journal article·2024-11

Ultrahigh yield strength heterostructured titanium matrix composites by controlling the α /α′ precipitation sequence

Ke Zhu, Jin Huang, Wei Nie, Ruxia Liu, Yong Xiao, Jian Zhang, Guoqiang Luo, Qiang Shen

Publisher page

Abstract

Enhancing the strength and toughness of materials in a synergistic manner is a longstanding challenge. The content of β-stabilizing element W in Ti alloys is controlled using a chemical boundary engineering (CBE) strategy. Heterostructured Ti-xW composites are designed with α grain boundaries as the outer shell, α/β lamellar organization as the intermediate transition layer, and acicular martensite as the core region. This material exhibits a remarkable compressive yield strength of 2100 MPa, surpassing the majority of existing titanium matrix composites. The exceptional strength primarily arises from the precipitation strengthening of α/β lamellar organization and acicular martensite in the core region. This study holds significant implications for the development and design of high-strength heterostructured titanium matrix composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Dual enhancement in strength and ductility of Ti-V-Zr medium entropy alloy by fracture mode transformation via a heterogeneous structure10.1016/j.ijplas.2022.103505 ↗
2. Tension-compression asymmetry in yielding and strain hardening behavior of CP-Ti at room temperature10.1016/j.msea.2017.09.042 ↗
3. Towards high strengthening efficiency by in-situ planting nano-TiB networks into titanium matrix composites10.1016/j.compositesb.2022.110169 ↗
4. Microstructural and mechanical characterization of in-situ TiC/Ti titanium matrix composites fabricated by graphene/Ti sintering reaction10.1016/j.msea.2017.08.079 ↗
5. Effect of powder particle shape on the properties of in situ Ti–TiB composite materials produced by selective laser melting10.1016/j.jmst.2015.08.007 ↗
6. Microstructure regulation and strengthening mechanism of Al/Ag composites prepared by plasma activated sintered10.1016/j.msea.2022.143631 ↗
7. Homogeneous α-precipitation and enhanced plasticity in Ti–6Cr–5Mo–5V–4Al high-strength metastable titanium alloy with heterogenous β-structure10.1016/j.msea.2022.144180 ↗
8. Heterostructures enhance simultaneously strength and ductility of a commercial titanium alloy10.1016/j.actamat.2023.119182 ↗
9. Designing shell-layer-core architecture in Ti-based composites to achieve enhanced strength and plasticity10.1016/j.ijplas.2023.103723 ↗
10. Fabrication and mechanical properties of Ti2AlN/TiAl composite with continuous network structure10.1016/S1003-6326(23)66194-1 ↗
11. Superior strength-plasticity synergy in a heterogeneous lamellar Ti2AlC/TiAl composite with unique interfacial microstructure10.1016/j.jmst.2023.03.011 ↗
12. Microstructure and mechanical properties of core-shell B4C-reinforced Ti matrix composites10.3390/ma16031166 ↗
13. Evading the strength and ductility trade-off dilemma in titanium matrix composites through designing bimodal grains and micro-nano reinforcements10.1016/j.scriptamat.2023.115625 ↗
14. Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys10.1016/j.mattod.2020.09.029 ↗
15. Exceptional mechanical properties of aluminum matrix composites with heterogeneous structure induced by in-situ graphene nanosheet-Cu hybrids10.1016/j.compositesb.2022.109731 ↗
16. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
17. Microstructure evolution and deformation mechanism of α+β dual-phase Ti-xNb-yTa-2Zr alloys with high performance10.1016/j.jmst.2022.04.052 ↗
18. The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design – A review10.1016/j.pmatsci.2020.100672 ↗
19. Mechanical properties and deformation mechanism of tungsten/titanium hybrid foam10.1016/j.ijrmhm.2023.106224 ↗
20. Correlation between imposed deformation and transformation lattice strain on α variant selection in a metastable β-Ti alloy under isothermal compression10.1016/j.actamat.2018.09.022 ↗
