journal article·2023-08

A new measure to enhance the heat-resistant (4TiC + 5AlN)/Al composite by multi-scale Fe/Mn enrichment effect

Lei Ren, Kai Zhao, Tong Gao, Guiliang Liu, Qianqian Sun, Xiangfa Liu, Sida Liu

Publisher page

Abstract

Developing high-strength Al-based alloys that can operate at 250 °C and above remains a challenge. In this study, a heat-resistant and high-strength (4TiC + 5AlN)/Al–Fe–Mn composite is designed using the liquid–solid reaction and hot extrusion. The strengthening phases, including sub-micron TiC, micron Al 3 (Fe, Mn), nano-sized AlN, and nano-sized Al 3 (Fe, Mn), in which the in–situ AlN particles are distributed in the matrix as networks, exhibit an attractive strengthening effect. Based on the results of electron backscatter diffraction, the extruded (4TiC + 5AlN)/Al–Fe–Mn composite prefers to form fiber texture in the longitudinal and cross-section:<111> Al //ED. And the average grain size of (4TiC + 5AlN)/Al–0.3Fe–0.1Mn composite is 0.69 µm. The ultimate tensile strength of the (4TiC + 5AlN)/Al–Fe–Mn composite is as high as 215 MPa at 350 °C. And the high-temperature elongation of the (4TiC + 5AlN)/Al–Fe–Mn composite is maintained while increasing the high-temperature strength. The improved performance of the (4TiC + 5AlN)/All–Fe–Mn is attributed to the synergistic effect of the multi-scale Al 3(Fe, Mn) phases and particles. Furthermore, the formed micrometer Al 3(Fe, Mn) phases are used to regulate the distribution of the TiC and AlN particles. The nano-Al 3 (Fe, Mn) dispersoids that precipitated during the homogenization can enhance the high-temperature deformation resistance of the matrix. In particular, the Fe and Mn atoms tend to aggregate at the TiC/Al interface, effectively modifying the interfaces between ex-situ TiC particles and the Al matrix. The modified interfaces of TiC/Al are beneficial to load transfer strengthening. The strengthening mechanisms of the (4TiC + 5AlN)/Al–Fe–Mn composite have been analyzed in detail, and the main strength–increasing mechanisms are calculated from the microstructural data. This work may provide an important approach to preparing heat-resistant Al matrix composites with strength-ductility matching.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Development of Al–Mn–Mg 3004 alloy for applications at elevated temperature via dispersoid strengthening10.1016/j.matdes.2015.06.140 ↗
2. The effects of manganese on the Τ–phase and creep resistance in Al–Si–Cu–Mg–Ni alloys10.1016/j.msea.2013.06.030 ↗
3. Thermal stability of (AlSi)x(ZrVTi) intermetallic phases in the Al–Si–Cu–Mg cast alloy with additions of Ti, V, and Zr10.1016/j.tca.2014.08.037 ↗
4. Microstructure and mechanical properties of Al–Si cast alloy with additions of Zr–V–Ti10.1016/j.matdes.2015.05.057 ↗
5. Development of new Al–Cu–Si alloys for high temperature performance10.5185/amlett.2017.1471 ↗
6. A novel heat-resistant Al–Si–Cu–Ni–Mg base material synergistically strengthened by Ni-rich intermetallics and nano–AlNp microskeletons10.1016/j.jmst.2018.09.051 ↗
7. Effect of Fe addition on heat-resistant aluminum alloys produced by selective laser melting10.3390/met9040468 ↗
8. In situ fabrication and microstructure of Al2O3 particles reinforced aluminum matrix composites10.1016/j.msea.2010.01.022 ↗
9. Aluminum metal-matrix composites for automotive applications: tribological considerations10.1023/B:TRIL.0000044492.91991.f3 ↗
10. Liquid-solid reaction mechanism in Al–ZrO2(–B2O3) system and the preparation of (α-Al2O3 + ZrB2/ZrAl3)/Al composites10.1016/j.jallcom.2020.155926 ↗
11. Multiscale architecture and superior high-temperature performance of discontinuously reinforced titanium matrix composites10.1002/adma.202000688 ↗
12. Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy10.1016/j.msea.2009.09.034 ↗
13. A novel Al matrix composite reinforced by nano–AlNp network10.1038/srep34919 ↗
14. Enhanced combination of strength and ductility in ultrafine–grained aluminum composites reinforced with high content intragranular nanoparticles10.1016/j.msea.2018.12.090 ↗
15. Microstructures and mechanical properties of the Al2014 composites reinforced with bimodal sized SiC particles10.1016/j.msea.2015.04.012 ↗
