Adjusting of the performance characteristics of the La(Fe,Si)13 compounds and their hydrides for multi-stimuli cooling cycle application
Source abstract
Abstract
The use of multi-stimuli materials is a promising approach for increasing the cooling capacity of magnetic refrigerators. The working body undergoes both a magnetic field and an external compressive pressure during cooling. The proposed material must have outstanding magnetocaloric and mechanical properties. The magnetocaloric properties should provide a high adiabatic temperature change value in a limited field range. Mechanical stability at high pressures and adequate geometry are required to ensure high heat transfer values. The compounds La(Fe,Si) 13 and their hydrides are the most suitable for the manufacture of such devices. They are able to work at both room and cryogenic temperatures. In the article, we present the results of direct measurements of the magnetocaloric effect and mechanical compression tests of the cast and hydrogenated La(Fe,Si) 13H δ rods. The samples were reinforced with a secondary alpha-iron phase, which ensured their mechanical integrity during hydrogenation and cycle performance. The addition of a secondary alpha-iron phase leads to a decrease in the magnetocaloric effect value. Therefore, we determine the optimal content of the secondary phase, which provides a balance between the caloric and mechanical alloy properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic and transport properties of perovskites and related materials · Magnetic Properties of Alloys · Rare-earth and actinide compounds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Magnetocaloric effect: from materials research to refrigeration devices10.1016/j.pmatsci.2017.10.005 ↗
2. New frontiers in magnetic refrigeration with high oscillation energy-efficient electromagnets10.1016/j.apenergy.2018.12.055 ↗
3. Magnetocaloric effect: a review of the thermodynamic cycles in magnetic refrigeration10.1016/j.rser.2012.09.027 ↗
4. Experimental comparison of multi-layered La–Fe–Co–Si and single-layered Gd active magnetic regenerators for use in a room-temperature magnetic refrigerator10.1016/j.ijrefrig.2013.09.003 ↗
5. Maximum performance of an active magnetic regenerator10.1063/5.0067751 ↗
6. A.S. Komlev, R.A. Makarin, T.S. Ilina, D.A. Kiselev, A.M. Chirkova, N.A. Kulesh, A.S. Volegov, V.I. Zverev, N.S. Perov, 3D Time-resolved Analysis of the Evolution Metamagnetic Phase Transition in FeRh System, 2022. 〈https://doi.org/10.48550/arXiv.2211.15984〉.
7. Mastering hysteresis in magnetocaloric materials10.1098/rsta.2015.0308 ↗
8. Predicting the tricritical point composition of a series of LaFeSi magnetocaloric alloys via universal scaling10.1088/1361-6463/aa8792 ↗
9. A quantitative criterion for determining the order of magnetic phase transitions using the magnetocaloric effect10.1038/s41467-018-05111-w ↗
10. Reversibility of the magnetocaloric effect in the bean-rodbell model10.3390/magnetochemistry7050060 ↗
11. The La(Fe,Mn,Si)13Hz magnetic phase transition under pressure10.1002/pssr.201700143 ↗
12. Giant multicaloric response of bulk Fe49Rh5110.1103/PhysRevB.95.104424 ↗
13. Multicaloric materials and effects10.1557/mrs.2018.72 ↗
14. Caloric response of Fe49Rh51 subjected to uniaxial load and magnetic field
15. Pressure enhancement of the giant magnetocaloric effect in LaFe11.6Si1.410.1063/1.2372584 ↗
16. Pressure dependence of magnetic properties in La(Fe,Si)13: multistimulus responsiveness of caloric effects by modeling and experiment10.1103/PhysRevApplied.13.034014 ↗
17. Effect of hydrostatic pressure on the magnetic and lattice properties of the ferromagnet La (Fe0.86Si0.14)1310.1134/S1063783414010387 ↗
18. Pressure effect on the Curie temperature of La(Fe0.88Si0.12−yAly)1310.1088/1742-6596/266/1/012023 ↗
