Corrosion behaviour of friction stir processed, metastable, dual-phase, Fe49.5Mn30Co10Cr10C0.5, multi-principal element alloy
Source abstract
Abstract
The corrosion behaviour of Friction Stir Processed (FSPed), dual-phase, Multi-Principal Element Alloy (MPEA), Fe 49.5Mn 30Co 10Cr 10C 0.5, was investigated. The microstructure of the alloy in the annealed condition consisted of Face Cantered Cubic (FCC) and Hexagonal Closed Pack (HCP) phases, with the HCP phase present as laminates inside the equiaxed FCC grain. Fine carbide particles were found to be precipitated at the grain boundaries and also inside the grains. FSP engendered a reduction in the grain size due to dynamic recrystallization and an increase in the fraction of strain-induced HCP phase in the microstructure. The potentiodynamic polarisation and Electrochemical Impedance Spectroscopy (EIS) studies showed that the one-pass FSPed sample exhibited best corrosion resistance compared to the annealed and two-pass FSPed samples. The reason for this was ascribed to two factors: the reduced grain size and the smaller fraction of the HCP phase induced by strain in the microstructure. Mott-Schottky results indicated the presence of n- type semiconducting passive layer on the surface of annealed and FSPed samples. The one-pass sample had the lowest defect density (N D value) compared to annealed and the two-pass FSPed sample. Scanning Electron Microscopy (SEM) studies performed on the annealed, one-pass and two-pass samples, after immersion in 3.5 wt% NaCl solution, revealed the presence of large number of pits and corrosion products in the annealed sample compared to that in the FSPed samples. Results obtained from X-ray Photoelectron Spectroscopy (XPS) studies confirmed the presence of iron oxide, chromium oxide, cobalt oxide, chromium & cobalt hydroxides as the major constituents, together with a low concentration of manganese, in the passive layer formed on the FSPed samples.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Effect of grain boundary engineering on corrosion behavior of nickel-based alloy 825 in sulfur environment10.1088/2053-1591/ac0cc5 ↗
2. An electrochemical impedance spectroscopic study of the passive state on AISI 304 stainless steel
3. Enhancement of the resistance to localized corrosion of type 304 borated stainless steels through hot rolling10.1016/j.corsci.2021.109798 ↗
4. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
5. High-temperature materials for structural applications: new perspectives on high-entropy alloys, bulk metallic glasses, and nanomaterials10.1557/mrs.2019.257 ↗
6. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
7. The corrosion behavior of ultra-fine grained CoNiFeCrMn high-entropy alloys10.1016/j.jallcom.2019.152583 ↗
8. Influence of plastic deformation on the corrosion behavior of CrCoFeMnNi high entropy alloy
9. Study of the surface oxides and corrosion behaviour of an equiatomic CoCrFeMnNi high entropy alloy by XPS and ToF-SIMS10.1016/j.corsci.2020.108507 ↗
10. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
11. Strong and ductile non-equiatomic high-entropy alloys: design, processing, microstructure, and mechanical properties10.1007/s11837-017-2540-2 ↗
12. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
13. Comparative corrosion behavior of Fe50Mn30Co10Cr10 dual-phase high-entropy alloy and CoCrFeMnNi high-entropy alloy in 3.5 wt% NaCl solution10.1016/j.jallcom.2020.155824 ↗
14. Corrosion behavior and passive film characterization of Fe 50 Mn 30 Co 10 Cr 10 dual-phase high-entropy alloy in sulfuric acid solution10.1149/1945-7111/ab8de4 ↗
15. Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys
16. The effect of tempering treatment on the corrosion resistance of hardened 13% chromium steels
17. Effect of multipass friction stir processing on mechanical and corrosion behavior of 2507 super duplex stainless steel10.1007/s11665-016-2470-0 ↗
18. A review of friction stir processing of structural metallic materials: process, properties, and methods10.3390/met10060772 ↗
19. Friction-stir processing of AISI 440C high-carbon martensitic stainless steel for improving hardness and corrosion resistance10.1016/j.jmatprotec.2019.116448 ↗
20. Influence of friction stir surface processing on the corrosion resistance of Al 606110.3390/ma15228124 ↗
21. Applying multi-pass friction stir processing to refine the microstructure and enhance the strength, ductility and corrosion resistance of WE43 magnesium alloy10.1016/j.jmrt.2021.03.021 ↗
22. An investigation of the microstructural effects on the mechanical and electrochemical properties of a friction stir processed equiatomic CrMnFeCoNi high entropy alloy10.1016/j.jmst.2021.01.043 ↗
23. Corrosion-resistant high entropy alloy with high strength and ductility10.1016/j.scriptamat.2019.03.028 ↗
24. Friction stir welding of a TRIP Fe49Mn3Crr10Co10C1 high entropy alloy
25. Effect of multipass friction stir processing on corrosion resistance of hypereutectic Al – 30Si alloy10.1016/j.corsci.2014.02.013 ↗
26. Corrosion and corrosion inhibition by thiourea of bulk nanocrystallized industrial pure iron in dilute HCl solution10.1016/j.corsci.2005.06.005 ↗
27. Mechanism of pit nucleation by electrical breakdown of the passive film10.1016/S0010-938X(01)00113-5 ↗
28. Effect of the reinforced boron carbide particulate content of AA6061 alloy on formation of the passive film in seawater10.1016/j.corsci.2011.04.023 ↗
29. Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution10.1016/j.corsci.2018.02.031 ↗
30. Electronic properties of the passive films formed on CoCrFeNi and CoCrFeNiAl high entropy alloys in sodium chloride solution10.1016/j.jmrt.2020.10.002 ↗
31. Formation of smooth anodic nanoporous iron oxide film for enhancing photocathodic protection on plain carbon steel10.1016/j.surfcoat.2022.128724 ↗
32. Electronic structure of anodic oxide films formed on cobalt by cyclic voltammetry10.1016/j.corsci.2005.10.007 ↗
33. Friction stir processing of a high entropy alloy Fe 42 Co 10 Cr 15 Mn 28 Si 5 with transformative characteristics: microstructure and mechanical properties
34. Effect of multi-pass friction stir processing on microstructure and mechanical properties of a metastable dual-phase high entropy alloy10.3390/lubricants11010002 ↗
35. Effects of the phase content on dynamic damage evolution in Fe50Mn30Co10Cr10 high entropy alloy10.1016/j.jallcom.2020.156883 ↗
36. Improving mechanical properties and corrosion resistance of 0. 5 wt% C TRIP steel by adjusting retained austenite stability and microstructural constituents10.1016/j.msea.2022.143737 ↗
37. Effect of residual stress and microstructure on corrosion resistance of carburised 18CrNiMo7-6 steel10.1108/ACMM-02-2020-2260 ↗
38. Effects of plastic straining on the corrosion resistance of TRIP-aided lean duplex stainless steels10.1007/s10853-018-2196-5 ↗