journal article·2024-08

Effect of pre-induced precipitations on microstructure evolution and the mechanical properties of pre-twinned ZK61 Mg alloys at elevated temperatures

Yunli Bai, Lifei Wang, Dabiao Xia, Qiuyan Huang, Liwei Lu, Kunkun Deng, Hongxia Wang, Liuwei Zheng, Kwang Seon Shin

Publisher page

Abstract

To examine the effects of pre-induced precipitations on microstructure evolution and mechanical properties of pre-twinned ZK61 Mg alloy at elevated temperatures, the commercially rolled ZK61 Mg alloy sheets (AR samples) were pre-twinned and {10−12} tensile twins were added (PT samples). Some samples were aged, precipitated phases were introduced (PTA samples), and subsequently uniaxial tensile strain was applied. The results reveal that at elevated temperatures, the interactions of detwinning, dynamic recrystallization (DRX), and precipitation have a distinctive impact on the microstructure evolution. At room temperature (RT) and 100 ℃, strain is dominated by detwinning, while the precipitation phase impedes the detwinning behaviors. DRX influences the evolution of the microstructure at 150 ℃, 200 ℃, and 250 ℃. The presence of precipitated phases promotes recrystallization nucleation. Continuous DRX (CDRX), detwinning, and precipitated phase deformation are coordinated at 150 ℃. DRX in aged samples has a limited effect, while detwinning plays a dominant role. The ultimate tensile strength (UTS) value increment of PTA sample relative to PT sample reaches 31.8 MPa. The deformation is generated by the discontinuous DRX (DDRX) at 250 ℃, and the precipitation and DDRX have a higher impediment on detwinning, resulting in more twins restraining in the PTA sample. The UTS value of PTA sample only increases by 7.7 MPa compared with PT sample.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Microstructural evolution and grain growth mechanism of pre-twinned magnesium alloy during annealing10.1016/j.jma.2020.11.015 ↗
2. Role of second phases and grain boundaries on dynamic recrystallization behavior in ZK60 magnesium alloy10.1016/j.jallcom.2020.157958 ↗
3. The texture and its optimization in magnesium alloy10.1016/j.jmst.2019.10.010 ↗
4. Development and prospects of degradable magnesium alloys for structural and functional applications in the fields of environment and energy10.1016/j.jma.2023.09.013 ↗
5. Recent advances of electromagnetic interference shielding Mg matrix materials and their processings: A review10.1016/S1003-6326(22)65881-3 ↗
6. Research advances of magnesium and magnesium alloys worldwide in 202210.1016/j.jma.2023.07.011 ↗
7. Applications of magnesium alloys for aerospace: A review10.1016/j.jma.2023.09.015 ↗
8. Research advances of magnesium and magnesium alloys worldwide in 202110.1016/j.jma.2022.04.001 ↗
9. A simultaneous improvement of both strength and ductility by Sn addition in as-extruded Mg-6Al-4Zn alloy10.1016/j.jmst.2019.04.048 ↗
10. Effect of extrusion ratio and temperature on microstructures and tensile properties of extruded Mg-Gd-Y-Mn-Sc alloy10.1016/j.msea.2020.140330 ↗
11. Comparison of the effects of isothermal equal channel angular pressing and multi-directional forging on mechanical properties of AM60 magnesium alloy10.1016/j.msea.2020.139002 ↗
12. Recent advances using equal-channel angular pressing to improve the properties of biodegradable Mg-Zn alloys10.1016/j.jma.2023.07.009 ↗
13. Achieving superb strength in single-phase FCC alloys via maximizing volume misfit10.1016/j.mattod.2023.02.012 ↗
14. Twin-solute, twin-dislocation and twin-twin interactions in magnesium10.1016/j.jma.2023.07.015 ↗
15. Enhanced stretch formability of AZ31 magnesium alloy sheet by secondary regulation of initial twin orientation10.1016/j.matlet.2022.133083 ↗
