Manipulating microstructure and mechanical properties of laser powder bed fusion processed hypo-eutectic Al-13.3Mg2Si alloy via annealing
Source abstract
Abstract
The annealing of a hypo-eutectic Al-13.3 wt%Mg 2 Si alloy processed by laser powder bed fusion (LPBF) was carried out for the correlation between the evolution of cellular eutectic Mg 2Si and mechanical properties. The LPBFed Al-13.3Mg 2Si was featured by cellular eutectic Mg 2Si and free Mg 2Si inside the α-Al matrix. Under the annealed conditions (200 ºC ∼ 450 ºC), the metastable cellular structures consisted of eutectic Mg 2Si were gradually transferred to spherical free Mg 2Si and eventually to stable polygon-like Mg 2 Si, thus leading to a decrease in tensile strength caused by the weakening of cellular boundary strengthening and dispersion strengthening. Moreover, over-annealing (>350 ºC) resulted in a drastic reduction in the ductility due to the formation of coarse polygon-like Mg 2 Si. The superior strength-ductility synergy (i.e. ultimate tensile strength (UTS) of 506 MPa and elongation (El) of 6%) has been obtained after annealing at 200 ºC for 6 h. The mechanism for the property improvement can be mainly attributed to the precipitation of partial cellular eutectic Mg 2 Si. The results demonstrate that it is possible to expand the scope of properties of LPBFed Al alloys through manipulating the metastable microstructures via annealing.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
2. Effect of iron on the microstructure and mechanical property of Al-Mg-Si-Mn and A-Mg-Si diecast alloys10.1016/j.msea.2012.11.095 ↗
3. The localization of plastic deformation in the precipitate free zone of an Al-Mg-Si-Mn alloy10.1016/j.actamat.2022.117872 ↗
4. Effect of Ag addition on the precipitation evolution and interfacial segregation for Al-Mg-Si alloy10.1016/j.actamat.2019.09.015 ↗
5. Metal additive manufacturing in aerospace: a review10.1016/j.matdes.2021.110008 ↗
6. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
7. A review of laser powder bed fusion additive manufacturing of aluminium alloys: microstructure and properties
8. Additive manufacturing of metals10.1016/j.actamat.2016.07.019 ↗
9. Effects of annealing on the microstructure and mechanical properties of selective laser melted AlSi7Mg alloy10.1016/j.msea.2018.10.047 ↗
10. Microstructure and strength of selectively laser melted AlSi10Mg10.1016/j.actamat.2016.07.012 ↗
11. A high Fe-containing AlSi12 alloy fabricated by laser powder bed fusion10.1016/j.jmrt.2022.04.008 ↗
12. Processing and characterization of crack-free aluminum 6061 using high-temperature heating in laser powder bed fusion additive manufacturing
13. Additive manufacturing and mechanical properties of the dense and crack free Zr-modified aluminum alloy 6061 fabricated by the laser-powder bed fusion
14. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
15. High-temperature strength sustained by nano-sized eutectic structure of Al–Fe alloy manufactured by laser powder bed fusion10.1016/j.msea.2022.142782 ↗
16. A high-strength heat-resistant Al−5.7Ni eutectic alloy with spherical Al3Ni nano-particles by selective laser melting10.1016/j.scriptamat.2021.114034 ↗
17. High-performance co-continuous Al-Ce-Mg alloy with in-situ nano-network structure fabricated by laser powder bed fusion
18. Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: cracking elimination by co-incorporation of Si and TiB2
19. On the Si-induced microstructure evolution, solidification cracking healing and strengthening behavior of laser powder bed fusion additive manufactured Al-Cu-Mg/Si alloys10.1016/j.jmatprotec.2023.117860 ↗
20. The effects of varying Mg and Si levels on the microstructural inhomogeneity and eutectic Mg2Si morphology in die-cast Al-Mg-Si alloys10.1007/s10853-018-03198-6 ↗
21. Developing a novel high-strength Al–Mg–Zn–Si alloy for laser powder bed fusion10.1016/j.msea.2022.143636 ↗
22. Additive manufacturing of a high strength Al-5Mg2Si-2Mg alloy: microstructure and mechanical properties10.1016/j.jmst.2021.02.048 ↗
23. Microstructure and mechanical properties of pseudo binary eutectic Al-Mg2Si alloy processed by laser powder bed fusion10.1016/j.jmrt.2023.03.147 ↗
24. Strength and strain hardening of a selective laser melted AlSi10Mg alloy10.1016/j.scriptamat.2017.07.025 ↗
25. Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability10.1016/j.msea.2020.139079 ↗
26. Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting10.1016/j.msea.2016.11.059 ↗
27. Achieving superior mechanical properties of selective laser melted AlSi10Mg via direct aging treatment10.1016/j.jmst.2021.07.059 ↗
28. Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: microstructure evolution, mechanical properties and fracture mechanism10.1016/j.msea.2016.03.088 ↗
29. Effect of heat treatments on the mechanical and microstructural behavior of a hypoeutectic Al alloy obtained by laser powder bed fusion10.1016/j.msea.2022.144091 ↗
30. Enhancement in strength and thermal stability of selective laser melted Al-12Si by introducing titanium nanoparticles10.1016/j.msea.2022.143833 ↗
31. Effect of heat treatment on the microstructure and mechanical properties of an Al-5Mg2Si-2Mg alloy processed by laser powder bed fusion10.1016/j.jallcom.2022.165944 ↗
32. A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility10.1016/j.actamat.2015.05.017 ↗
33. Microstructure and mechanical properties of high-pressure-assisted solidification of in situ Al-Mg2Si composites10.1016/j.msea.2018.07.032 ↗
34. Mechanical properties of a hot deformed Al-Mg2Si in-situ composite10.1016/j.msea.2018.04.064 ↗
35. Effect of equal channel angular pressing on microstructure and mechanical properties of thermally-homogenized Al-Mg2Si composites10.1016/j.matchemphys.2020.124200 ↗
36. Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by selective laser melting10.1016/j.actamat.2019.06.013 ↗
37. Microstructure of selective laser melted AlSi10Mg alloy10.1016/j.matdes.2019.107677 ↗
38. Development of a high strength Al-Mg2Si-Mg-Zn based alloy for high pressure die casting10.1016/j.msea.2014.12.019 ↗
39. The growth of quaternary divorced eutectic in Al-Ce-Si-Mg Alloys10.1007/s11661-022-06911-y ↗
40. Divorced eutectic in a HPDC magnesium-aluminum alloy10.1016/j.jallcom.2003.11.174 ↗
41. The nucleation crystallography and wettability of Mg grains on active Al2Y inoculants in an Mg-10wt% Y Alloy10.1016/j.jallcom.2013.10.042 ↗
42. Characterization and modeling of precipitation kinetics in an Al-Zn-Mg alloy10.1016/S0921-5093(00)01247-8 ↗
43. Quantitative evaluation of precipitates in an Al-Zn-Mg-Cu alloy after isothermal aging10.1016/j.matchar.2005.10.004 ↗
44. Morphological evolution and growth mechanism of primary Mg2Si phase in Al-Mg2Si alloys10.1016/j.actamat.2010.10.036 ↗
45. The effect of solution temperature on the microstructure and tensile properties of Al-15%Mg2Si composite10.1016/j.matdes.2011.01.020 ↗
46. Effect of cooling rate on growth and transformation of primary Mg2Si in Al-Mg2Si in situ composites10.1557/jmr.2018.118 ↗
47. Growth morphology of primary silicon in cast Al-Si alloys and the mechanism of concentric growth10.1016/S0022-0248(99)00347-4 ↗
48. Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