21. Hot deformation behavior originated from dislocation activity and β to α phase transformation in a metastable β titanium alloy10.1016/j.ijplas.2019.03.011 ↗
22. Investigation on diffusion kinetics of Ti-X binary systems at 1300–1500 °C10.1016/j.jmrt.2023.06.054 ↗
23. Two kinds of α/β phase transformations and enhanced strengths of the bonded interface in laminated Ti alloys10.1016/j.msea.2023.144811 ↗
24. Description of stress–strain curves for stainless steel alloys10.1016/j.matdes.2015.08.001 ↗
25. Effect of strain rate on the mechanical properties of a tungsten particle reinforced titanium matrix composite10.1016/j.jmrt.2021.08.097 ↗
26. Unravelling the competitive effect of microstructural features on the fracture toughness and tensile properties of near beta titanium alloys10.1016/j.jmst.2021.04.032 ↗
27. In-situ reinforced Ti6Al4V-TiB2 titanium matrix composite fabricated by selective laser melting: Microstructure, mechanical properties and heat treatment10.1016/j.matchar.2024.113952 ↗
28. Influence of intermetallic phase (TiFe) on the microstructural evolution and mechanical properties of as-cast and quenched Ti–Mo–Fe alloys10.1038/s41598-024-60894-x ↗
29. Microstructure and mechanical properties of in-situ dual morphology Ti8C5/TiB2 reinforced TiAl composite10.1016/j.msea.2022.142918 ↗
30. Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti–Al–Nb–C system10.1016/j.matdes.2011.05.041 ↗
31. Microstructure and mechanical properties of in situ synthesized metastable β titanium alloy composite from low-cost elemental powders10.3390/ma16237438 ↗
32. Development of Ti-10Nb alloy by powder metallurgy processing route for dental application10.1002/jbm.b.35338 ↗
33. Controlling the sizes of in-situ TiC nanoparticles for high-performance TiC/Al–Cu nanocomposites10.1016/j.ceramint.2021.07.017 ↗
34. Microstructure evolution and mechanical properties of in-situ Ti6Al4V–TiB composites manufactured by selective laser melting10.1016/j.compositesb.2020.108567 ↗
35. Mechanical and tribological properties of Ti6Al4V alloy reinforced with Cu-coated multilayer graphene
36. Structural, mechanical and biocompatible evaluation of nanocrystalline Ti-Nb-Ta-Cr-Co0.2 HEA for implant applications
37. Effect of graphite powder addition on microstructure and room temperature mechanical properties of Ti-45Al-8Nb alloys10.3390/coatings14010021 ↗
38. Improving mechanisms of lamellar microstructure and mechanical properties by Y and in-situ Y2O3: modification of carbides particles and complete transformation of Ti2AlC particles10.1016/j.matchar.2023.113576 ↗
39. Mechanical properties of bulk metallic glasses and composites10.1557/jmr.2007.0050 ↗
40. Martensitic transformations in Ti-Mo alloys10.1007/BF00772735 ↗
41. Microstructure design and mechanical properties in a near-α Ti–4Mo alloy10.1016/j.actamat.2015.06.043 ↗
42. The interrelationship of fracture toughness and microstructure in a new near β titanium alloy Ti–7Mo–3Nb–3Cr–3Al10.1016/j.matchar.2014.07.018 ↗
43. Porter · 2021
44. Hierarchical nano-martensite-engineered a low-cost ultra-strong and ductile titanium alloy10.1038/s41467-022-33710-1 ↗
45. Martensite formation in titanium alloys: crystallographic and compositional effects10.1016/j.jallcom.2021.159636 ↗
46. Strong crystal size effect on deformation twinning10.1038/nature08692 ↗
47. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
48. A novel high-strength β-Ti alloy with hierarchical distribution of α-phase: the superior combination of strength and ductility10.1016/j.matdes.2019.107640 ↗
49. Tuning the scale of α precipitates in β-titanium alloys for achieving high strength10.1016/j.scriptamat.2018.05.040 ↗
50. A novel ultra-high strength titanium alloy via hierarchical α/α′ precipitation strengthening10.1016/j.msea.2022.142878 ↗
51. A low-cost hierarchical nanostructured beta-titanium alloy with high strength10.1038/ncomms11176 ↗