The effect of multiple factors on the synthesis of mullite whiskers based on the S-L-S mechanism and the comparison of strengthening performance
Source abstract
Abstract
s Mullite whiskers were synthesized based on the S-L-S growth mechanism at high temperatures using nano-alumina sol and nano-silica sol as the main materials and ammonium molybdate tetrahydrate as an additive. The effects of the silica-aluminum ratio, addition of ammonium molybdate catalyst, sintering temperature , and sintering time on the generation of mullite whiskers were systematically investigated to determine the optimal synthesis conditions. It was shown that the best raw material formulation was (3Al 2 O 3 ·2.2SiO 2 ) 8 (MoO 3 ) 2 , which minimized the mass loss of precursor powder at 0–1200°C, with only 23.62%. The mullite whiskers generated by sintering for 1–3 h maintained good microforms without agglomeration. The optimal growth conditions were 1300°C sintering for 1 h. The resulting mullite whiskers grew along the [240] direction and had the largest aspect ratios up to 10.2–14.3. The highest generation rate was up to 94.5 wt% with a grain size of 81.6 nm. The BET surface area was 2.308 m 2 /g and the pore size was 5.44 nm. The mass loss at 0–1200°C was the least, only 1.32%, with good thermal stability . In addition, the effects of (xAl 2 O 3 ·ySiO 2 ) 8 (MoO 3 ) 2 (x:y=3:1.8, 3:2, 3:2.2) whiskers treated at 1300°C on the APSB adhesive and MSABS adhesive bonding were investigated in this paper, it was clear that whiskers with x:y=3:2.2 had the best enhancement effect. For APSB adhesive strength could be increased by up to 55% and the fracture displacement by 2.42 times. For MSABS adhesives, the strength could be increased by up to 47% and the fracture displacement by 1.49 times.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Improvement in dielectric properties and energy storage performance of barium strontium niobate glass ceramics by Sm2O3 addition10.1016/j.jallcom.2023.171579 ↗
2. Microstructural, mechanical and thermal characterisation of sol–gel-derived aluminium titanate–mullite ceramic composites10.1016/j.actamat.2006.02.032 ↗
3. Optically transparent polycrystalline Al2O3 produced by spark plasma sintering10.1111/j.1551-2916.2007.02086.x ↗
4. Structure and properties of mullite—A review10.1016/j.jeurceramsoc.2007.03.017 ↗
5. Shaping quality, microstructure, and mechanical properties of melt-grown mullite ceramics by directed laser deposition10.1016/j.jallcom.2021.159609 ↗
6. Mechanisms of toughening and strengthening in ceramic-based nanocomposites10.1016/S0167-6636(02)00129-1 ↗
7. The martensitic transformation in ceramics—its role in transformation toughening10.1016/S0079-6425(00)00005-0 ↗
8. The rising of flexible and elastic ceramic fiber materials: fundamental concept, design principle, and toughening mechanism10.1002/adfm.202207130 ↗
9. Toughening behavior in whisker-reinforced ceramic matrix composites10.1111/j.1151-2916.1988.tb05791.x ↗
10. Tailoring Li2Si2O5 rod-like particles and their simultaneously strengthening and toughening effects on lithium disilicate glass-ceramics10.1016/j.jnoncrysol.2022.121794 ↗
11. Strengthening and toughening mechanisms of ceramic nanocomposites10.1111/j.1151-2916.1998.tb02503.x ↗
12. Transformation toughening in ZrO2-containing ceramics10.1111/j.1151-2916.1987.tb04865.x ↗
13. Toughening of ceramics by short aligned fibers10.1016/0167-6636(95)00007-0 ↗
14. Preparation and applications of calcium carbonate whisker with a special focus on construction materials10.1016/j.conbuildmat.2019.117613 ↗
15. Whisker toughening of ceramics: toughening mechanisms, fabrication, and composite properties10.1146/annurev.ms.24.080194.000503 ↗
16. Molten salt synthesis of mullite whiskers from various alumina precursors10.1016/j.jallcom.2009.10.220 ↗
17. Synthesis of mullite whiskers and their application in composites10.1111/j.1151-2916.1991.tb06778.x ↗
18. Mullite whiskers derived from coal fly ash10.1016/j.msea.2006.11.114 ↗
19. A review of advanced mullite ceramics
20. A facile construction of NiV2O6/CeO2 nano-heterojunction for photo-operated process in water remediation reaction, antibacterial studies, and detection of D-Amino acid in peroxidase system
21. Decoration of MoO3-x on clay mineral matrix with great phosphorescence properties for oxygen activation, photochemical properties, bactericidal and oxidase-like mimics for prompt detection of pesticide10.1016/j.mssp.2023.107847 ↗
22. Defect evolution on the activity of samarium doped Na2TinO2n+1 with different sodium/titanium ratio for photocatalytic degradation of fluoroquinolones drugs, toxicity assessments and eco-toxicity prediction10.1016/j.ceramint.2024.01.097 ↗
