journal article·2023-06

Microstructure and mechanical properties of as casted Al-Si-Sc-Ce alloys prepared by molten salt electrolysis with varied cooling rate

Xuan Liu, Hao Guo, Jilai Xue, Zengjie Wang, Yanan Zhang, Xiang Li

Publisher page

Abstract

Al-7Si-0.8Sc-0.6Ce alloys were prepared with combined addition of low-cost Ce and high-priced Sc through molten salt electrolysis with controlled cooling process. The phases of as-casted alloys consisted of α-Al, eutectic silicon, ternary AlSi 2Sc 2 and CeAl 2Si 2. Rapid cooling transformed the huge hollow ternary AlSi 2Sc 2 blocks (300–500 µm) into fine Al 3Sc particles (dozens of μm), and simultaneously refined the AlSi 2Sc 2 with reducing its interlayer thickness from 15.26 µm down to 1.94 µm (the cooling rate from 0.05 K s −1 up to 30 K s −1 ). The eutectic Si became fine fibrous-like clusters and the thickness of CeAl 2Si 2 phase reduced by 62.6 % when the cooling rate reached 30 K s −1. Micro-hardness measurement and first principles-based calculation were applied for evaluating the individual mechanical performance of each phase in the alloy. The calculated Young’s modulus (E) suggests that Al 3Sc (E = 168 GPa), AlSi 2Sc 2 (E = 178 GPa) and CeAl 2Si 2 (E = 39.2 GPa) can toughen Al-matrix (E = 30.6 GPa). The rapid cooling (30 K s −1) strongly enhances all phase components but diminish the huge hollow AlSi 2Sc 2 blocks (ultrahigh micro-Vickers hardness ∼ 780 HV), making a homogenous Al-RE alloy with improved mechanical property (68 ∼ 84 HV balanced among phase components). The refining mechanisms on the improved mechanical performance are also discussed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Application of cast Al–Si alloys in internal combustion engine components10.1179/1743280413Y.0000000027 ↗
2. Hydrogen trapping and embrittlement in high-strength Al alloys10.1038/s41586-021-04343-z ↗
3. Dorin · 2018 · 439
4. Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends
5. Effects of rare earth elements addition on microstructures, tensile properties and fractography of A357 alloy10.1016/j.msea.2014.01.009 ↗
6. Effects of rare earth Er additions on microstructure development and mechanical properties of die-cast ADC12 aluminum alloy10.1016/j.jallcom.2012.05.089 ↗
7. The scandium effect in multicomponent alloys10.1080/09506608.2015.1137692 ↗
8. Understanding of strengthening and toughening mechanisms for Sc-modified Al-Si-(Mg) series casting alloys designed by computational thermodynamics10.1016/j.jallcom.2019.07.069 ↗
9. Segregation behaviors of Sc and unique primary Al3Sc in Al-Sc alloys prepared by molten salt electrolysis10.1016/j.jmst.2019.02.002 ↗
10. The effect of scandium addition on microstructure and mechanical properties of Al–Si–Mg alloy: a multi-refinement modifier10.1016/j.matchar.2015.10.030 ↗
11. Complex precipitation pathways in multicomponent alloys10.1038/nmat1652 ↗
12. Comparison of microstructure and mechanical properties of Al-Mg-Li-Sc-Zr alloys processed by ingot metallurgy and rapid solidification10.1016/j.jallcom.2021.160937 ↗
13. Recrystallization behavior of Al-Mg-Mn-Sc-Zr alloy based on two different deformation ways10.1016/j.matlet.2020.127455 ↗
14. Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing10.1016/j.actamat.2020.07.014 ↗