16. A novel core–shell TiC x particle by modifying TiCx with B element and the preparation of the (TiCx + AlN)/Al composite10.1016/j.jallcom.2021.162448 ↗
17. Enhanced combination of strength and ductility in ultrafine–grained aluminum composites reinforced with high content intragranular nanoparticles10.1016/j.msea.2018.12.090 ↗
18. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
19. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
20. Microstructure and mechanical properties of a precipitation–strengthened Al–Zr–Sc–Er–Si alloy with a very small Sc content10.1016/j.actamat.2017.10.040 ↗
21. Characterization of aluminium matrix composites reinforced by Al–Cu–Fe quasicrystalline particles10.1016/j.jallcom.2014.11.125 ↗
22. Thermodynamics of liquid Al-Fe alloys10.1016/S0925-8388(99)00682-9 ↗
23. Structure and mechanical behaviour of Al–Fe–X and Al–Ni–X rapidly solidified alloys10.1016/j.msea.2003.10.035 ↗
24. Thermodynamic assessment of the Aluminum–Manganese (Al–Mn) binary phase diagram10.1361/105497199770335938 ↗
25. Effects of Mg addition on the Al6(Fe,Mn) intermetallic compounds and the grain refinement of α-Al in Al–Fe–Mn alloys
26. Microstructure evolution and high temperature tensile properties of AlNp/Al–Fe composites induced by microalloying10.1016/j.jallcom.2019.02.069 ↗
27. The aluminium-iron eutectic system
28. Growth of Al3Fe in Al–2% Fe eutectic alloy under unidirectional solidification
29. Segregation of alloying elements and their effects on the thermodynamic stability and fracture strength of γ-Ni/γ′-Ni3Al interface10.1007/s10853-020-04854-6 ↗
30. Experimental and numerical investigation of the role of grain boundary misorientation angle on the dislocation–grain boundary interactions10.1002/adem.201000229 ↗
31. Three–dimensional modeling of the grain boundary misorientation angle distribution based on two–dimensional experimental texture measurements10.1016/j.msea.2010.05.037 ↗
32. Enhanced strength and ductility synergy in aluminum composite with heterogeneous structure10.1016/j.msea.2020.139431 ↗
33. About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum10.1088/1757-899X/89/1/012038 ↗
34. Measurement of geometrically necessary dislocation density with high resolution electron backscatter diffraction: Effects of detector binning and step size10.1016/j.ultramic.2012.11.003 ↗
35. EBSD, XRD and SRS characterization of a casting Al–7wt%Si alloy processed by equal channel angular extrusion: Dislocation density evaluation10.1016/j.matchar.2019.04.044 ↗
36. Tensile behavior and dynamic failure of aluminum 6092/B4C composites10.1016/j.msea.2006.06.055 ↗
37. Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites10.1016/j.matdes.2014.10.048 ↗
38. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites10.1016/j.msea.2006.10.184 ↗
39. Development of TiB2 reinforced aluminum foundry alloy based in situ composites–Part II: enhancing the practical aluminum foundry alloys using the improved Al–5wt% TiB2 master composite upon dilution10.1016/j.msea.2014.03.021 ↗
40. Mechanical properties of in–situ TiB2/A356 composites10.1016/j.msea.2013.10.021 ↗
41. An analytical study on strengthening of particulate reinforced metal matrix composites10.1016/1359-6454(95)00150-9 ↗
42. Strengthening mechanisms in particulate metal matrix composites10.1016/0956-716X(91)90349-6 ↗
43. The effect of grain size on the elevated temperature yield strength of polycrystalline aluminum10.1016/0956-716X(91)90165-W ↗
44. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
45. Effects of in situ generated ZrB2 nano-particles on microstructure and tensile properties of 2024Al matrix composites10.1016/j.jallcom.2014.01.117 ↗
46. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
47. Improving the tensile ductility and uniform elongation of high–strength ultrafine–grained Al alloys by lowering the grain boundary misorientation angle10.1016/j.scriptamat.2014.01.020 ↗
48. Microstructures and boundary populations in materials produced by equal channel angular extrusion10.1016/S0921-5093(02)00311-8 ↗
49. Dislocation generation due to differences between the coefficients of thermal expansion10.1016/0025-5416(86)90261-2 ↗
50. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys10.1016/S1359-6454(02)00201-X ↗
51. Effect of secondary processing and nanoscale reinforcement on the mechanical properties of Al–TiC composites
