journal article·2024-01

Exploring Li-CO2 batteries with electrospun PAN-derived carbon nanofibers and Li1.4Al0.4Ti1.6(PO4)3 solid-state electrolyte

Dan Na, Roopa Kishore Kampara, Dohyeon Yu, Baeksang Yoon, Dae Young Lee, Inseok Seo

Publisher page

Abstract

This study introduces a highly stable and conductive sodium super ionic conductor-type solid electrolyte, Li 1.4Al 0.4Ti 1.6(PO 4) 3 (LATP), to address safety concerns and mesoporous-structured polyacrylonitrile (PAN)-derived carbon nanofibers (CNFs) as a cathode material, which has the advantages of high affinity and adsorption of CO 2 gas. LATP, an inorganic solid electrolyte, was synthesized using a solution-based method and its structural properties were assessed using X-ray diffraction and Raman spectroscopy. The ionic conductivity of LATP pellets was approximately 5.87 × 10 −4 S cm −1 . The gas adsorption properties and pore size distributions of the electrospun PAN-derived CNFs were analyzed using the Brunauer-Emmett-Teller method. A fabricated Li-CO 2 battery successfully operated for 50 cycles with a current density of 50 mA g −1 and a cut-off capacity of 500 mAh g −1. Finally, a post-mortem analysis of the Li-CO 2 battery was conducted using field-emission scanning electron microscopy and Raman and X-ray photoelectron spectroscopy to examine the electrode degradation mechanism. The analysis indicated that Li 2CO 3 was produced by the electrochemical reaction in the Li-CO 2 batteries, causing electrode degradation. Therefore, improving the sluggish kinetics of Li 2CO 3 decomposition using a catalyst embedded in PAN-derived CNFs will realize high-performance Li-CO 2 batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Challenges in achieving sustainable development goal 7: affordable and clean energy in light of nascent technologies
2. Emerging trends in biomass-derived porous carbon materials for energy storage application: a critical review
3. Molten salt strategies towards carbon materials for energy storage and conversion10.1016/j.ensm.2021.02.048 ↗
4. In-built ultraconformal interphases enable high-safety practical lithium batteries10.1016/j.ensm.2021.09.007 ↗
5. Nanoscale advanced carbons as an anode for lithium-ion battery
6. Machine learning for beyond Li-ion batteries: powering the research10.1016/j.est.2023.109057 ↗
7. Rational design of nanostructured metal/C interface in 3D self-supporting cellulose carbon aerogel facilitating high-performance Li-CO2 batteries
8. Decreasing the overpotential of aprotic Li-CO2 batteries with the in-plane alloy structure in ultrathin 2D Ru-based nanosheets
9. Recent advances in rechargeable Li–CO2 batteries10.1021/acs.energyfuels.1c00635 ↗
10. Homogenizing Li2CO3 nucleation and growth through high-density single-atomic Ru loading toward reversible Li-CO2 reaction10.1021/acsami.2c02249 ↗
11. Redox mediator-enhanced performance and generation of singlet oxygen in Li–CO2 batteries10.1021/acsami.1c09688 ↗
12. Hierarchical Ti3C2Tx MXene/carbon nanotubes for low overpotential and long-life Li-CO2 batteries10.1021/acsnano.0c10558 ↗
13. A review of lithium-O2/CO2 and lithium-CO2 batteries: advanced electrodes/materials/electrolytes and functional mechanisms10.1016/j.nanoen.2022.106964 ↗
14. Revisiting the role of discharge products in Li-CO2 batteries
15. Synergistic effect of bifunctional catalytic sites and defect engineering for high-performance Li–CO2 batteries10.1016/j.ensm.2020.01.021 ↗
16. Defect engineering of high-loading single-atom catalysts for electrochemical carbon dioxide reduction
17. Rechargeable Li/CO2–O2 (2: 1) battery and Li/CO2 battery10.1039/c3ee43318h ↗
