Microstructural evolution, mechanical and tribological properties of thick Cr-N coatings prepared by MPCVD
Source abstract
Abstract
Thick Cr-N coatings were prepared rapidly by microwave plasma chemical vapor deposition (MPCVD), and the evolution of composition, microstructure, mechanical, and tribological properties were investigated. XRD indicated that the Cr-N coatings consisted of hcp-Cr 2N and fcc-CrN. It was observed that the compressive residual stresses showed an initial increase followed by a decrease as the coating continuously grew. The nitriding reaction of the high-energy microwave plasma accelerated the formation of Cr-N coatings, and the transition of Cr to hcp-Cr 2N and fcc-CrN caused volume expansion, resulting in a dense structure, fine and effectively inhibited the formation of columnar grains, which improved the mechanical properties of the Cr-N coatings. The hard Cr-N coating had low friction and high load capacity, exhibiting excellent wear resistance and adhesion. The ultrahigh load-bearing capacity and best tribological property of the 44.3 µm thick Cr-N coatings could be attributed to the synergistic optimization of residual stresses and coatings thickness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Improved corrosion resistance and mechanical properties of CrN hard coatings with an atomic layer deposited Al2O3 interlayer10.1021/acsami.5b08696 ↗
2. Sealing of hard CrN and DLC coatings with atomic layer deposition10.1021/am404906x ↗
3. Effect of nitrogen pressure on the microstructure, mechanical and electrochemical properties of CrAlN coatings deposited by filter cathode vacuum arc10.1016/j.ceramint.2022.08.216 ↗
4. Industrial applications of CrN (PVD) coatings, deposited at high and low temperatures10.1016/S0257-8972(97)00393-9 ↗
5. Deposition, properties and applications of PVD CrxN coatings10.1016/S0257-8972(99)00021-3 ↗
6. Electroplating of thick hard chromium coating from a trivalent chromium bath containing a ternary complexing agent: A methodological and mechanistic study10.1021/acssuschemeng.0c04529 ↗
7. Improving the uniformity of the coating thickness distribution during electroplating treatment of products using multi anode baths10.1016/j.matpr.2019.07.036 ↗
8. The effect of Bias configuration on the properties of AlCrN based thick coatings deposited by Cathodic Arc Evaporation10.1016/j.apsusc.2022.155543 ↗
9. Microstructure and high-temperature steam oxidation properties of thick Cr coatings prepared by magnetron sputtering for accident tolerant fuel claddings: the role of bias in the deposition process10.1016/j.corsci.2019.108378 ↗
10. Microstructure and properties of nanostructured thick CrN coatings10.1016/j.matlet.2012.08.060 ↗
11. Fabrication and evaluation of diamond thick film-Si3N4 brazed cutting tool by microwave plasma chemical vapor deposition method10.1016/j.jmatprotec.2020.117034 ↗
12. High rate deposition of thick CrN and Cr2N coatings using modulated pulse power (MPP) magnetron sputtering10.1016/j.surfcoat.2010.11.039 ↗
13. Tribological behavior of thick CrN coatings deposited by modulated pulsed power magnetron sputtering10.1016/j.surfcoat.2011.10.053 ↗
14. A comparison of the oxidation behavior of CrN films deposited using continuous dc, pulsed dc and modulated pulsed power magnetron sputtering10.1016/j.surfcoat.2012.01.033 ↗
15. Thick CrN/AlN superlattice coatings deposited by the hybrid modulated pulsed power and pulsed dc magnetron sputtering10.1016/j.surfcoat.2011.11.037 ↗
16. Thick CrN/AlN superlattice coatings deposited by hot filament assisted HiPIMS for solid particle erosion and high temperature wear resistance10.1016/j.surfcoat.2019.124922 ↗
17. Continuously growing ultrathick CrN coating to achieve high load-bearing capacity and good tribological property10.1021/acsami.7b16426 ↗
