity of mixed oxides10.1016/j.tca.2009.08.002 ↗
26. Determination of thermal diffusivity and thermal conductivity of Mg–Al alloys10.1016/S0921-5093(02)00233-2 ↗
27. Microstructure and thermal-physical properties of hypereutectic Al-Ni alloys10.1016/j.jmrt.2023.04.168 ↗
28. Quality evaluation of A357 cast aluminum alloy specimens subjected to different artificial aging treatment10.1016/j.matdes.2003.11.007 ↗
29. The bimodal effect of La on the microstructures and mechanical properties of in-situ A356–TiB2 composites10.1016/j.matdes.2015.07.031 ↗
30. Design and preparation of Al-Fe-Ce ternary aluminum alloys with high thermal conductivity10.1016/S1003-6326(22)65908-9 ↗
31. Effect of minor lanthanum on the microstructures, tensile and electrical properties of Al-Fe alloys10.1016/j.matdes.2020.108991 ↗
32. Okamoto · J. Ph. Equilibria Diffus. · 2004 · 25 · 39410.1007/s11669-004-0163-0 ↗
33. Preparation of high purity metals by crystallization methods
34. The law of Wiedemann and Franz10.1088/0370-1328/77/5/309 ↗