16. Accurate determination of active slip systems for improved geometrical criteria of basal-to-basal slip transfer at grain boundaries in pure Mg10.1016/j.actamat.2022.118536 ↗
17. Effects of pretwins on texture and microstructural evolutions of AZ31 magnesium alloy during high temperature deformation10.1016/j.jallcom.2021.162412 ↗
18. Towards enhancing the ductility of AZ31 Mg alloys by controlling twin orientation at various shear strain levels10.1016/j.msea.2023.145151 ↗
19. Unveiling the planar deformation mechanisms for improved formability in pre-twinned AZ31 Mg alloy sheet at warm temperature10.1016/j.jallcom.2022.165495 ↗
20. Simultaneous enhancement of strength and ductility for AZ31 magnesium alloy by pre-twinning induced heterostructure10.1016/j.ijplas.2022.103483 ↗
21. Transmission electron microscopy study of age hardening in a Mg-5 wt% Zn alloy10.1016/0001-6160(65)90039-8 ↗
22. Effects of the β1′ precipitates on mechanical and damping properties of ZK60 magnesium alloy10.1016/j.msea.2020.140730 ↗
23. Effect of pre-deformation on microstructure and mechanical properties of WE43 magnesium alloy10.1016/j.msea.2017.02.082 ↗
24. Acceleration of aging behavior and improvement of mechanical properties of extruded AZ80 alloy through (10–12) twinning10.1016/j.jma.2021.09.008 ↗
25. Enhancing the age-hardening response of rolled AZ80 alloy by pre-twinning deformation10.1016/j.msea.2016.10.094 ↗
26. Improving the mechanical properties of extruded Mg–3Al–1Zn alloy by cold pre-forging10.1016/j.scriptamat.2013.04.011 ↗
27. Twin-twin interactions and contraction twin formation in an extruded magnesium alloy subjected to an alteration of compressive direction10.1016/j.jallcom.2017.12.043 ↗
28. Detwinning behavior of Mg–3Al–1Zn alloy at elevated temperatures10.1016/j.msea.2014.08.034 ↗
29. Quasi in-situ EBSD analysis of twinning-detwinning and slip behaviors in textured AZ31 magnesium alloy subjected to compressive-tensile loading10.1016/j.jma.2021.08.025 ↗
30. Microstructure evolution maps of AZ31 and AZ91–Ca–Y–MM alloys under precompression and subsequent annealing conditions10.1016/j.msea.2022.143814 ↗
31. Effect of twin boundary-dislocation and twin boundary-solute atom interaction on detwinning of Mg-2Gd-2Y-0.3Zr alloy10.1016/j.jallcom.2018.08.171 ↗
32. A review of Mg alloys containing long-period stacking ordered (LPSO) structures with insight into the application of friction stir processing10.1016/j.jmrt.2023.04.105 ↗
33. Modification of texture and microstructure of magnesium alloy extrusions by particle-stimulated recrystallization10.1016/j.msea.2012.09.102 ↗
34. Strengthening effect of prefabrication (10–12) tensile twinning on AZ80+0.4%Ce magnesium alloy and inhibition mechanism of discontinuous precipitation10.1016/j.jma.2022.09.013 ↗
35. Investigation of microstructure and mechanical properties of ZK60 magnesium alloy achieved by extrusion-shearing process10.1016/j.jmrt.2023.05.256 ↗
36. Polycrystal modeling of tensile twinning in a Mg alloy during cyclic loading10.1016/j.scriptamat.2012.07.008 ↗
37. VPSC-TDT modeling and texture characterization of the deformation of a Mg-3Al-1Zn plate10.1016/j.jallcom.2017.03.243 ↗
38. Characteristics of cross grain boundary contraction twin pairs and bands in a deformed Mg alloy10.1016/j.jallcom.2016.09.024 ↗
39. Investigation of deformation twinning under complex stress states in a rolled magnesium alloy10.1016/j.jallcom.2016.05.144 ↗
40. Characterization of dynamic precipitation behaviors accompanying dynamic recrystallization in an Mg-Al-Zn-RE alloy10.1016/j.jallcom.2022.163745 ↗
41. Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion10.1016/j.actamat.2018.07.014 ↗