23. A novel fabricate of iron and nickel-introduced bimetallic MOFs for quickly catalytic degradation via the peroxymonosulfate, antibacterial efficiency, and cytotoxicity assay10.1016/j.inoche.2023.110823 ↗
24. Laser additive manufacturing of Zn-2Al part for bone repair: Formability, microstructure and properties10.1016/j.jallcom.2019.05.278 ↗
25. High anti-ablative epoxy resin-based flame retardant and thermal insulation coating based on spontaneous Ceramization and vitrification10.1016/j.ceramint.2024.04.154 ↗
26. Optical detection of fat and adulterants concentration milk using TMDC (WS2 and MoS2)-surface plasmon resonance sensor via high sensitivity and detection accuracy
27. Advances in technical assessment of spiral inertial microfluidic devices toward bioparticle separation and profiling: a critical review10.1007/s13206-023-00131-1 ↗
28. The preparation and performance analysis of zirconium-modified aluminum phosphate-based high-temperature (RT–1500°C) resistant adhesive for joining alumina in extreme environment
29. Preparation and performance analysis of methyl-silicone resin-modified epoxy resin-based intumescent flame retardant thermal insulation coating10.1142/S2424913023410011 ↗
30. Dual-phase La0.5Sr0.5Fe0.8Co0.2O3-δ-Ce0.8Sm0.2O2-δ hollow fiber membranes for oxygen separation10.1016/j.jallcom.2023.172838 ↗
31. A comprehensive parametric study on CO2 removal from natural gas by hollow fiber membrane contactor: a computational fluid dynamics approach10.1002/ceat.202300504 ↗
32. Periodic instability in whisker growth10.1016/0022-0248(73)90008-0 ↗
33. Controlled growth of oriented amorphous silicon nanowires via a solid–liquid–solid (SLS) mechanism10.1016/S1386-9477(00)00202-2 ↗
34. In-situ growth of mullite whiskers and their effect on the microstructure and properties of porous mullite ceramics with an open/closed pore structure10.1016/j.jeurceramsoc.2021.09.045 ↗
35. Preparation of mullite whiskers from topaz decomposition10.1016/j.matlet.2003.09.046 ↗
36. Effects of in situ synthesized mullite whiskers on compressive strength of mullite fiber brick10.1016/j.ceramint.2016.05.107 ↗
37. The formation mechanism of mullite whisker in the mullite fiber network10.2109/jcersj2.18027 ↗
38. Tailoring the microstructure of mechanoactivated Al2O3 and SiO2 mixtures with TiO2 addition10.1016/j.jallcom.2010.07.069 ↗
39. Low-temperature in-situ grown mullite whiskers toughened heat-resistant inorganic adhesive10.1016/j.jallcom.2020.155349 ↗
40. Synthesis of porous ceramic with well-developed mullite whiskers in system of Al2O3-Kaolin-MoO310.1016/j.jmrt.2021.09.002 ↗
41. Growth of mullite whiskers in mechanochemically activated oxides doped with WO310.1016/S0955-2219(03)00083-9 ↗
42. Joining of various engineering ceramics and composites by a modified preceramic polymer for high-temperature application10.1016/j.jeurceramsoc.2015.07.036 ↗
43. An engineering ceramic-used high-temperature-resistant inorganic phosphate-based adhesive self-reinforced by in-situ growth of mullite whiskers10.1016/j.jeurceramsoc.2018.12.040 ↗
44. Kinetic study on the anisotropic grain growth of elongated iron-containing mullite10.1016/j.ceramint.2019.03.220 ↗
45. Fabrication and catalytic growth mechanism of mullite ceramic whiskers using molybdenum oxide as catalyst10.1016/j.ceramint.2016.11.035 ↗
46. Easy and green synthesis of TiO2 (Anatase and Rutile): Estimation of crystallite size using Scherrer equation, Williamson-Hall plot, Monshi-Scherrer Model, size-strain plot, Halder-Wagner Model
47. Molten salt synthesis of mullite whiskers on the surface of SiC ceramics10.1016/j.jallcom.2013.07.203 ↗
48. The effect of phosphorus on the formation of mullite whiskers from citric acid activated kaolin10.1016/j.ceramint.2018.07.112 ↗
49. Mechanical, dielectric and photoluminescence properties of alumina–mullite composite derived from natural Ganges clay10.1016/j.clay.2015.06.021 ↗
50. XPS/TEM characterisation of Pt Au/C cathode electrocatalysts prepared by metal vapour synthesis10.1002/sia.3269 ↗
51. Plasma-modified polymer surfaces: Characterization using XPS10.1016/j.elspec.2009.12.003 ↗
52. Comments on the theory of complex XPS spectra: extracting chemical information from the Fe 3p XPS of Fe oxides10.1080/02603594.2021.1938007 ↗
53. Study of oxygen vacancies′ influence on the lattice parameter in ZnO thin film10.1016/j.matlet.2012.06.107 ↗
54. FT-IR emission spectroscopic studies of the thermal decomposition of ammonium molybdate, vanadate, and tungstate10.1366/0003702934048604 ↗