Corrosion behaviour of plasma-sprayed baghdadite bioceramic coatings reinforced with carbon nanotubes
Source abstract
Abstract
Bioceramics have been extensively used for the restoration and replacement of hard tissues, such as bones and teeth due to their physicochemical resemblance to these tissues. This study focuses on enhancing the properties of plasma-sprayed bioceramic coatings with the addition of carbon nanotubes. The coatings deposited include hydroxyapatite, baghdadite, and baghdadite with carbon nanotube reinforcement. The effect of incorporating carbon nanotubes into baghdadite coatings is thoroughly investigated in terms of microstructural, mechanical, and electrochemical properties. Multiple characterization techniques such as scanning electron microscopy, energy dispersive spectroscopy, X-ray diffractometry, and Raman spectroscopy have been employed to reveal microstructural details, elemental composition , and phase constituents of the deposited coatings. The results indicate that baghdadite coatings exhibit higher porosity compared to hydroxyapatite coatings. However, the addition of carbon nanotubes as reinforcement into baghdadite coatings effectively reduces porosity by integrating carbon nanotubes within the inter-lamellae structure and filling voids within the inter-splat regions. This integration also mitigates common post plasma spray defects including porosity, voids, and microcracks. The incorporation of 2 wt% carbon nanotubes into the baghdadite matrix results in a substantial 80% reduction in corrosion current density(Icorr). This reduction is attributed to the combined effects of reduced porosity, and improved structural integrity due to carbon nanotubes. Furthermore, the carbon nanotubes reinforced baghdadite coatings have indicated the healthy development of the MC3T3-E1 osteoblast cell line.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. On the nature of biomaterials10.1016/j.biomaterials.2009.07.027 ↗
2. Surface analysis and corrosion resistance of a new titanium base alloy in simulated body fluids10.1016/j.corsci.2012.08.042 ↗
3. Hip implants: Paper V. Physiological effects10.1016/j.matdes.2004.10.028 ↗
4. Ti based biomaterials, the ultimate choice for orthopaedic implants - A review10.1016/j.pmatsci.2008.06.004 ↗
5. Electrochemical corrosion and bioactivity of titanium-hydroxyapatite composites prepared by spark plasma sintering10.1016/j.corsci.2013.01.032 ↗
6. Developing bioactive composite materials for tissue replacement10.1016/S0142-9612(03)00037-1 ↗
7. T.M. Sridhar, U. Kamachi Mudali, M. Subbaiyan, Preparation and characterisation of electrophoretically deposited hydroxyapatite coatings on type 316L stainless steel, n.d. www.elsevier.com/locate/corsci.
8. Cold spray coatings for biomedical applications
9. On the toughness enhancement in hydroxyapatite-based composites10.1016/j.actamat.2013.05.013 ↗
10. Tribological behavior of plasma-sprayed carbon nanotube-reinforced hydroxyapatite coating in physiological solution10.1016/j.actbio.2007.06.001 ↗
11. Effect of spark plasma sintering on the microstructure and in vitro behavior of plasma sprayed HA coatings10.1016/S0142-9612(03)00082-6 ↗
12. Hydroxyapatite/graphene-nanosheet composite coatings deposited by vacuum cold spraying for biomedical applications: Inherited nanostructures and enhanced properties10.1016/j.carbon.2013.09.088 ↗
13. A review of bioactive silicate ceramics
14. Formation of hydroxyapatite on CaSiO3 powders in simulated body fluid10.1016/S0955-2219(01)00301-6 ↗
15. In vivo evaluation of plasma-sprayed wollastonite coating10.1016/j.biomaterials.2004.09.027 ↗
16. Bioinorganics in bioactive calcium silicate ceramics for bone tissue repair: Bioactivity and biological properties
17. Formation mechanism of nano-hardystonite powder prepared by mechanochemical synthesis10.1016/j.apt.2016.08.010 ↗
18. A stimulatory effect of Ca3ZrSi2O9 bioceramics on cementogenic/osteogenic differentiation of periodontal ligament cells10.1039/C3TB21663B ↗
19. Mechanical evaluation of calcium-zirconium-silicate (baghdadite) obtained by a direct solid-state synthesis route10.1016/j.jmbbm.2014.02.021 ↗
20. Calcium zirconium silicate (baghdadite) ceramic as a biomaterial10.1016/j.ceramint.2020.06.105 ↗
21. Repairing a critical-sized bone defect with highly porous modified and unmodified baghdadite scaffolds10.1016/j.actbio.2012.07.036 ↗
22. Mechanical and chemical properties of Baghdadite coatings manufactured by atmospheric plasma spraying10.1016/j.surfcoat.2019.124945 ↗
23. Development of Cold Sprayed Titanium/Baghdadite Composite Coating for Bio-implant Applications10.1007/s11666-021-01269-w ↗
24. Tribological behavior of cold-sprayed titanium/baghdadite composite coatings in dry and simulated body fluid environments10.1016/j.surfcoat.2021.127727 ↗
25. Surface modification of A390 alloy with CaB6 composite coating10.1016/j.jmrt.2019.11.067 ↗
26. Microstructural and tribological properties of laser-treated cold-sprayed titanium/baghdadite deposits10.1557/s43578-022-00675-2 ↗
27. A. Kumar, D.K. Goyal, R. Kant, H. Singh, Enhancing Corrosion Performance of Cold-Sprayed Tita-2 nium/Baghdadite (Ti/BAG) Bio-Composite Coatings via Laser Treatment 4, 11 (2017). https://doi.org/10.3390/xxxxx.
