In-situ investigation of dynamic precipitation in pre-aged Al-Zn-Mg-Cu alloy AA7075
Source abstract
Abstract
High strength Al-Zn-Mg-Cu alloys rely for their properties on nano-scaled precipitates formed during artificial ageing. Deformation profoundly affects the evolution of these precipitates. This study investigates the effect of warm deformation on precipitation in a pre-aged AA7075 aluminium alloy. Warm deformation was performed using an electro-thermomechanical testing machine for rapid resistance heating. Transmission electron microscopy showed slightly larger, yet evenly distributed, precipitates in the warm deformed sample compared to the thermally treated condition without deformation. Synchrotron small angle X-ray scattering revealed accelerated growth rates of precipitates due to deformation. At low plastic strains, the growth rate increased linearly with applied strain, while at high plastic strains, a slight deviation from linear behaviour was observed. Temperature and strain rate effects were also examined, with a stronger enhancement effect at low temperature and fast strain rate for a given strain. The deformation enhancement effect disappeared rapidly upon finishing plastic deformation (within 400 s for the studied condition). The enhanced growth rate during and after deformation can be reasonably explained by the excess vacancy concentration, indicating the influence of strain-induced excess vacancies. However, the simple excess vacancy model used fails to explain the observed strain rate effect, and possible explanations for this discrepancy are discussed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Influence of predeformation on ageing in an al–zn–mg alloy—i. microstructure evolution and mechanical properties10.1016/S1359-6454(98)00293-6 ↗
2. In situ evaluation of dynamic precipitation during plastic straining of an al–zn–mg–cu alloy10.1016/j.actamat.2012.01.002 ↗
3. Precipitation kinetics in warm forming of aw-7020 alloy10.1016/j.msea.2012.10.031 ↗
4. An investigation of the strain dependence of dynamic precipitation in an al-zn-mg-cu alloy10.1016/j.scriptamat.2017.04.031 ↗
5. Direct observation of the dynamic evolution of precipitates in aluminium alloy 7021 at high strain rates via high energy synchrotron x-rays10.1016/j.actamat.2020.116532 ↗
6. Dynamic precipitation in supersaturated al–zn–mg–cu alloy during warm stretching
7. Quantitative measurements of dynamic precipitation during fatigue of an al–zn–mg–(cu) alloy using small-angle x-ray scattering10.1016/j.actamat.2014.04.027 ↗
8. Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity10.1126/science.aav7086 ↗
9. Deformation enhanced diffusion in aluminium alloys10.1007/s11661-020-05960-5 ↗
10. Modelling dynamic precipitation in pre-aged aluminium alloys under warm forming conditions10.1016/j.actamat.2022.118036 ↗
11. I12: the joint engineering, environment and processing (jeep) beamline at diamond light source10.1107/S1600577515003513 ↗
12. Data analysis workbench (dawn)10.1107/S1600577515002283 ↗
13. Precipitate characterisation in metallic systems by small-angle x-ray or neutron scattering10.1016/j.crhy.2011.12.008 ↗
14. In-situ small-angle x-ray scattering study of dynamic precipitation in an al-zn-mg-cu alloy10.1080/0141861021000051091 ↗
15. In situ anomalous small-angle x-ray scattering from metal particles in supported-metal catalysts. ii. results10.1107/S0021889805002165 ↗
16. Quantitative characterization of precipitate microstructures in metallic alloys using small-angle scattering10.1007/s11661-012-1435-7 ↗
17. Microstructural stability and paint bake response of pre-aged aa707510.1016/j.matchar.2023.112862 ↗
18. Understanding the effect of deformation combined with heat treatment on age hardening of al-zn-mg-cu alloy aa707510.1016/j.msea.2023.145212 ↗
19. Modelling the effect of deformation-induced vacancies on segregation and precipitation10.1016/0956-7151(94)90056-6 ↗
20. The nucleation of precipitates: the system al-zn-mg10.1016/0001-6160(65)90067-2 ↗
21. Atomistic study of pipe diffusion in al–mg alloys10.1016/j.actamat.2003.09.002 ↗