A Comparison Study on Detailed Strengthening mechanism analysis on micro structure and mechanical properties of 3 phases FGM Material with vibrational behavior analysis is fabricated using WAAM process and traditional method
Source abstract
Abstract
Additive Manufacturing (AM) techniques implement the surface thickness accumulating through the support of CAD/CAM model for improving the 3D (three dimensional) products. Metal Additive Manufacturing provides design versatility as well as the freedom in fabricating the materials. The preparation technology of the metal composites integrates pressure leaching, agitation casting, powder metallurgy and friction stirring. The strengthening mechanism of the metal composites comprises of ceramic particle, short fiber and whisker etc. The two common strengthening mechanism to attain the high performing material composite are ceramic particulate reinforced composites (CPRCs) and precipitation hardening (PH). Thus, the current study evaluates the strengthening mechanism of fabricated material along with vibrational behavior using Wire Arc Additive Manufacturing (WAAM). The study fabricated three functionally graded material. The FGM materials are SS316L, SS316L+Inconel 625 + Ti6Al4V and SS316L+Inconel 625 + Inconel 718. The three phase FGM material is annealed at 700⁰C, 900⁰C and 1200⁰C for 60 min. Later, it have been air-cooled to the room temperature. The heating process strengthens the three phase FGM materials. The heating process of FGM material results in the precipitation which might not improve the mechanical properties. Nonetheless, the varied annealing temperature such as 900⁰C and 1200⁰C has enhanced the mechanical properties of the three phase FGM materials. As per the analysis, 60 % SS316L+20 % INCONEL 625+20 % Ti6Al4V material has been completely broken whereas 60 % SS316L+20 % INCONEL 625+20 % Inconel 718 has slight crack which show the increased strength of the material. The resonance frequency in conventional part is lower than the AM part. The resonance is oscillated with greater amplitude at certain frequencies. In damping, a higher resonance frequency is less vibrated in common frequencies. Thus, the study concludes that 60 % SS316L+20 % INCONEL 625+20 % Ti6Al4V and 60 % SS316L+20 % INCONEL 625+20 % Inconel 718 has significant strength compared to parent material SS316L. Moreover, AM has better vibration behavior compared to the conventional manufacturing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The influence of CNTs on the microstructure and strength of Al-CNT composites produced by flake powder metallurgy and hot pressing method10.1016/j.diamond.2018.06.021 ↗
2. Free vibration analysis of FGM cylindrical shells surrounded by Pasternak elastic foundation in thermal environment considering fluid-structure interaction10.1016/j.apm.2019.10.023 ↗
3. Synergistic strengthening mechanisms of copper matrix composites with TiO2 nanoparticles10.1016/j.msea.2019.138797 ↗
4. Strengthening mechanisms in carbon nanotubes reinforced metal matrix composites: A review10.3390/met11101613 ↗
5. Development and characterization of 316L/Inconel625 functionally graded material fabricated by laser direct metal deposition10.1016/j.optlastec.2019.105916 ↗
6. Phase transformation and strengthening mechanisms of nanostructured high-entropy alloys10.1515/ntrev-2021-0071 ↗
7. Strengthening mechanisms in selective laser melted 316L stainless steel10.1016/j.msea.2021.142434 ↗
8. Resonance track-and-dwell testing for crack length measurement on 304L stainless steel.10.1051/meca/2020089 ↗
9. Printability and microstructure of directed energy deposited SS316l-IN718 multi-material: numerical modeling and experimental analysis10.1038/s41598-022-21077-8 ↗
10. Influence of microstructural characteristics on the mechanical and wear behavior of wire arc additive manufactured and cast eutectic Al-Si alloy
11. Influence of heat treatment on stainless steel 316L alloy manufactured by hybrid additive manufacturing using powder bed fusion and directed energy deposition10.1007/s12540-022-01225-5 ↗
12. Enhanced mechanical properties and corrosion resistance of 316L stainless steel by pre-forming a gradient nanostructured surface layer and annealing10.1016/j.actamat.2021.116773 ↗
13. Microstructure, mechanical properties and strengthening mechanisms of IN738LC alloy produced by electron beam selective melting
14. Study on vibration and surface roughness in MQCL turning of stainless steel10.1016/j.jmapro.2021.03.041 ↗
15. A refined quasi-3D shear deformation theory for thermo-mechanical behavior of functionally graded sandwich plates on elastic foundations10.1177/1099636217727577 ↗
16. Experimental and response surface study on additive manufacturing of functionally graded steel-inconel wall using direct laser metal deposition10.1016/j.optlastec.2023.109707 ↗
17. Experimental study of SS316L, Inconel 625, and SS316L-IN625 functionally graded material produced by direct laser metal deposition process10.1177/09544062241237408 ↗
18. Towards high strength cast Mg-RE based alloys: phase diagrams and strengthening mechanisms10.1016/j.jma.2022.03.008 ↗
19. A review on the effect of mechanical and thermal treatment techniques on shape memory alloys
20. Revealing relationships between porosity, microstructure and mechanical properties of laser powder bed fusion 316L stainless steel through heat treatment10.1016/j.matdes.2020.108481 ↗
21. A novel quasi-3D hyperbolic theory for free vibration of FG plates with porosities resting on Winkler/Pasternak/Kerr foundation10.1016/j.ast.2017.11.004 ↗
22. Microstructural evolution, hardness, and strengthening mechanisms in SLM AlSi10Mg alloy subjected to equal-channel angular pressing (ECAP)10.3390/ma14247598 ↗
23. Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting10.1038/s41427-018-0018-5 ↗
24. Big data driven supply chain design and applications for blockchain: an action research using case study approach10.1016/j.omega.2021.102452 ↗
25. Strengthening mechanisms and strain hardening behavior of 316L stainless steel manufactured by laser-based powder bed fusion10.1002/adem.202201230 ↗
26. The role of the solidification structure on orientation-dependent hardness in stainless steel 316L produced by laser powder bed fusion10.1016/j.msea.2021.142493 ↗
27. Vibration analysis of FGM plates in thermal environment resting on elastic foundation using ES-MITC3 element and prediction of ANN10.1016/j.csite.2021.100852 ↗
28. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion10.1016/j.actamat.2020.11.018 ↗
29. Microstructure analysis, tribological correlation properties and strengthening mechanism of graphene reinforced aluminum matrix composites10.1038/s41598-022-13793-y ↗
30. Hetero-deformation induced (HDI) strengthening in directed energy deposited SS316L: a nanoindentation-based investigation10.1016/j.msea.2022.144280 ↗
31. The microstructure evolution and tensile properties of medium-Mn steel heat-treated by a two-step annealing process10.1016/j.jmst.2020.10.032 ↗
32. Deep learning-based downlink channel prediction for FDD massive MIMO system10.1109/LCOMM.2019.2934851 ↗
33. Relationship between nonlinear free vibration behavior and nonlinear forced vibration behavior of viscoelastic plates10.1016/j.cnsns.2022.106926 ↗