Remove of fluoride using covalent organic framework supported aluminium oxide: An experimental and computational mechanism
Source abstract
Abstract
Fluoride pollution is a problem of increasing concern to global public health, and it is important to reduce the concentration of fluoride ions in water. In this paper, the composite adsorbent (Al 2O 3-COF) of Al 2O 3 and melamine polymer network (MPN) was prepared by the solvothermal method, and the physicochemical properties of the material were characterized. The characterizations showed that Al 2O 3 -COF had a porous and loosely packed morphology, and the adsorption behavior conformed to the pseudo-first-order kinetic and the Langmuir isotherm model. This study showed that Al 2O 3-COF exerted the synergistic effect of Al 2O 3 and COFs to adsorb fluoride, with an adsorption capacity superior to that of a single alumina at 66.2 mg/g. The adsorption performance test showed that the interfering anions (PO 4 3-, Cl -, Br -, NO 3 -, SO 4 2-) had little effect on the adsorption performance of Al 2O 3-COF while maintaining a fluoride removal rate of over 83 %. After 5 cycles of recycling, more than 75 % of fluoride ions could also be removed. In addition, insights into the adsorption mechanism of Al 2O 3 -COF, mainly through ion exchange and chemisorption, were calculated by density functional theory. This experiment is to apply COFs in the field of F - adsorption, which can provide ideas and guidance for future research.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fluoride Effects and Removal · Groundwater and Isotope Geochemistry · Esophageal and GI Pathology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. A review of water pollution arising from agriculture and mining activities in Central Asia: facts, causes and effects10.1016/j.envpol.2021.118209 ↗
2. Adsorption of fluoride to UiO-66-NH2 in water: stability, kinetic, isotherm and thermodynamic studies10.1016/j.jcis.2015.08.061 ↗
3. New easily recycled carrier based polyurethane foam by loading Al-MOF and biochar for selective removal of fluoride ion from aqueous solutions10.1016/j.scitotenv.2023.166312 ↗
4. Efficient fluoride removal from aqueous solution by synthetic Fe Mg La tri-metal nanocomposite and the analysis of its adsorption mechanism10.1016/j.jallcom.2017.12.142 ↗
5. GO-CeO₂ nanohybrid for ultra-rapid fluoride removal from drinking water10.1016/j.scitotenv.2021.148547 ↗
6. Source apportionment of fluorine pollution in regional shallow groundwater at You’xi County southeast China10.1016/j.chemosphere.2016.05.057 ↗
7. Indoor air quality and health: empirical evidence from fluoride pollution in China10.1016/j.chieco.2019.03.001 ↗
8. Aluminium fumarate metal-organic framework: a super adsorbent for fluoride from water10.1016/j.jhazmat.2015.10.030 ↗
9. All in one porous material: exceptional sorption and selective sensing of hexavalent chromium by using a Zr4+ MOF10.1039/C7TA04496H ↗
10. Deep removal of fluoride from tungsten smelting wastewater by combined chemical coagulation-electrocoagulation treatment: from laboratory test to pilot test10.1016/j.jclepro.2023.137914 ↗
11. Synthesis of amino-functionalized MIL-101(Cr) MOF for hexavalent chromium adsorption from aqueous solutions
12. Investigation on structural and photocatalytic properties of complex perovskites Sr4Sr2B′2O11 (B′ = Ta, Nb)10.1088/2053-1591/ab2f29 ↗
13. Preparation and application of magnesium oxide nanoparticles for superiorly fluoride removal10.1016/j.jallcom.2023.170935 ↗
14. Perovskite lanthanum aluminate nanoparticles applications in antimicrobial activity, adsorptive removal of Direct Blue 53 dye and fluoride10.1016/j.msec.2019.04.013 ↗
15. Adsorption mechanism for removing different species of fluoride by designing of core-shell boehmite10.1016/j.jhazmat.2020.122555 ↗
16. Removal of fluoride from industrial wastewater by using different adsorbents: a review10.1016/j.scitotenv.2021.145535 ↗
17. The model and mechanism of adsorptive technologies for wastewater containing fluoride: a review10.1016/j.chemosphere.2023.139808 ↗
18. Highly efficient fluoride removal from water using 2D metal-organic frameworks MIL-53(Al) with rich Al and O adsorptive centers10.1016/j.ese.2021.100123 ↗
19. Groundwater fluoride removal by novel activated carbon/aluminium oxide composite derived from raffia palm shells: Optimization of batch operations and field-scale point of use system evaluation10.1016/j.rineng.2022.100407 ↗
20. Solvent-free hydrothermal synthesis of gamma-aluminum oxide nanoparticles with selective adsorption of Congo red10.1016/j.jcis.2018.10.054 ↗