28. Thermal spray coatings on orthopedic devices: when and how the FDA reviews your coatings10.1007/s11666-018-0759-2 ↗
29. Influence of post coating heat treatment on microstructural, mechanical and electrochemical corrosion behaviour of vacuum plasma sprayed reinforced hydroxyapatite coatings10.1016/j.jmbbm.2018.05.030 ↗
30. Corrosion behaviour of plasma sprayed graphene nanoplatelets reinforced hydroxyapatite composite coatings in simulated body fluid10.1016/j.ceramint.2020.02.139 ↗
31. Characterization studies on plasma sprayed (AT/HA) bi-layered nano ceramics coating on biomedical commercially pure titanium dental implant10.1016/j.ceramint.2013.12.116 ↗
32. Effect of critical plasma spray parameters on the microstructure, microhardness and wear and corrosion resistance of plasma sprayed alumina coatings10.1016/j.surfcoat.2012.08.016 ↗
33. Corrosion behavior of carbon nanotubes-Ni composite coating10.1016/j.surfcoat.2004.04.055 ↗
34. Corrosion studies of carbon nanotubes-Zn composite coating10.1016/j.surfcoat.2006.10.034 ↗
35. Characterization of gas tunnel type plasma sprayed hydroxyapatite-nanostructure titania composite coatings10.1016/j.apsusc.2015.04.036 ↗
36. Deposition of HA-TiO2 by plasma spray on β-phase Ti-35Nb-7Ta-5Zr alloy for hip stem: Characterization, mechanical properties, corrosion, and in-vitro bioactivity10.1016/j.surfcoat.2020.126072 ↗
37. Corrosion behavior of plasma sprayed hydroxyapatite and hydroxyapatite-silicon oxide coatings on AISI 304 for biomedical application10.1016/j.apsusc.2013.08.013 ↗
38. In vitro studies of carbon nanotubes biocompatibility10.1016/j.carbon.2005.11.022 ↗
39. Composite materials: Tougher ceramics with nanotubes10.1038/nmat794 ↗
40. Graphene oxide/hydroxyapatite composite coatings fabricated by electrophoretic nanotechnology for biological applications10.1016/j.carbon.2013.09.080 ↗
41. Development of carbon nanotubes reinforced hydroxyapatite composite coatings on titanium by electrodeposition method10.1016/j.corsci.2013.04.021 ↗
42. Powder morphology in thermal spraying10.1002/amp2.10020 ↗
43. G. Singh, H. Singh, B.S. Sidhu, In vitro corrosion investigations of plasma-sprayed hydroxyapatite and hydroxyapatite-calcium phosphate coatings on 316L SS, 2014.10.1007/s12034-014-0106-2 ↗
44. Plasma-Sprayed Hydroxylapatite-Based Coatings: Chemical, Mechanical, Microstructural, and Biomedical Properties10.1007/s11666-016-0421-9 ↗
45. Understanding plasma spraying10.1088/0022-3727/37/9/R02 ↗
46. Characteristics of plasma sprayed coatings produced from carbon nanotube doped ceramic powder feedstock10.1016/j.matdes.2016.09.095 ↗
47. C. Berndt, M. Fahad Hasan, U. Tietz, K. Schmitz, M. Hasan, A Review of Hydroxyapatite Coatings Manufactured by Thermal Spray, (n.d.). https://doi.org/10.1007/978–3-642–53980-0__9.
48. K.A. Gross, C.C. Bernd, P. Stephens, R. Dinnebier, Oxyapatite in hydroxyapatite coatings, 1998.10.1023/A:1004605014652 ↗
49. Thermodynamic modeling of the CaO-SiO2-ZrO2 system coupled with key phase diagram experiments10.1016/j.jeurceramsoc.2016.10.011 ↗
50. A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics10.1016/j.msec.2016.11.084 ↗
51. Vibrational spectra of a baghdadite synthetic analogue10.1016/j.vibspec.2014.11.001 ↗
52. P.N. De Aza, F. Guitiá, C. Santos, S. De Aza, R. Cuscó, L. Artú, Vibrational Properties of Calcium Phosphate Compounds. 2. Comparison between Hydroxyapatite and-Tricalcium Phosphate, 1997. https://pubs.acs.org/sharingguidelines.10.1021/cm9604266 ↗
53. Preparation, characterization, Raman, and terahertz spectroscopy study on carbon nanotubes, graphene nano-sheets, and onion like carbon materials10.1016/j.matchemphys.2016.12.065 ↗
54. Influence of Graphene Nanoplatelets on the Performance of Axial Suspension Plasma-Sprayed Hydroxyapatite Coatings
55. Material Fundamentals and Clinical Performance of Plasma-Sprayed Hydroxyapatite
56. T.M. Lee, R.S. Tsai, E. Chang, C.Y. Yang, M.R. Yang, The cell attachment and morphology of neonatal rat calvarial osteoblasts on the surface of Ti-6Al-4V and plasma-sprayed HA coating: Effect of surface roughness and serum contents, n.d.
57. Surface treatments of titanium dental implants for rapid osseointegration10.1016/j.dental.2006.06.025 ↗
58. K.A. Gross, M. Babovic, Influence of abrasion on the surface characteristics of thermally sprayed hydroxyapatite coatings, 2002.10.1016/S0142-9612(02)00222-3 ↗
59. A. Zeng, E. Liu, I.F. Annergren, S.N. Tan, S. Zhang, P. Hing, J. Gao, EIS capacitance diagnosis of nanoporosity effect on the corrosion protection of DLC films, 2002.10.1016/S0925-9635(01)00568-4 ↗
60. Efficacy of graphene nanosheets on the plasma sprayed hydroxyapatite coating: Improved strength, toughness and in-vitro bioperformance with osteoblast10.1016/j.matdes.2021.109585 ↗
61. Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro10.1016/j.biomaterials.2006.09.013 ↗