Enabling high dielectric constant and low loss tangent in BaTiO3–epoxy composites through a 3D interconnected network structure of ceramic phase
Source abstract
Abstract
Constructing ceramic–polymer composites with a 3–3 connectivity is an effective strategy to achieve a notable increase in the dielectric constant at low ceramic contents. However, the dielectric data of the 3–3 composites with a low ceramic content (<10 vol. %) are still limited, and further investigation is thus required. Herein, composites with a 3–3 connectivity, in which BaTiO 3 (BTO) and epoxy are self-connected in three dimensions, were developed and constructed at low BTO contents (2.0–8.3 vol. %). A three-dimensional network structure of the BTO ceramic (3D-BTO) was constructed via the sacrificial template method using polyurethane foam as the template. The dielectric constant and loss tangent of the composites increased with increasing BTO content. At a BTO content of 8.3 vol. %, the dielectric constant of the composite considerably increased to 33.4 at 1 kHz, which was ∼10-fold higher than that of neat epoxy (3.5). The loss tangent had a low value of< 0.030. By comparing with several theoretical models, the dielectric constants of the composites were well fitted with the effective medium theory model at low fitting factors ( n = 0.008–0.013). The considerable increase in the dielectric constant of the composites with a low loss tangent at a low BTO content was attributed to the strong interfacial polarization and continuous polarization pathways through the interconnected 3D-BTO network structure in the composites. This study fills the gap in the literature by providing missing data on the dielectric properties of 3–3 composites at low ceramic contents (<10 vol. %), as well as a theoretical prediction.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Ferroelectric and Piezoelectric Materials · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Polymer-/ceramic-based dielectric composites for energy storage and conversion10.1002/eem2.12237 ↗
2. Polymer-based dielectrics with high permittivity for electric energy storage: a review10.1016/j.nanoen.2021.106438 ↗
3. Embedded capacitors in printed wiring board: a technological review10.1007/s11664-012-2044-3 ↗
4. Polymer–ceramic composites of 0–3 connectivity for circuits in electronics: a review10.1111/j.1744-7402.2009.02482.x ↗
5. A comprehensive review on dielectric composites: classification of dielectric composites
6. Recent developments in BaTiO3 based lead-free materials for energy storage applications10.1016/j.jallcom.2022.167066 ↗
7. BaTiO3–epoxy composites for electronic applications10.1111/j.1744-7402.2009.02473.x ↗
8. Recent development on modification of synthesized barium titanate (BaTiO3) and polymer/BaTiO3 dielectric composites
9. Dielectric behaviours of multi-doped BaTiO3/epoxy composites10.1016/S0955-2219(00)00327-7 ↗
10. Study on epoxy/BaTiO3 composite embedded capacitor films (ECFs) for organic substrate applications10.1016/j.mseb.2004.01.022 ↗
11. Comparison of theoretical predictions and experimental values of the dielectric constant of epoxy/BaTiO3 composite embedded capacitor films10.1007/s10853-005-6454-y ↗
12. Dielectric properties of polymer/ceramic composites based on thermosetting polymers10.1007/s00289-007-0840-3 ↗
13. Dielectric response and relaxation phenomena in composites of epoxy resin with BaTiO3 particles10.1016/j.compositesa.2005.01.026 ↗
14. Dielectric properties of epoxy resin–barium titanate composites at high frequency10.1016/j.matlet.2006.05.061 ↗
15. A systematic study on electrical properties of the BaTiO3–epoxy composite with different sized BaTiO3 as fillers10.1016/j.jallcom.2014.09.142 ↗
16. Effect of silane as coupling agent on the dielectric properties of BaTiO3-epoxy composites10.1016/j.compositesa.2007.04.003 ↗
17. BaTiO3–epoxy composites for electronic applications10.1111/j.1744-7402.2009.02473.x ↗
