Unified upper temperature for cryogenic thermal cycling treatment in Fe-based bulk metallic glasses
Source abstract
Abstract
Fe-based bulk metallic glasses have high fracture strength and large elastic limit. However, the extremely poor plasticity at room temperature severely renders their wide use as structural materials. In this work, three Fe-based bulk metallic glasses were selected to explore the effect of the upper temperature for cryogenic thermal cycling treatment on the plasticity of the specimens after rejuvenation. It was found that all three Fe-based bulk metallic glasses exhibit the largest plasticity when the upper temperature is about 0.62 Tg, where Tg is glass transition temperature. The underlying mechanism is understood by the evolution of the structural heterogeneity dominates by the competition between structural rejuvenation and physical aging during the CTC treatment. When the upper temperature is relatively low, the structural rejuvenation dominates, which causes an increase of the plasticity of bulk metallic glasses; Otherwise, a too high upper temperature leads to a physical aging, resulting in the decline of plasticity. This work will provide process reference for the cryogenic thermal cycling treatment of Fe-based bulk metallic glasses.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties10.1016/j.pmatsci.2020.100709 ↗
2. Design and characterization of self-lubricating refractory high entropy alloy-based multilayered films10.1021/acsami.1c16949 ↗
3. Facile route to bulk ultrafine-grain steels for high strength and ductility10.1038/s41586-021-03246-3 ↗
4. Design and characterization of metallic glass/graphene multilayer with excellent nanowear properties10.1007/s40544-021-0581-6 ↗
5. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications10.1016/j.pmatsci.2019.01.003 ↗
6. Strain-hardening and suppression of shear-banding in rejuvenated bulk metallic glass10.1038/s41586-020-2016-3 ↗
7. Varying the treating conditions to rejuvenate metallic glass by deep cryogenic cycling treatment
8. Effect of deep cryogenic cycling treatment on the microstructure and mechanical properties of Ti-based bulk metallic glass10.1016/j.jallcom.2021.161386 ↗
9. Rejuvenation of metallic glasses by non-affine thermal strain10.1038/nature14674 ↗
10. Enhancement of plasticity for FeCoBSiNb bulk metallic glass with superhigh strength through cryogenic thermal cycling10.1016/j.scriptamat.2020.05.059 ↗
11. Enhancement of plasticity by cryogenic thermal cycling on Fe80P13C7 bulk amorphous alloy10.1016/j.matlet.2021.130195 ↗
12. Formation of ferromagnetic bulk amorphous Fe40Ni40P14B6 alloys10.1016/j.matlet.2006.02.054 ↗
13. Origin of nondetectable x-ray diffraction peaks in nanocomposite CuTiZr alloys10.1063/1.1619220 ↗
14. Fe-based bulk metallic glass with unprecedented plasticity at room temperature10.1016/j.intermet.2021.107377 ↗
15. Ductility improvement of amorphous steels: roles of shear modulus and electronic structure10.1016/j.actamat.2007.09.011 ↗
16. Synthesis of iron-based bulk metallic glasses as nonferromagnetic amorphous steel alloys10.1063/1.1599636 ↗
17. Correlation between enthalpy change and free volume reduction during structural relaxation of Zr55Cu30Al10Ni5 metallic glass10.1016/j.scriptamat.2003.09.038 ↗
18. Ductile to brittle transition of fracture of a Zr-based bulk metallic glass: Strain rate effect10.1016/j.intermet.2016.07.004 ↗
19. Creation and annihilation of free volume during homogeneous flow of a metallic glass10.1063/1.1827344 ↗
20. Origin of stress overshoot in amorphous solids10.1016/j.mechmat.2014.10.002 ↗
21. Effects of structure relaxation and surface oxidation on nanoscopic wear behaviors of metallic glass10.1016/j.actamat.2022.117934 ↗
22. Correlations between the relaxed excess free volume and the plasticity in Zr-based bulk metallic glasses10.1016/j.jallcom.2009.02.075 ↗
23. Mechanical properties and structural features of novel Fe-based bulk metallic glasses with unprecedented plasticity10.1038/srep06233 ↗
24. Flow unit perspective on room temperature homogeneous plastic deformation in metallic glasses10.1103/PhysRevLett.113.045501 ↗
25. Atomistic free-volume zones and inelastic deformation of metallic glasses10.1038/nmat2802 ↗
26. Structural heterogeneities and mechanical behavior of amorphous alloys10.1016/j.pmatsci.2019.04.005 ↗
27. Minor Cr alloyed Fe–Co–Ni–P–B high entropy bulk metallic glass with excellent mechanical properties10.1016/j.msea.2020.140542 ↗
28. Nucleation of shear bands in amorphous alloys10.1073/pnas.1321518111 ↗
29. Testing effects on hardness of a Zr-based metallic glass under nanoindentation10.1016/j.scriptamat.2017.05.046 ↗
30. Substantially enhanced plasticity of bulk metallic glasses by densifying local atomic packing10.1038/s41467-021-26858-9 ↗
31. Shear bands in metallic glasses10.1016/j.mser.2013.04.001 ↗
32. Atomic-scale icosahedral short-range ordering in a rejuvenated Zr-based bulk metallic glass upon deep cryogenic treatment10.1016/j.msea.2022.143565 ↗
33. Dynamic relaxations and relaxation-property relationships in metallic glasses10.1016/j.pmatsci.2019.03.006 ↗
34. Unusual fast secondary relaxation in metallic glass10.1038/ncomms8876 ↗
35. Improving plasticity of the Zr46Cu46Al8 bulk metallic glass via thermal rejuvenation10.1016/j.scib.2018.04.021 ↗