42. Effect of deformation modes on continuous dynamic recrystallization of extruded AZ31 Mg alloy10.1016/j.jallcom.2021.163086 ↗
43. Effect of twinning on flow stress during initial stage of hot compression of twin roll cast Mg-5.51Zn-0.49Zr alloy10.1007/s11771-010-0030-6 ↗
44. The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy10.1016/j.actamat.2006.09.010 ↗
45. Revealing the tensile anisotropy, tension–compression asymmetry, and strain-hardening behavior of a high-performance Mg–Gd–Ag alloy10.1016/j.jallcom.2021.159238 ↗
46. Enhanced mechanical properties of a hot-extruded AZ80 Mg alloy rod by pre-treatments and post-hot compression10.1016/j.jallcom.2017.12.296 ↗
47. Dynamic precipitation and enhanced mechanical properties of ZK60 magnesium alloy achieved by low temperature extrusion10.1016/j.msea.2021.142143 ↗
48. Plastic deformation behavior of ZK60 magnesium alloy with addition of neodymium10.1007/s11771-008-0081-0 ↗
49. The double-edge effect of second-phase particles on the recrystallization behaviour and associated mechanical properties of metallic materials10.1016/j.pmatsci.2017.10.004 ↗
50. Chen · J. Alloy. Compd. · 2016 · 680 · 19110.1016/j.jallcom.2016.04.106 ↗
51. Impact of solute elements on detwinning in magnesium and its alloys10.1016/j.ijplas.2016.09.014 ↗
52. Portevin-Le Chatelier effect, twinning-detwinning and disordering in an aged Ni–Cr–Mo alloy during large plastic deformation10.1016/j.msea.2020.140506 ↗
53. Effect of initial microstructure on the dynamic recrystallization behavior of Mg–Gd–Y–Zr alloy10.1016/j.msea.2012.07.021 ↗
54. Effect of Sm on dynamic recrystallization of Mg-8Gd-0.5Zr alloy during hot compression10.1016/j.jallcom.2021.158648 ↗
55. Continuous observation of twinning and dynamic recrystallization in ZM21 magnesium alloy tubes during locally heated dieless drawing10.1016/j.jma.2021.06.001 ↗
56. A strategy to regulate the microstructure and properties of Mg-2.0Zn-1.5Mn magnesium alloy by tracing the existence of Mn element10.1016/j.jallcom.2021.161789 ↗
57. Optimum parameters and kinetic analysis for hot working of a homogenized Mg–8Sn–1Al–1Zn alloy10.1016/j.matdes.2015.07.047 ↗
58. Dynamic Recrystallization and its Effect on Microstructure and Texture Evolution in Magnesium Alloys☆
59. Transition of dynamic recrystallization mechanisms of as-cast AZ31 Mg alloys during hot compression10.1016/j.ijplas.2018.07.017 ↗
60. Particle effects on recrystallization in magnesium–manganese alloys: Particle pinning10.1016/j.msea.2011.02.030 ↗
61. Particle effects on recrystallization in magnesium–manganese alloys: Particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
62. Interaction of dynamic precipitation and dynamic recrystallization of a Mg-4Sn-3Al-1Zn alloy during hot compression
63. Deformation mechanism of ZK60 magnesium bars during radial forging: Mathematical modeling and experimental investigation10.1016/j.matchar.2021.111321 ↗
64. Effect of deformation mode on double-peak texture evolution in pre-twinning Mg-3Al-1Zn alloy during high-speed impacting loading10.1016/j.jallcom.2023.172122 ↗
65. A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys10.1016/0956-7151(93)90130-K ↗
66. Effects of temperature and strain rate on the tension-compression asymmetric plastic deformation behavior of ME20M magnesium alloy: Experiments and modeling10.1016/j.rinp.2021.104406 ↗
67. Effect of particles on the formation of deformation twins in a magnesium-based alloy10.1016/j.msea.2009.04.001 ↗
68. Compressive stress and shear stress on the deformation mechanism of Mg-13Gd-4Y–2Zn-0.5Zr alloy at different deformation temperatures10.1016/j.jmrt.2022.03.052 ↗
69. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