Temperature rise in shear bands and its effect on crystallization behavior in bulk metallic glasses
Source abstract
Abstract
Since the operation of shear band in bulk metallic glasses (BMGs) is accompanied by severe localization in both size and time scales, the measurement of heating and temperature of shear band is extremely difficult. In this paper, temperature rise in the shear bands and its effect on crystallization behavior are investigated in experimental and analytical ways. The released elastic energy, the thickness of shear band and the elapsed time for the energy transfer into the shear band are the key parameters in determining the temperature profile inside and around shear bands. By using the glass transition temperature ( T g ) and liquidus temperature ( T liq ) in the analytical model, it is possible to determine the shape and the size of hot and liquid zones. It is found that, the size of hot zone is equal to the stable crack growth region and also the size of liquid zone is equal to the vein pattern size on the fracture surface. Since the heating and cooling rates in a hot shear band are extremely high, crystallization cannot appear within the shear band, but is likely to occur around it. In a cold shear band, the heating and cooling in the supercooled liquid region occurs slowly, which is suitable for nucleation and growth of the crystalline phase inside the shear band. However, the crystalline phase appears only on the compressive side of the specimen. These findings provide a new insight for better understanding the deformation behavior of bulk metallic glasses through an analytical method.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Material Dynamics and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (82)
Show source-provided references
1. Damage-tolerant Zr-Cu-Al-based bulk metallic glasses with record-breaking fracture toughness10.1557/jmr.2014.160 ↗
2. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
3. Fracture in metallic glasses: mechanics and mechanisms10.1007/s10704-015-9995-3 ↗
4. Shear banding stability and fracture of metallic glass: effect of external confinement10.1016/j.jmps.2020.103922 ↗
5. Challenges in optimizing the resistance to corrosion and wear of amorphous Fe-Cr-Nb-B alloy containing crystalline phases
6. Effects of crystallization on mechanical behavior and corrosion performance of a ductile Zr68Al8Ni8Cu16 bulk metallic glass10.1016/j.jnoncrysol.2019.119782 ↗
7. Metallic glasses as structural materials10.1016/j.scriptamat.2005.09.051 ↗
8. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
9. Activation energy of shear transformation zones: a key for understanding rheology10.1103/PhysRevLett.97.195501 ↗
10. Rejuvenation of metallic glasses by non-affine thermal strain10.1038/nature14674 ↗
11. Transition from stress-driven to thermally activated stress relaxation in metallic glasses10.1103/PhysRevB.94.104203 ↗
12. The activation energy and volume of flow units of metallic glasses10.1016/j.scriptamat.2012.03.009 ↗
13. On the source of plastic flow in metallic glasses: Concepts and models10.1016/j.intermet.2015.08.004 ↗
14. On the origin of intermediate temperature brittleness in La-based bulk metallic glasses10.1016/j.jallcom.2018.08.131 ↗
15. Temperature dependence of serrated flow, strain-rate sensitivity and activation volume in a Ti-based bulk metallic glass10.1016/j.jnoncrysol.2020.120497 ↗
16. An instability index of shear band for plasticity in metallic glasses10.1016/j.actamat.2008.11.018 ↗
17. Temperature rise at shear bands in metallic glasses10.1038/nmat1536 ↗
18. Dynamics of viscoplastic deformation in amorphous solids10.1103/PhysRevE.57.7192 ↗
19. On the origin of shear banding instability in metallic glasses10.1016/j.jmps.2009.04.008 ↗
20. Tensile properties of ZrCu-based bulk metallic glasses at ambient and cryogenic temperatures10.1016/j.jnoncrysol.2011.04.017 ↗
21. Localized shear deformation and softening of bulk metallic glass: stress or temperature driven?10.1038/srep02798 ↗
22. Cold versus hot shear banding in bulk metallic glass
23. Shear bands in metallic glasses are not necessarily hot10.1063/1.4895605 ↗
24. How hot is a shear band in a metallic glass?10.1016/j.msea.2015.10.125 ↗
25. Temperature rises during strain-rate dependent avalanches in bulk metallic glasses10.1016/j.intermet.2019.106637 ↗
26. Nanocrystallization during Nanoindentation of A Bulk Amorphous Metal Alloy at Room Temperature10.1126/science.1067453 ↗
27. Thermographic studies of temperature evolutions in bulk metallic glasses: an overview10.1016/j.intermet.2012.03.022 ↗
28. Time-resolved measurement of shear-band temperature during serrated flow in a Zr-based metallic glass10.1016/j.actamat.2016.05.008 ↗
29. Viscous flow in sliding shear band formed during tensile deformation of hypoeutectic Zr-based metallic glass10.1016/j.intermet.2011.06.017 ↗
30. Probing heat generation during tensile plastic deformation of a bulk metallic glass at cryogenic temperature10.1038/s41598-018-34681-4 ↗
31. On temperature rise within the shear bands in bulk metallic glasses10.1007/s12540-018-0072-0 ↗
32. Shear bands in metallic glasses: size effects on thermal profiles10.1016/j.actamat.2011.01.022 ↗
33. Shear band melting and serrated flow in metallic glasses10.1063/1.2956666 ↗
34. Capturing shear band propagation in a Zr-based metallic glass using a high-speed camera10.1016/j.scriptamat.2010.02.017 ↗
35. Avalanche statistics from data with low time resolution10.1103/PhysRevE.94.052135 ↗