18. A reversible lithium–CO2 battery with Ru nanoparticles as a cathode catalyst10.1039/C6EE03770D ↗
19. Rechargeable Li–CO2 batteries with carbon nanotubes as air cathodes10.1039/C5CC05767A ↗
20. Dual catalytic sites of alloying effect bloom CO2 catalytic conversion for highly stable Li–CO2 battery
21. Bimetallic RuNi electrocatalyst coated MWCNTs cathode for an efficient and stable Li−CO2 and Li−CO2 mars batteries performance with low overpotential10.1002/cssc.202300734 ↗
22. Li1.4Al0.4Ti1.6(PO4)3 inorganic solid electrolyte for all-solid-state Li-CO2 batteries with MWCNT and Ru nanoparticle catalysts10.1016/j.mtener.2023.101418 ↗
23. The first introduction of graphene to rechargeable Li–CO2 batteries10.1002/anie.201501214 ↗
24. Engineering the active sites of graphene catalyst: from CO2 activation to activate Li-CO2 batteries10.1021/acsnano.1c00756 ↗
25. Toward an understanding of the reversible Li-CO2 batteries over metal–N4-functionalized graphene electrocatalysts10.1021/acsnano.1c10007 ↗
26. High-performance, long-life, rechargeable Li–CO2 batteries based on a 3D holey graphene cathode implanted with single iron atoms10.1002/adma.201907436 ↗
27. Targeted synergy between adjacent Co atoms on graphene oxide as an efficient new electrocatalyst for Li–CO2 batteries10.1002/adfm.201904206 ↗
28. Fundamental and recent progress on the strengthening strategies for fabrication of polyacrylonitrile (PAN)-derived electrospun CNFs: precursors, spinning and collection, and post-treatments10.1016/j.jiec.2022.03.005 ↗
29. Three-dimensional, heteroatom-enriched, porous carbon nanofiber flexible paper for free-standing supercapacitor electrode materials derived from microalgae oil10.1016/j.fuproc.2021.107055 ↗
30. Salt-activated phenolic resin/PAN-derived core-sheath nanostructured carbon nanofiber composites for capacitive energy storage10.1007/s42823-022-00451-6 ↗
31. Structural study of polyacrylonitrile-based carbon nanofibers for understanding gas adsorption10.1021/acsami.1c13541 ↗
32. Electrospun composites made of reduced graphene oxide and polyacrylonitrile-based activated carbon nanofibers (rGO/ACNF) for enhanced CO2 adsorption
33. Adsorption of carbon dioxide with Ni-MOF-74 and MWCNT incorporated poly acrylonitrile nanofibers10.3390/nano12030412 ↗
34. Electrospun carbon nanofibers with multi-aperture/opening porous hierarchical structure for efficient CO2 adsorption10.1016/j.jcis.2019.11.041 ↗
35. Recent progress in the synthesis of porous carbon materials10.1002/adma.200501576 ↗
36. Determination of the optimal pore size for improved CO2 adsorption in activated carbon fibers10.1016/j.jcis.2012.09.018 ↗
37. Engineering pore surface and morphology of microporous organic polymers for improved affinity towards CO210.1016/j.cej.2019.05.003 ↗
38. High flashpoint and eco-friendly electrolyte solvent for lithium-ion batteries10.3390/batteries9070348 ↗
39. Non-flammable fluorinated phosphorus(III)-based electrolytes for advanced lithium-ion battery performance10.1002/celc.202000386 ↗
40. Na–CO2 battery with NASICON-structured solid-state electrolyte10.1016/j.nanoen.2021.105972 ↗
41. Recent progress and prospects of Li-CO2 batteries: mechanisms, catalysts and electrolytes10.1016/j.ensm.2020.09.014 ↗
42. Effective Ru/CNT cathode for rechargeable solid-state Li–CO2 batteries10.1021/acsami.1c11000 ↗
43. Progress and future prospects of high-voltage and high-safety electrolytes in advanced lithium batteries: from liquid to solid electrolytes10.1039/C8TA03358G ↗
44. Li1·5Al0·3Si0·2Ti1·7P2·8O12 inorganic solid electrolyte for high-performance all-solid-state Li-ion batteries