18. Preparation and characterization of diamond-like carbon (DLC) film on 316L stainless steel by microwave plasma chemical vapor deposition (MPCVD)10.1016/j.diamond.2022.108820 ↗
19. Recent progress of vertical graphene: preparation, structure engineering, and emerging energy applications
20. Fracture mechanics of microcrystalline/nanocrystalline composited multilayer chemical vapor deposition self-standing diamond films10.1016/j.ceramint.2022.04.173 ↗
21. Single crystal diamond growth by MPCVD at subatmospheric pressures, Materials Today
22. Bright silicon vacancy centers in diamond/SiC composite films synthesized by a MPCVD method10.1016/j.carbon.2020.09.032 ↗
23. Advances of microwave plasma-enhanced chemical vapor deposition in fabrication of carbon nanotubes: a review10.1007/s10853-021-06128-1 ↗
24. Growth of carbon nanotubes on diamond with a robust structural connection via microwave plasma chemical vapor deposition10.3390/coatings12121838 ↗
25. Synthesis and properties of electrically conductive/nitrogen grain boundaries incorporated ultrananocrystalline diamond (N-uncd) thin films grown by microwave plasma chemical vapor deposition (mpcvd)10.3390/app11188443 ↗
26. High-rate growth of single-crystal diamond with an atomically flat surface by microwave plasma chemical vapor deposition10.1016/j.tsf.2022.139571 ↗
27. An innovative gas inlet design in a microwave plasma chemical vapor deposition chamber for high-quality, high-speed, and high-efficiency diamond growth
28. Improving AlN crystalline quality by high-temperature ammonia-free microwave plasma chemical vapor deposition10.35848/1882-0786/abf31a ↗
29. In-situ formation, structural transformation and mechanical properties CrN coatings prepared by MPCVD10.1016/j.surfcoat.2022.128522 ↗
30. What's new in GSAS-II10.1017/S0885715614000736 ↗
31. GSAS-II: the genesis of a modern open-source all purpose crystallography software package10.1107/S0021889813003531 ↗
32. Recent developments targeting new and experienced users in EXPGUI, an open source Rietveld analysis interface10.1524/zkri.2011.1378 ↗
33. A.C. Larson, R.B. Von Dreele, Gsas, Report lAUR, (1994) 86-748.
34. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
35. Measurement of residual stress in thermal barrier coating using GIXRD10.1016/j.matpr.2020.09.454 ↗
36. Effect of deposition condition on residual stress of iron nitride thin films prepared by magnetron sputtering and ion implantation10.1016/j.apsusc.2005.04.043 ↗
37. The Young's modulus of chromium nitride films10.1016/j.surfcoat.2003.10.064 ↗
38. Structural, elastic and electronic properties of Cr2N: a first-principles study10.1016/j.commatsci.2014.02.035 ↗
39. Shear-induced structural changes and origin of ultralow friction of hydrogenated diamond-like carbon (DLC) in dry environment10.1021/acsami.7b03360 ↗
40. What is indentation hardness?10.1016/S0257-8972(00)00896-3 ↗
41. Study of adhesion in steels surface hardened10.4028/www.scientific.net/AMR.535-537.513 ↗
42. The VDI 3198 indentation test evaluation of a reliable qualitative control for layered compounds10.1016/S0924-0136(03)00300-5 ↗
43. Effect of sputtering power on the chemical composition, microstructure and mechanical properties of CrNx hard coatings deposited by reactive magnetron sputtering10.1016/j.vacuum.2017.08.036 ↗
44. X-ray diffractometry analysis of rf-magnetron-sputtered chromium/chromium nitride coatings, Surface and Coatings Technology
45. W.L. Sun, Microstructure-property Relationships in Cr (C) N coatings, UNSW Sydney, 2014.
46. S.K. Pal, Synthesis, Characterization and Tribological Behavior of Nitrogen-doped Chromium-diamond-like Carbon Nanocomposite Thin Films, Louisiana State University and Agricultural & Mechanical College 2004.
