CALPHAD-guided design and experimental study on a novel Al-Ti-Nb alloy
Source abstract
Abstract
We have used a CALPHAD-guided design methodology to develop a novel lightweight Al-Ti-Nb alloy with nearly 50 vol% of in-situ formed trialuminide reinforcement. After compositional optimization, we selected Al 87.5Ti 6.25Nb 6.25 (at%) as the experimental alloy composition and subjected it to a 24-hour homogenization heat-treatment at 475°C for attainment of equilibrium, guided by DSC and CALPHAD-derived melting point data. Phase and microstructure analysis revealed a microstructure with approximately 50 vol% of a FCC Al-rich matrix and 50 vol% of trialuminide phases for strengthening. The experimental onset melting point of the Al-rich matrix was determined to be 647°C, which significantly surpasses Al-Si based high-temperature alloys (577 ℃), showcasing the potential of this alloy as a high-temperature structural material. Nanoindentation tests demonstrated exceptional mechanical properties. The alloy was found to have a microhardness of 3350 MPa, which not only outperformed 7075 Al alloy, A390 Al-Si alloy, and commercially pure Ti but also exceeds the levels of Ti-6Al-4V alloy at nearly 28% lower density. This study`s significance lies in its integration of CALPHAD predictions and meticulous microstructural investigation, offering an effective approach for the design and characterization of novel Al-based alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Alloy design for aircraft engines10.1038/nmat4709 ↗
2. Mechanical properties of Al (Sc, Zr) alloys at ambient and elevated temperatures10.1016/S1359-6454(03)00320-3 ↗
3. Ambient and high temperature mechanical properties of isochronally aged Al–0.06Sc, Al–0.06Zr and Al–0.06Sc–0.06Zr (at%) alloys10.1016/j.actamat.2010.10.017 ↗
4. The scandium effect in multicomponent alloys10.1080/09506608.2015.1137692 ↗
5. Erbium and ytterbium solubilities and diffusivities in aluminum as determined by nanoscale characterization of precipitates10.1016/j.actamat.2009.05.007 ↗
6. Enhanced elevated-temperature properties via Mo addition in Al-Mn-Mg 3004 alloy10.1016/j.jallcom.2016.10.005 ↗
7. Enhanced dispersoid precipitation and dispersion strengthening in an Al alloy by microalloying with Cd10.1016/j.actamat.2018.07.001 ↗
8. Chapter 2 - Aluminum
9. Criteria for developing castable creep resistant aluminium-based alloys-A Review10.3139/146.101249 ↗
10. Davis · 1993
11. Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys10.1007/s11661-007-9283-6 ↗
12. Mechanical and thermal stabilty of aluminium- titanium alloys
13. High temperature deformation of submicron grained Al-12 wt% Ti alloy10.1016/S1359-6462(97)00043-2 ↗
14. Al–(L12) Al3Ti nanocomposites prepared by mechanical alloying: Synthesis and mechanical properties10.1016/j.jallcom.2009.10.274 ↗
15. Microstructure-hardness relationship of Al–(L12) Al3Ti nanocomposites prepared by rapid solidification processing10.1016/j.intermet.2009.09.009 ↗
16. The ambient and high temperature deformation behavior of Al–Si–Cu–Mg alloy with minor Ti, Zr, Ni additions10.1016/j.matdes.2014.01.041 ↗
17. Structure and properties of cast Al–Si based alloy with Zr–V–Ti additions and its evaluation of high temperature performance10.1016/j.jallcom.2013.11.209 ↗
18. Ageing characteristics and high-temperature tensile properties of Al–Si–Cu–Mg alloys with micro-additions of Mo and Mn10.1016/j.msea.2016.12.044 ↗
19. Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation10.1016/j.msea.2019.138279 ↗
20. Design of a novel Al-Ti-Zr lightweight alloy: CALPHAD and experiments10.1016/j.jallcom.2020.155304 ↗
21. The Al–B–Nb–Ti system: IV. Experimental study and thermodynamic re-evaluation of the binary Al–Nb and ternary Al–Nb–Ti systems10.1016/j.jallcom.2008.05.008 ↗
22. The Thermo-Calc databank system10.1016/0364-5916(85)90021-5 ↗
23. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
24. Second Edition, Butterworth-Heinemann, London
25. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
26. M. Hillert, Phase Equilibria, Phase Diagrams and Phase Transformations, Cambridge University Press, Cambridge, 2007. 〈www.cambridge.org/9780521853514〉.10.1017/CBO9780511812781 ↗
27. Microstructure and mechanical behavior of Al 7075-T6 subjected to shallow cryogenic treatment10.1007/s11665-016-2052-1 ↗
28. Structure and properties of melt-spun Al-Zr-Ti alloys, Microstructure and microhardness stability at elevated temperatures
29. Surface modification of A390 alloy with CaB6 composite coating10.1016/j.jmrt.2019.11.067 ↗
30. A study of the microstructure and hardness of two titanium alloys: commercially pure and Ti–6Al–4V10.1016/j.jallcom.2009.06.172 ↗
31. Ashby · 2005