45. Designing solid-state electrolytes for safe, energy-dense batteries10.1038/s41578-019-0165-5 ↗
46. A performance and cost overview of selected solid-state electrolytes: race between polymer electrolytes and inorganic sulfide electrolytes10.3390/batteries7010018 ↗
47. Sulfide and oxide inorganic solid electrolytes for all-solid-state Li batteries: a review10.3390/nano10081606 ↗
48. Air-stable inorganic solid-state electrolytes for high energy density lithium batteries: challenges, strategies, and prospects10.1002/inf2.12248 ↗
49. Recent advances in conduction mechanisms, synthesis methods, and improvement strategies for Li1+xAlxTi2−x(PO4)3 solid electrolyte for all-solid-state lithium batteries
50. Recent advances and challenges in the design of Li–air batteries oriented solid-state electrolytes10.1002/bte2.20220014 ↗
51. A new insight into the LiTiOPO4 as an anode material for lithium ion batteries10.1016/j.electacta.2015.10.124 ↗
52. Enhancing the interface stability of Li1.3Al0.3Ti1.7(PO4)3 and lithium metal by amorphous Li1.5Al0.5Ge1.5(PO4)3 modification10.1007/s11581-020-03503-x ↗
53. Intercalation and conversion reactions in Ni0.5TiOPO4 Li-ion battery anode materials10.1016/j.jpowsour.2012.12.031 ↗
54. High lithium ionic conductivity in the Li1+xAlxGeyTi2-x-y(PO4)3 NASICON series10.1021/cm021717j ↗
55. Low-temperature fabrication of NASICON-type LATP with superior ionic conductivity10.1016/j.ceramint.2022.08.264 ↗
56. Increase in ionic conductivity of NASICON-type solid electrolyte Li1.5Al0.5Ti1.5(PO4)3 by Nb2O5 doping10.1016/j.ssi.2020.115399 ↗
57. Microstructure and ionic conductivities of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 solid electrolytes produced by cold sintering assisted process10.1016/j.jallcom.2023.168702 ↗
58. Thermal, electrical and surface hydrophobic properties of electrospun polyacrylonitrile nanofibers for structural health monitoring10.3390/ma8105356 ↗
59. Synthesis of mesoporous g-C3N4/S-PAN π-conjugation heterojunction via sulfur-induced cyclization reaction for enhanced photocatalytic H2 production10.1016/j.ijhydene.2019.06.038 ↗
60. Simultaneous electrospinning and electrospraying for the preparation of a precursor membrane containing hydrothermally generated biochar particles to produce the value-added product of carbon nanofibrous felt
61. Cicada slough-derived heteroatom incorporated porous carbon for supercapacitor: Ultra-high gravimetric capacitance10.1016/j.carbon.2018.11.011 ↗
62. Recent advances in lithium–carbon dioxide batteries10.1002/sstr.202000027 ↗
63. Carbon tube-based cathode for Li-CO2 batteries: a review10.3390/nano12122063 ↗
64. Single-atom Ru implanted on Co3O4 nanosheets as efficient dual-catalyst for Li-CO2 batteries10.1002/advs.202102550 ↗
65. High-performance Li-CO2 batteries based on metal-free carbon quantum dot/Holey graphene composite catalysts10.1002/adfm.201804630 ↗
66. Designing electrophilic and nucleophilic dual centers in the ReS2 plane toward efficient bifunctional catalysts for Li-CO2 batteries10.1021/jacs.1c12096 ↗
67. Highly safe and stable Li–CO2 batteries using conducting ceramic solid electrolyte and MWCNT composite cathode10.1016/j.electacta.2022.140408 ↗
68. Electrochemistry of graphene and related materials10.1021/cr500023c ↗
69. Understanding the role of nitrogen in plasma-assisted surface modification of magnetic recording media with and without ultrathin carbon overcoats10.1038/srep07772 ↗
70. Plasma-assisted and thermal atomic layer deposition of electrochemically active Li2CO310.1039/C7RA07722J ↗