15. Effects of Sc or/and Ge addition on microstructure and mechanical properties of as-cast 6016 Al alloy10.1016/j.jallcom.2019.151829 ↗
16. Optimizing strength and ductility of Al–7Si–0.4 Mg foundry alloy: role of Cu and Sc addition10.1016/j.jallcom.2019.151944 ↗
17. Microstructure and properties of Al-M-Sc alloy prepared by cathode Al-Liquid electrolysis
18. Beneficial effects of Sc/Zr addition on hypereutectic Al–Ce alloys: modification of primary phases and precipitation hardening10.1016/j.msea.2022.142611 ↗
19. Comparing evolution of precipitates and strength upon aging of cast and laser-remelted Al-8Ce-0.2Sc-0.1Zr (wt%)10.1016/j.msea.2022.142990 ↗
20. Effect of Zr and Sc micro-additions on the microstructure and mechanical properties of as-cast Al-5Ce alloy10.1016/j.msea.2021.141654 ↗
21. Cast near-eutectic Al-12.5 wt% Ce alloy with high coarsening and creep resistance10.1016/j.msea.2019.138440 ↗
22. Effect of Scandium on Mechanical Properties of Al-6.5Zn-2.3Mg-2.0Cu-0.2Ce-0.1Zr Alloy
23. Microstructure evolution and performances of Al-0.7Mg-0.6Si-0.2Ce-X (X Sc, Y and Zr) alloys with high strength and high electrical conductivity10.1016/j.jallcom.2021.162654 ↗
24. Microstructure and properties of novel Al-Ce-Sc, Al-Ce-Y, Al-Ce-Zr and Al-Ce-Sc-Y alloy conductors processed by die casting, hot extrusion and cold drawing10.1016/j.jmst.2020.03.073 ↗
25. Microstructure and mechanical properties of cast Al-Ce-Sc-Zr-(Er) alloys strengthened by Al11Ce3 micro-platelets and L12 Al3(Sc,Zr,Er) nano-precipitates10.1016/j.actamat.2022.118354 ↗
26. Stability and stoichiometry of Ll2Al3 (Sc, Zr) dispersoids in Al-(Si)-Sc-Zr alloys10.1016/j.actamat.2021.117117 ↗
27. Mechanical properties evaluation of Zr addition in L12-Al3(Sc1-xZrx) using first-principles calculation10.1007/s11837-016-1880-7 ↗
28. Fabrication of Al-Si-Sc alloy bearing AlSi2Sc2 phase using ultrasonically assisted molten salt electrolysis10.1016/j.jallcom.2019.05.133 ↗
29. AlSi2Sc2 intermetallic formation in Al-7Si-0.3Mg-xSc alloys and their effects on as-cast properties10.1016/j.jallcom.2017.10.125 ↗
30. The role of the bimodal distribution of ultra-fine silicon phase and nano-scale V-phase (AlSi2Sc2) on spark plasma sintered hypereutectic Al-Si-Sc alloys10.1016/j.msea.2016.01.069 ↗
31. Ultrasonic refining mechanism of ternary phase in Al–Sc based alloys prepared through molten salt electrolysis
32. Influence of the interaction between Si and Sc on the microstructure and tensile properties of as casted Al-Si-Sc alloys10.1016/j.jallcom.2022.167650 ↗
33. Cerium in aluminum alloys10.1007/s10853-019-03892-z ↗
34. Comparing evolution of precipitates and strength upon aging of cast and laser-remelted Al–8Ce-0.2Sc-0.1Zr (wt%)10.1016/j.msea.2022.142990 ↗
35. Cast near-eutectic Al-12.5 wt% Ce alloy with high coarsening and creep resistance10.1016/j.msea.2019.138440 ↗
36. Microstructure evolution and performances of Al-0.7Mg-0.6Si-0.2Ce-X (X]Sc, Y and Zr) alloys with high strength and high electrical conductivity
37. Modification of Al-Si Alloys by Ce or Ce with Sr10.1007/s11837-018-3192-6 ↗
38. High performance aluminum–cerium alloys for high-temperature applications10.1039/C7MH00391A ↗
39. Thermodynamic aspects of the constitution, grain refining, and solidification enthalpies of Al-Ce-Si alloys10.1007/s11661-004-0172-y ↗