47. The inorganic crystal structure database (ICSD)—present and future10.1080/08893110410001664882 ↗
48. New developments in the Inorganic Crystal Structure Database (ICSD): accessibility in support of materials research and design10.1107/S0108768102006948 ↗
49. Texture development in polycrystalline CrN coatings: the role of growth conditions and a Cr interlayer10.1088/0022-3727/42/7/075401 ↗
50. A comparative study of structure and residual stress in chromium nitride films deposited by vacuum arc evaporation, ion plating, and DC magnetron sputtering10.1002/pssa.2211580218 ↗
51. Comparison of crack resistance between ternary CrSiC and quaternary CrSiCN coatings via nanoindentation10.1016/j.msea.2015.07.024 ↗
52. A comparative study of the oxidation behavior of Cr2N and CrN coatings10.1016/j.tsf.2013.01.031 ↗
53. Density and thermal expansion of Cr–Fe, Fe–Ni, and Cr–Ni binary liquid alloys10.1007/s10853-013-7274-0 ↗
54. A hybrid plasma treatment of H13 tool steel by combining plasma nitriding and post-oxidation10.1007/s11665-018-3669-z ↗
55. Phase equilibria and multiphase reaction diffusion in the Cr-C and Cr-N systems10.1361/105497199770335929 ↗
56. Characteristics and properties of CrN compound layer produced by plasma nitriding of Cr-electroplated of AISI 304 stainless steel10.1016/j.surfcoat.2020.125450 ↗
57. Structure, mechanical and tribological properties of CrN thick coatings deposited by circular combined tubular arc ion plating10.1016/j.surfcoat.2012.04.041 ↗
58. Structure and mechanical properties of thick r/Cr2N/CrN multilayer coating deposited by multi-arc ion plating10.1016/S1003-6326(15)63708-6 ↗
59. Microstructure and tribological behavior of multilayered CrN coating by arc ion plating10.1016/j.surfcoat.2015.04.045 ↗
60. Thick CrN/TiN multilayers deposited by arc ion plating10.1016/j.vacuum.2011.12.004 ↗
61. The corrosive behavior of Cr/CrN multilayer coatings with different modulation periods10.1016/j.vacuum.2012.02.046 ↗
62. CrN thin films deposited by HiPIMS in DOMS mode10.1016/j.surfcoat.2016.02.064 ↗
63. Miguel, A. Illana, M. Juez-Lorenzo, R. Muelas, Performance of HIPIMS deposited CrN/NbN nanostructured coatings exposed to 650 ℃ in pure steam environment10.1016/j.matchemphys.2016.05.017 ↗
64. Tailoring the chemical composition and microstructure of CrxN deposited by HiPIMS through duty-cycle modifications10.1016/j.surfcoat.2021.127502 ↗
65. Microstructure of thick chromium–nitride coating synthesized using plasma assisted MOCVD technique10.1016/j.surfcoat.2006.02.005 ↗
66. Plasma assisted metal-organic chemical vapor deposition of hard chromium nitride thin film coatings using chromium (III) acetylacetonate as the precursor10.1016/j.msea.2004.03.021 ↗
67. Substrate frequency effects on CrxN coatings deposited by DC magnetron sputtering10.1007/s11665-016-2426-4 ↗
68. Magnetron deposition of chromium nitride coatings using a hot chromium target: influence of magnetron power on the deposition rate and elemental composition10.1016/j.surfcoat.2022.128120 ↗
69. Below the hall–petch limit in nanocrystalline ceramics10.1021/acsnano.7b07380 ↗
70. Contact of nominally flat surfaces
71. The extended Hertzian theory and its uses in analyzing indentation experiments10.1080/14786430600690507 ↗
72. The effect of contact conditions and material properties on elastic-plastic spherical contact10.2140/jomms.2006.1.865 ↗
73. Numerical investigation on the elastic–plastic transition of a cylindrical coating/substrate composite under normal compression10.1039/C7RA00146K ↗
74. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