52. Effects of solution treatment on tensile properties and strengthening mechanisms of SiCp/6061Al composites fabricated by powder thixoforming10.1016/j.matdes.2016.03.068 ↗
53. Effects of Zn content on microstructures and mechanical properties of in–situ TiB2/Al-Zn-Mg-Cu composites subjected to hot extrusion10.1016/j.msea.2018.11.030 ↗
54. High-temperature strength of compacted sub–micrometer aluminium powder10.1016/j.actamat.2010.03.021 ↗
55. Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility10.1038/nmat3544 ↗
56. Size dependent strengthening in particle reinforced aluminium10.1016/S1359-6454(01)00327-5 ↗
57. A combined microstructure strengthening analysis of SiCp/Al metal matrix composites10.1016/0010-4361(95)91381-E ↗
58. Creep behavior of a β′(NiAl) precipitation strengthened ferritic Fe–Cr–Ni–Al alloy10.1016/S1359-6454(98)00022-6 ↗
59. Kelly · 1971 · 75
60. Simultaneously Increasing the Ductility and Strength of Nanostructured Alloys10.1002/adma.200600310 ↗
61. Deformation and fracture in martensitic carbon steels tempered at low temperatures10.1007/s11663-001-0044-4 ↗
62. Microstructure–properties relationship in a one–step quenched and partitioned steel10.1016/j.msea.2013.09.063 ↗
63. Crystal substructures of the rotation-twinned T (Al20Cu2Mn3) phase in 2024 aluminum alloy10.1016/j.jallcom.2013.08.200 ↗
64. Effect of Ce addition on microstructure of Al20Cu2Mn3 twin phase in an Al–Cu–Mn casting alloy10.1016/j.msea.2011.11.025 ↗
65. An X–ray diffraction study on dislocation microstructure of as–prepared Al–Al2O3 composites10.1016/j.actamat.2004.02.023 ↗
66. Fabrication of tungsten particles reinforced aluminum matrix composites using multi-pass friction stir processing: evaluation of microstructural, mechanical and electrical behavior10.1016/j.msea.2016.07.124 ↗
67. On the strength of discontinuous silicon carbide reinforced aluminum composites10.1016/0036-9748(86)90210-3 ↗
68. Enhancing high-temperature strength of (B4C+Al2O3)/Al designed for neutron absorbing materials by constructing lamellar structure10.1016/j.compositesb.2019.107674 ↗
69. Analysis of the mechanical properties and deformation behavior of nanostructured commercially pure al processed by equal channel angular pressing (ECAP)10.1016/j.msea.2007.04.075 ↗
70. Comparison between current models for the strength of particulate–reinforced magnesium nanocomposites with emphasis on consideration of Hall–Petch effect10.1016/j.msea.2011.10.043 ↗
71. Cr-induced morphology change of primary Mn-rich phase in Al–Si–Cu–Mn heat resistant aluminum alloys and its contribution to high temperature strength10.1016/j.msea.2017.10.049 ↗
72. Investigation on the high–temperature ductility and fracture mechanisms of an in–situ particle reinforced Al matrix composite 7075Al/TiB210.1016/j.msea.2019.138263 ↗
73. The response of room temperature and high temperature tensile properties to the microstructure variation of an (AlN + Si3N4)/Al composite by heat treatment10.1016/j.msea.2018.07.035 ↗
74. Enhanced mechanical properties of a novel heat resistant Al–based composite reinforced by the combination of nano-aluminides and submicron TiN particles
75. Increasing the ductility of heat-resistant AlNp/Al composites by submicron Al2O3 particles10.1016/j.matchar.2020.110672 ↗
76. Design of an in–situ multi–scale particles reinforced (Al2O3 + ZrB2 + AlN)/Al composite with high strength, elasticity modulus and thermal stability10.1016/j.msea.2020.138983 ↗
77. High-temperature mechanical properties of aluminum alloy matrix composites reinforced with Zr and Ni trialumnides synthesized by in situ reaction10.1007/s11661-019-05511-7 ↗
78. High-temperature mechanical properties and fracture mechanisms of Al–Si piston alloy reinforced with in situ TiB2 particles10.1016/j.msea.2015.03.021 ↗
79. In–situ synthesis of an Al composite reinforced with multi–scale Al12Mo, (Al, Zr, Si) and Al2O3 particles through a multi–stage reaction10.1016/j.msea.2019.138069 ↗
80. High-temperature mechanical properties of 2024 Al matrix nanocomposite reinforced by TiC network architecture10.1016/j.msea.2019.138121 ↗
81. Synthesis of an Al–based composite reinforced by multi–phase ZrB2, Al3BC and Al2O3 with good mechanical and thermal properties at elevated temperature10.3390/ma13184048 ↗