36. Thickness of shear bands in metallic glasses
37. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
38. Shear-band dynamics in metallic glasses10.1002/adfm.201404223 ↗
39. Effect of temperature on the fracture surface morphology of Ti- and Zr-based bulk metallic glasses: exploring correlation between morphology and plasticity10.1007/s10853-018-2284-6 ↗
40. Softening and dilatation in a single shear band10.1016/j.actamat.2011.04.047 ↗
41. Flow serration and shear-band viscosity during inhomogeneous deformation of a Zr-based bulk metallic glass10.1016/j.intermet.2009.03.005 ↗
42. A. Inoue, Stabilization of metallic supercooled liquid, 48.10.1016/S1359-6454(99)00300-6 ↗
43. Deformation-induced nanocrystal formation in shear bands of amorphous alloys10.1038/367541a0 ↗
44. Crystallization during bending of a Pd-based metallic glass detected by x-ray microscopy10.1103/PhysRevLett.109.085501 ↗
45. Effect of strain rate on the formation of nanocrystallites in an Al-based amorphous alloy during nanoindentation10.1063/1.1571234 ↗
46. On the origin of nanocrystals in the shear band in a quasicrystal forming bulk metallic glass Ti 40 Zr 29 Cu 9 Ni 8 Be 1410.1016/j.scriptamat.2006.05.037 ↗
47. Enhanced mechanical properties in a Zr-based metallic glass caused by deformation-induced nanocrystallization10.1016/j.scriptamat.2009.09.014 ↗
48. Origin of pressure-induced crystallization of Ce75Al25 metallic glass10.1038/ncomms7493 ↗
49. Extraordinary plasticity of ductile bulk metallic glasses10.1103/PhysRevLett.96.245502 ↗
50. Localized crystallization in shear bands of a metallic glass
51. Characterization of deformation-induced structural change of Pd78Cu6Si16 metallic glass using a micro-sized cantilever-beam specimen10.1016/j.scriptamat.2009.11.029 ↗
52. Self-organized intermittent plastic flow in bulk metallic glasses10.1016/j.actamat.2009.08.040 ↗
53. Serrated flow and stick-slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass10.1016/j.actamat.2012.04.013 ↗
54. On the effect of shear and local deformation in three-point bending tests10.1016/j.polymertesting.2007.06.002 ↗
55. Gere · 2009
56. Plasticity of ductile metallic glasses: A self-organized critical state10.1103/PhysRevLett.105.035501 ↗
57. Serrated flow during inhomogeneous bending deformation of bulk metallic glasses: From self-organized critical to chaotic dynamics10.1016/j.jnoncrysol.2018.10.038 ↗
58. Shear band spacing under bending of Zr-based metallic glass plates10.1016/j.actamat.2004.01.034 ↗
59. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
60. Carslaw · 1959
61. Zr-(Cu,Ag)-Al bulk metallic glasses10.1016/j.actamat.2007.12.030 ↗
62. Fracture of brittle metallic glasses: Brittleness or plasticity10.1103/PhysRevLett.94.125510 ↗
63. Miannay · 1998
64. Nanoscale periodic morphologies on the fracture surface of brittle metallic glasses10.1103/PhysRevLett.98.235501 ↗
65. Outer medium effects and fracture nucleation sites in model experiments to mimic fracture surface features of metallic glasses10.1016/j.msea.2012.01.040 ↗
66. Model experiments to mimic fracture surface features in metallic glasses10.1016/j.msea.2009.10.072 ↗
67. The fracture of bulk metallic glasses10.1016/j.pmatsci.2015.05.002 ↗
68. R.D. Conner, W.L. Johnson, N.E. Paton et al., Shear bands and cracking of metallic glass plates in bending Shear bands and cracking of metallic glass plates in bending, 94, 2003, pp. 904–911.10.1063/1.1582555 ↗
69. Beating crystallization in glass-forming metals by millisecond heating and processing
70. J. Schroers, A. Masuhr, W.L. Johnson et al. Pronounced asymmetry in the crystallization behavior during constant heating and cooling of a bulk metallic glass-forming liquid, 60, 1999, pp. 855–858.10.1103/PhysRevB.60.11855 ↗
71. Isothermal crystallization kinetics of an industrial-grade Zr-based bulk metallic glass10.1016/j.jnoncrysol.2021.121145 ↗
72. Effect of Nb minor addition on the crystallization kinetics of Zr-Cu-Al-Ni metallic glass10.1016/j.jnoncrysol.2021.120731 ↗
73. Effect of the strain rate on the intermediate temperature brittleness in Zr-based bulk metallic glasses10.1016/j.jnoncrysol.2017.09.001 ↗
74. Intermediate temperature brittleness in metallic glasses
75. Influence of sub-Tg annealing on microstructure and crystallization behavior of TiZr-based bulk metallic glass10.1016/j.jnoncrysol.2021.120855 ↗
76. Influence of annealing on structural relaxation, crystallization, and deformation behavior of a Zr41.2Ti13.8 Cu12.5Ni10Be22.5 bulk metallic glass10.1557/jmr.2007.0253 ↗
77. Effects of partial crystallization in Pt-Si-B-based bulk metallic glasses on glass transition and crystallization of the remaining amorphous matrix10.1016/j.jnoncrysol.2017.01.025 ↗
78. Pressure effect on crystallization of mechanically alloyed amorphous Al85Fe15 alloy10.1016/S0921-5093(99)00598-5 ↗
79. The effect of compression and tension on shear-band structure and nanocrystallization in amorphous Al90Fe5Gd5: a high-resolution transmission electron microscopy study10.1016/S1359-6454(03)00229-5 ↗
80. Mechanically-assisted nanocrystallization and defects in amorphous alloys: A high-resolution transmission electron microscopy study10.1016/j.scriptamat.2005.09.052 ↗
81. Review on the research and development of Ti-based bulk metallic glasses10.3390/met6110264 ↗
82. A universal criterion for plastic yielding of metallic glasses with a (T/Tg)2/3 temperature dependence10.1103/PhysRevLett.95.195501 ↗