21. Fabricating MOF@COF core-shell catalyst with remarkable CO2 adsorption capacity and charge carrier dynamic for efficient CO2 conversion10.1016/j.jallcom.2023.171919 ↗
22. NaCl template-assisted synthesis of self-floating COFs foams for the efficient removal of sulfamerazine10.1016/j.jhazmat.2021.126702 ↗
23. Facile synthesis of Fe3O4@COF covalent organic frameworks for the adsorption of bisphenols from aqueous solution10.1016/j.molliq.2020.114456 ↗
24. Structural modification of aluminum oxides for removing fluoride in water: crystal forms and metal ion doping10.1080/09593330.2021.1921044 ↗
25. One-pot synthesis and assembly of melamine-based nanoparticles for microporous polymer organic frameworks and their application as a support for a silver nanoparticle catalyst10.1039/C5RA10602H ↗
26. Facile synthesis of melamine-based porous polymer networks and their application for removal of aqueous mercury ions10.1016/j.polymer.2010.10.052 ↗
27. A short review on stable metal nanoparticles using ionic liquids, supported ionic liquids, and poly(ionic liquids)10.1007/s11051-016-3409-y ↗
28. The defluoridation of water by acidic alumina10.1016/j.cherd.2012.05.002 ↗
29. Phosphotungstic acid-supported melamine–terephthalaldehyde covalent organic framework as a novel and reusable nanostructured catalyst in three-component synthesis of 2H-indazolo[2,1-b]phthalazine-trione derivatives10.1007/s11164-022-04776-9 ↗
30. Cost-effective removal of Cr(VI) ions from aqueous media using L-cysteine functionalized gold nanoparticles embedded in melamine-based covalent organic framework (Cys-AuNPs@COF)
31. Enhanced surface hydroxyl groups by using hydrogen peroxide on hollow tubular alumina for removing fluoride10.1016/j.micromeso.2020.110051 ↗
32. A highly porous fiber coating based on a Zn-MOF/COF hybrid material for solid-phase microextraction of PAHs in soil10.1016/j.talanta.2023.125236 ↗
33. Calcium and zirconium modified acid activated alumina for adsorptive removal of fluoride: performance evaluation, kinetics, isotherm, characterization and industrial wastewater treatment - ScienceDirect10.1016/j.apt.2020.02.035 ↗
34. Amidoxime-functionalized hollow 2D-COFs for uranium separation10.1016/j.seppur.2023.125620 ↗
35. Defluoridation from aqueous solutions by nano-alumina: characterization and sorption studies10.1016/j.jhazmat.2010.11.102 ↗
36. Synthesis and characterization of Mg–Fe–La trimetal composite as an adsorbent for fluoride removal10.1016/j.cej.2014.11.130 ↗
37. Removal of fluoride ions from ZnSO4 electrolyte by amorphous porous Al2O3 microfiber clusters: adsorption performance and mechanism10.1016/j.hydromet.2020.105455 ↗
38. Magnetic Al2O3/ZrO2/Fe3O4 nanocomposite: synthesis, characterization, and application for the adsorptive removal of nitrate from aqueous solution10.1016/j.gsd.2022.100873 ↗
39. Pollution control by waste: dual metal sludges derived Ni-Al LDOs for efficient fluoride removal10.1016/j.jiec.2023.10.033 ↗
40. Synthesis of alumina-based cross-linked chitosan–HPMC biocomposite film: an efficient and user-friendly adsorbent for multipurpose water purification10.1039/C9NJ03945G ↗
41. Enhanced fluoride removal from water by rare earth (La and Ce) modified alumina: adsorption isotherms, kinetics, thermodynamics and mechanism10.1016/j.scitotenv.2019.06.175 ↗
42. Investigation on corrosion inhibition and adsorption mechanism of triazine-thiourea derivatives at mild steel / HCl solution interface: electrochemical, XPS, DFT and Monte Carlo simulation approach10.1016/j.jelechem.2020.114599 ↗
43. Experimental and modeling studies for adsorbing different species of fluoride using lanthanum-aluminum perovskite10.1016/j.chemosphere.2020.128089 ↗
44. Fluoride removal on Fe–Al-impregnated granular ceramic adsorbent from aqueous solution10.1007/s10098-013-0659-6 ↗
45. Adsorption of fluoride in aqueous solutions using KMnO4-modified activated carbon derived from steam pyrolysis of rice straw10.1016/j.jhazmat.2007.01.062 ↗
46. Natural Banana (Musa acuminate) Peel: an unconventional adsorbent for removal of fluoride from aqueous solution through batch study10.1007/s41101-016-0015-x ↗
47. A novel acid modified alumina adsorbent with enhanced defluoridation property: kinetics, isotherm study and applicability on industrial wastewater10.1016/j.jhazmat.2018.11.064 ↗
48. Research progresses on the application of perovskite in adsorption and photocatalytic removal of water pollutants10.1016/j.jhazmat.2022.130024 ↗
49. Molecular structure, vibrational spectroscopic (FT-IR, FT-Raman), NBO, HOMO and LUMO analysis of morpholinium oxalate by density functional method10.1016/j.molstruc.2018.06.109 ↗