19. Itinerant-electron metamagnetic transition and large magnetovolume effects in La(FexSi1− x)13 compounds10.1103/PhysRevB.65.014410 ↗
20. Itinerant-electron metamagnetic transition and large magnetocaloric effects in La(FexSi1− x)13 compounds and their hydrides10.1103/PhysRevB.67.104416 ↗
21. Making a cool choice: the materials library of magnetic refrigeration10.1002/aenm.201901322 ↗
22. The effect of hydrogen on the multiscale mechanical behaviour of a La(Fe,Mn,Si)13-based magnetocaloric material10.1016/j.jallcom.2022.164274 ↗
23. Kitanovski · 2016
24. Magnetic refrigeration design technologies: state of the art and general perspectives10.3390/en14154662 ↗
25. Study of geometries of active magnetic regenerators for room temperature magnetocaloric refrigeration10.1016/j.applthermaleng.2015.11.113 ↗
26. Plastically deformed Gd-X(X=Y,In,Zr,Ga,B) solid solutions for magnetocaloric regenerator of parallel plate geometry10.1016/j.jallcom.2018.04.264 ↗
27. 1D model of an active magnetic regenerator
28. Numerical analysis of a reciprocating active magnetic regenerator made of gadolinium wires10.1016/j.applthermaleng.2011.11.053 ↗
29. Highperformance solid-state cooling materials: balancing magnetocaloric and nonmagnetic properties in dual phase Lα-Fe-Si10.1016/j.actamat.2016.12.014 ↗
30. Mechanical and magnetocaloric properties of La(Fe,Mn,Si)13Hδ/Cu plates prepared by Cubinding prior to hydrogenation10.1016/j.intermet.2019.01.003 ↗
31. Microstructure, mechanical and magnetocaloric properties of bulk La0.9Ce0.1Fe11.7-xMnxSi1.3 hydrides prepared by high-hydrogen-pressure sintering10.1016/j.jmmm.2019.165889 ↗
32. Heat exchangers from metal-bonded La(Fe,Mn,Si)13Hx powder10.1109/TMAG.2017.2698022 ↗
33. Rohsenow · 1998
34. Kitanovski · 2015
35. Production and properties of metal-bonded La(Fe,Mn,Si)13Hx composite material10.1016/j.actamat.2017.01.054 ↗
36. R. Radebaugh, B. Louie, A simple, first step to the optimization of regenerator geometry, in: Proceedings of the Third Cryocooler Conference, 1985, pp. 177–198.10.6028/NBS.SP.698 ↗
37. The influence of flow maldistribution on the performance of inhomogeneous parallel plate heat exchangers10.1016/j.ijheatmasstransfer.2013.01.018 ↗
38. Predicting the dominating factors during heat transfer in magnetocaloric composite wires10.1016/j.matdes.2020.108832 ↗
39. Strain development during the phase transition of La(Fe,Mn,Si)13Hz10.1063/1.4960358 ↗
40. Properties of composites with La(Fe,Si)13 hydrides and sodium silicate10.1016/j.jmmm.2019.01.011 ↗
41. Novel processing of Cu-bonded La-Ce-Fe-Co-Si magnetocaloric composites for magnetic refrigeration by low-temperature hot pressing10.1557/mrc.2018.105 ↗
42. Study of the microstructure, mechanical, and magnetic properties of LaFe11. 6Si1. 4Hy/Bi magnetocaloric composites10.3390/ma11060943 ↗
43. Table-like magnetocaloric effect and enhanced refrigerant capacity of HPS La(Fe,Si)13-based composites by Ce–Co grain boundary diffusion10.1007/s10853-020-04449-1 ↗
44. The effect of the thermal decomposition reaction on the mechanical and magnetocaloric properties of La(Fe,Si,Co)1310.1016/j.actamat.2012.04.027 ↗
45. Influence of powder bonding on mechanical properties and magnetocaloric effects of La0.9Ce0.1(Fe,Mn)11.7Si1.3H1.810.1016/j.jallcom.2015.02.131 ↗
46. Enhanced mechanical properties and large magnetocaloric effects in bonded La(Fe, Si)13-based magnetic refrigeration materials
47. La0.8Ce0.2(Fe0.95Co0.05)11.8Si1.2/Sn42Bi58 magnetocaloric composites prepared by low temperature hot pressing10.1016/j.jallcom.2017.12.108 ↗
48. Influence of particle size on the mechanical properties and magnetocaloric effect of La0.8Ce0.2(Fe0.95Co0.05)11.8Si1.2/Sn composites10.1016/j.jmmm.2018.05.033 ↗