18. Study on microstructure and dielectric property of the BaTiO3/epoxy resin composites10.1016/j.compscitech.2007.05.021 ↗
19. Preparation and dielectric properties of BaTiO3/epoxy nanocomposites for embedded capacitor application10.1016/j.compscitech.2014.04.012 ↗
20. Enhancement of polarization property of silane-modified BaTiO3 nanoparticles and its effect in increasing dielectric property of epoxy/BaTiO3 nanocomposites
21. The role of epoxy matrix occlusions within BaTiO3 nanoparticles on the dielectric properties of functionalized BaTiO3/epoxy nanocomposites
22. Polyaniline stabilized barium titanate nanoparticles reinforced epoxy nanocomposites with high dielectric permittivity and reduced flammability10.1039/c3tc30129j ↗
23. Preparation and dielectric properties of PATP-coated nano-BaTiO3/epoxy resin composites10.1016/j.ceramint.2015.03.121 ↗
24. Role of interface in highly filled epoxy/BaTiO3 nanocomposites. part i-correlation between nanoparticle surface chemistry and nanocomposite dielectric property10.1109/TDEI.2013.004165 ↗
25. Dielectric characterization of epoxy nanocomposite with barium titanate fillers10.1049/iet-nde.2019.0037 ↗
26. A rational design of core-shell-satellite structured BaTiO3 fillers for epoxy-based composites with enhanced microwave dielectric constant and low loss10.1016/j.compositesb.2021.108764 ↗
27. Enhanced dielectric permittivity of BaTiO3/epoxy resincomposites by particle alignment10.1016/j.ceramint.2016.01.103 ↗
28. Significantly enhanced permittivity and energy density in dielectric composites with aligned BaTiO3 lamellar structures10.1039/C9TA11360F ↗
29. Construction of a 3D-BaTiO3 network leading to significantly enhanced dielectric permittivity and energy storage density of polymer composites10.1039/C6EE03190K ↗
30. X. M. 74, Obtaining greatly improved dielectric constant in BaTiO3–epoxy composites with low ceramic volume fraction by enhancing the connectivity of ceramic phase10.1021/acsami.1c25069 ↗
31. Unique pure barium titanate foams with three-dimensional interconnecting pore channels and their high-k cyanate ester resin composites at very low barium titanate loading10.1039/C6TC03772K ↗
32. Dielectric properties and discharge energy density of epoxy composites with 3D BaTiO3 network structure10.1016/j.matlet.2020.127695 ↗
33. Enhanced dielectric constant and energy density in a BaTiO3/polymer-matrix composite sponge, Commun
34. Significantly enhanced dielectric permittivity and low loss in epoxy composites incorporating 3D W-WO3/ BaTiO3 foams10.1007/s10853-020-05536-z ↗
35. Construction of a three-dimensional BaTiO3 network for enhanced permittivity and energy storage of PVDF composites10.3390/ma14133585 ↗
36. Study on effect of cubic- and tetragonal phased BaTiO3 on the electrical and thermal properties of polymeric nanocomposites10.1016/j.matchemphys.2016.08.052 ↗
37. Effect of dehydroxylation of hydrothermal barium titanate on dielectric properties in polystyrene composite10.1002/app.22890 ↗
38. Synthesis of BaTiO3 nanoparticles as shape modified filler for high dielectric constant ceramic–polymer composite10.1039/D0RA04196C ↗
39. Dielectric relaxations investigation of a synthesized epoxy resin polymer
40. Curing behaviors of cyanate ester/epoxy copolymers and their dielectric properties10.1177/0954008316672291 ↗
41. Epoxy-based/BaTiO3 nanodielectrics: relaxation dynamics, charge transport and energy storage10.1016/j.materresbull.2021.111537 ↗
42. Fundamentals, processes and applications of high-permittivity polymer−matrix composites10.1016/j.pmatsci.2011.08.001 ↗
43. Theoretical evidence for lichtenecker’s mixture formulae’ based on the effective medium theory10.1088/0022-3727/31/13/013 ↗
44. Dielectric constant for binary piezoelectric 0–3
45. Effective dielectric properties of composite materials: The dependence on the particle size distribution10.1103/PhysRevB.64.064205 ↗
46. A precise numerical prediction of effective dielectric constant for polymer–ceramic composite based on effective-medium theory10.1109/6144.888853 ↗