40. Phase boundary anisotropy and its effects on the maze-to-lamellar transition in a directionally solidified Al- Al2Cu eutectic10.1016/j.actamat.2019.03.035 ↗
41. Interplay between cooling rate, microstructure, and mechanical properties ofan Al–Ce–Ni–Mn alloy
42. Effect of cooling rate on microstructure and mechanical properties of AA5056 Al-Mg alloy
43. Effects of cooling rate on casting ternary Al–Cu-Sc alloy prepared by ultrasound-assisted molten salt electrolysis10.1016/j.msea.2019.138657 ↗
44. Microstructures and mechanical properties of the Al–Cu–Sc alloys prepared by ultrasound-assisted molten salt electrolysis10.1016/j.jallcom.2019.152870 ↗
45. Cathodic reduction process of Al–Cu–Y alloy in fluoride-oxide eutectic system via molten salt electrolysis10.1016/j.jre.2017.09.013 ↗
46. Effects of ultrasound on the microstructure of Al-7Si-Sc alloy prepared via molten salt electrolysis
47. Electrochemical production of Al-Sc alloy in CaCl2-Sc2O3 molten salt10.1016/j.jallcom.2008.06.110 ↗
48. First-principles study on the structures and elastic properties of W-Ta-V ternary alloys10.1016/j.commatsci.2021.110940 ↗
49. Soft self-consistent pseudopotentials in a generalized eigenvalue formalism10.1103/PhysRevB.41.7892 ↗
50. General methods for geometry and wave function optimization10.1021/j100203a036 ↗
51. The Al−Sc (Aluminum-Scandium) system10.1007/BF02881486 ↗
52. Phase equilibria and solidification characteristics of the Al–Sc–Si alloys10.1007/s10853-015-9487-x ↗
53. Thermodynamic description of the quaternary Al-Si-Mg-Sc system and its application to the design of novel Sc-additional A356 alloys10.1016/j.matdes.2016.12.034 ↗
54. Multiscale characterization of the nucleation and 3D structure of Al3Sc phases using electron microscopy and synchrotron X-ray tomography10.1016/j.matchar.2020.110353 ↗
55. Dendritic and seaweed growth of proeutectic scandium tri-aluminide in hypereutectic Al-Sc undercooled melt10.1016/j.actamat.2020.08.078 ↗
56. Effect of local texture and residual stress on the bendability of extruded 6000-series Al alloy profiles10.1016/j.msea.2021.142167 ↗
57. Effect of cooling rate on eutectic Si in Al-7.0Si-0.3Mg alloys modified by La additions10.1016/j.jallcom.2020.154206 ↗
58. The systems Ce–Al–(Si, Ge): phase equilibria and physical properties10.1006/jssc.1997.7660 ↗
59. Thermodynamic, elastic and electronic properties of AlSc2Si210.1016/j.matlet.2014.10.006 ↗
60. Thermodynamic description of Al-Si-Mg-Ce quaternary system in Al-rich corner and its experimental validation10.1007/s11669-017-0607-y ↗
61. Peritectic reaction on the Al-rich side of Al–Cr system10.1016/j.jallcom.2014.09.174 ↗
62. Solute distribution at the solid-liquid interface during steady-state peritectic solidification10.1007/BF00540464 ↗
63. Study on the primary Al3Sc phase and the structure heredity of Al-Zn-Mg-Cu-Sc-Zr alloy10.1016/j.matchar.2020.110601 ↗
64. Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys10.1016/S1359-6454(01)00116-1 ↗
65. Insight into Si poisoning on grain refinement of Al-Si/Al-5Ti-B system10.1016/j.actamat.2020.01.039 ↗
66. A mechanism for the poisoning effect of silicon on the grain refinement of Al-Si alloys10.1016/j.actamat.2006.09.046 ↗