journal article·2024-01

High-performance Ti-doped V2O5 coating on the Ni-rich layered cathode: Construction and theoretical calculation

Wei Kang, Ao Jiang, Shanhua Chen, Xin Cao, Xiaoyan Yu, Yuhao Luo, Wenwei Deng

Publisher page

Abstract

Surface coating had been widely acknowledged as an effective method to improve the electrochemical performance of the cathodes for lithium-ion batteries (LiBs). In this study, a high-conductivity Ti 0.05V 1.96O 5 (TVO) coating was successfully deposited on the surface of Li(Ni 0.8Co 0.1Mn 0.1)O 2 (NCM811) particles. The crystal structure, micro morphology and element composition of the resulted NCM811 @TVO samples were evaluated using X-ray diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray photoelectron spectroscopy (XPS) analysis. Subsequently, the electrochemical performance of NCM811 @TVO cathodes were evaluated by galvanostatic charge/discharge tests (GCDT) and electrochemical impedance spectroscopy (EIS). The experimental results suggested that incorporating a TVO coating on the NCM811 cathode effectively enhanced both the rate capability and the cycling stability. Furthermore, first-principles calculation based on the density functional theory (DFT) were performed to elucidate the distinct electronic structure and Li ion migration behavior of V 2O 5 and TVO. The DFT calculation demonstrated that the introduction of Ti ions into the V 2O 5 leaded to the formation of small polarons and excessive free electrons, while significantly reduced the energy barrier for Li + migration along [100] direction.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Opportunities, barriers and issues with renewable energy development – a discussion10.1016/j.rser.2016.09.137 ↗
2. Waveform differential based pilot protection for transmission line connected to renewable energy sources10.1016/j.ijepes.2023.108993 ↗
3. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
4. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
5. Iron–zinc sulfide Fe2Zn3S5/Fe1−xS@C derived from a metal–organic framework as a high performance anode material for lithium-ion batteries10.1039/C9TA03271A ↗
6. High-performance Li-ion batteries using nickel-rich lithium nickel cobalt aluminium oxide-nanocarbon core-shell cathode: in operando X-ray diffraction10.1021/acsami.9b06553 ↗
7. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
8. Surface/Interfacial structure and chemistry of high-energy nickel-rich layered oxide cathodes: advances and perspectives10.1002/smll.201701802 ↗
9. Microcrack generation and modification of Ni-rich cathodes for Li-ion batteries: a review
10. Which is the winner between the single-crystalline and polycrystalline LiNi0.80Co0.15Al0.05O2 cathode in the lithium-ion battery?
11. Stabilization strategies for high-capacity NCM materials targeting for safety and durability improvements10.1016/j.etran.2023.100233 ↗
12. Recent progress in coatings and methods of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials: a short review10.1016/j.ceramint.2020.06.091 ↗
13. Valuation of surface coatings in high-energy density lithium-ion battery cathode materials10.1016/j.ensm.2021.03.015 ↗
14. Ni-rich layered cathodes for lithium-ion batteries: from challenges to the future
15. Constructing effective TiO2 nano-coating for high-voltage Ni-rich cathode materials for lithium ion batteries by precise kinetic control10.1016/j.jpowsour.2020.228745 ↗
16. Effects of Al2O3 and LiAlO2 Co-coating on electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode materials10.1016/j.ceramint.2023.01.179 ↗
17. Al-doped ZnO (AZO) modified LiNi0.8Co0.1Mn0.1O2 and their performance as cathode material for lithium ion batteries10.1016/j.matchemphys.2020.123085 ↗
18. Facile preparation of hierarchical vanadium pentoxide (V2O5)/titanium dioxide (TiO2) heterojunction composite nano-arrays for high performance supercapacitor10.1016/j.jpowsour.2018.10.005 ↗
19. Enhanced electrochemical properties of lithium-reactive V2O5 coated on the LiNi0.8Co0.1Mn0.1O2 cathode material for lithium ion batteries at 60 °C10.1039/C2TA00678B ↗
20. Enhanced rate performance and mitigated capacity decay of single-crystal LiNi0.8Co0.1Mn0.1O2 by the synergism of Mg doping and V2O5 coating10.1016/j.jelechem.2023.117202 ↗
21. A new modification strategy for improving the electrochemical performance of high-nickel cathode material: V2O5 particles anchored on rGO sheets as a dual coating layer10.1016/j.apsusc.2022.152878 ↗
22. Durability-reinforced electrochromic device based on surface-confined Ti-doped V2O5 and solution-phase viologen10.1016/j.electacta.2017.07.049 ↗
23. The analysis of a plane wave pseudopotential density functional theory code on a GPU machine10.1016/j.cpc.2012.08.002 ↗
24. Fast plane wave density functional theory molecular dynamics calculations on multi-GPU machines10.1016/j.jcp.2013.05.005 ↗
25. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
26. Ab initio investigations on metal ion pre-intercalation strategy of layered V2O5 cathode for magnesium-ion batteries10.1016/j.apsusc.2021.150983 ↗
27. Enhanced sodium-ion mobility and electronic transport of hydrogen-incorporated V2O5 electrode materials10.1021/acs.jpcc.7b00481 ↗
28. Comparison of standard DFT and Hubbard-DFT methods in structural and electronic properties of TiO2 polymorphs and H-titanate ultrathin sheets for DSSC application10.1016/j.apsusc.2017.09.141 ↗
29. A DFT+U study of the mars van krevelen mechanism of CO oxidation on Au/TiO2 catalysts10.1016/j.apcata.2016.03.021 ↗
30. To be support or promoter: the mode of introducing ceria into commercial V2O5/TiO2 catalyst for enhanced Hg0 oxidation10.1016/j.jhazmat.2023.131489 ↗
31. Surface modification of the LiNi0.8Co0.1Mn0.1O2 cathode material by coating with FePO4 with a yolk-shell structure for improved electrochemical performance10.1021/acsami.0c07931 ↗
32. Enhanced electrochemical performance of Ni-rich cathode materials with Li1.3Al0.3Ti1.7(PO4)3 coating10.1021/acssuschemeng.9b05539 ↗
33. Comparative study of LiCoO2, LiNi1/2Co1/2O2 and LiNiO2 for 4 volt secondary lithium cells10.1016/0013-4686(93)80046-3 ↗
34. Synthesis and characterization of Al-substituted LiNi0.5Co0.2Mn0.3O2 cathode materials by a modified co-precipitation method10.1039/C7RA04714B ↗
35. An effective etching-induced coating strategy to shield LiNi0.8Co0.1Mn0.1O2 electrode materials by LiAlO210.1016/j.jpowsour.2018.11.062 ↗
36. Effect of dual improved electronic and cationic conductivity via W doping on cyclability and rate performance of LiNi0.90Co0.04Mn0.03Al0.03O2 cathode for rechargeable LiBs10.1016/j.est.2023.107088 ↗
37. Novel 2D sulfur-doped V2O5 flakes and their applications in photoelectrochemical water oxidation and high-performance energy storage supercapacitors
38. Vibrational spectra and valence force field of crystalline V2O510.1016/0584-8539(83)80040-3 ↗
39. Thermodynamics of native defects in V2O5 crystal: a first-principles method10.1016/j.commatsci.2023.112071 ↗
40. Structural and electronic properties of V2O5 and their tuning by doping with 3d elements - modelling using the DFT plus U method and dispersion correction10.1039/C8CP00992A ↗
41. High performance of V2O5 thin film electrodes for lithium-ion intercalation10.1016/j.apsusc.2021.151710 ↗