Cage-like MnSe@PPyC/rGO as superior dual anode materials in Li/Na-ions storage
Source abstract
Abstract
Along with high reversible capacity, superior cycling and rate performances, transition metal-based materials have been considered as promising dual anode materials for lithium/sodium ion storage. However, one of the greatest challenges during the selenization process is that the as-prepared transition metal selenides with designed morphology could retain the original morphology of transition metal oxides well. To address this key issue, in this work, a cage-like MnSe@PPyC/rGO composite is successfully developed by one-step selenization/carbonization treatment with in- situ formed polypyrrole coated MnO 2 nanorods and graphene oxide as precursors, which effectively preserve the original rod-like morphology and endow a conductive network. The morphology control process, composition and microstructural change have been systematically characterized with SEM, EDS, TEM, TGA, BET, XRD, and XPS. Benefited from the above composition and structure, cage-like MnSe@PPyC/rGO exhibits good rate performance (310.3 mAh/g at 3.2 A/g) and high reversible lithium storage capacity (776.9 mAh/g at 0.1 A/g after rate testing). As anode materials for SIBs, the composite demonstrates high capacity of 546.6 mAh/g at 0.2 A/g as well as outstanding rate capability and cycle stability (294.4 mAh/g after 455 cycles at 2 A/g and 194.5 mAh/g after 2000 cycles at 10 A/g). The finding provides a new avenue for the study of transition metal/carbon composites with special morphology as dual anode materials for Li/Na-ions storage.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Facile premixed flame synthesis C@Fe2O3/SWCNT as superior free-standing anode for lithium-ion batteries10.1016/j.jallcom.2022.164247 ↗
2. Dual anode materials for lithium- and sodium-ion batteries10.1039/C8TA00107C ↗
3. In-situ plantation of Fe3O4@C nanoparticles on reduced graphene oxide nanosheet as high-performance anode for Lithium/Sodium-ion batteries10.1016/j.apsusc.2021.149163 ↗
4. Highly monodispersed graphene/SnO2 hybrid nanosheets as bifunctional anode materials of Li-ion and Na-ion batteries10.1016/j.jallcom.2019.153506 ↗
5. Application of different carbon-based transition metal oxide composite materials in lithium-ion batteries10.1016/j.jelechem.2021.115652 ↗
6. Nanostructured conversion-type anode materials for advanced lithium-ion batteries10.1016/j.chempr.2018.01.003 ↗
7. Manganese selenide: synthetic aspects and applications10.1016/j.jallcom.2020.155800 ↗
8. Urchin-like MnO/C microspheres as high-performance lithium-ion battery anode10.1007/s11581-021-03921-5 ↗
9. Graphene intercalated free-standing carbon paper coated with MnO2 for anode materials of lithium ion batteries10.1016/j.electacta.2020.136310 ↗
10. Manganese oxide as an effective electrode material for energy storage: a review
11. Controlled thermal oxidation derived Mn3O4 encapsulated in nitrogen doped carbon as an anode for lithium/sodium ion batteries with enhanced performance10.1016/j.cej.2020.126894 ↗
12. Improved cycling performance of the micro-cubes like NiO-Co3O4-MnCo2O4 material as competent and durable anode material for energy storage and conversion in Li-ion batteries10.1007/s11581-021-04155-1 ↗
13. Manganese ferrite (MnFe2O4) nanoparticles: from synthesis to application-a review10.1016/j.jiec.2021.07.043 ↗
14. A facile ex situ strategy of α-MnS nanoparticles anchored on holey graphene as high-performance anode for lithium-ion batteries10.1016/j.apsusc.2020.148496 ↗
15. MnSe nanoparticles encapsulated into N-doped carbon fibers with a binder-free and free-standing structure for lithium ion batteries10.1016/j.ceramint.2020.08.267 ↗
16. Construction of MnSe2/CoSe2/reduced graphene oxide composites with enhanced electrochemical performance as the battery-like electrode for hybrid supercapacitors10.1016/j.jallcom.2021.158751 ↗
17. MnSe/ZnSe encapsulated in N-doped carbon electrospinning nanofibers for high-performance lithium ion batteries10.1016/j.matlet.2020.127945 ↗
18. MOF-derived α-MnSe/C composites as anode materials for Li-ion batteries10.1016/j.ceramint.2019.08.093 ↗
19. Embedding α-MnSe nanodots in nitrogen-doped electrospinning carbon nanofibers to enhanced storage properties of lithium-ion batteries10.1016/j.jallcom.2019.05.107 ↗
20. MnSe2 nanocubes as an anode material for sodium-ion batteries10.1016/j.mtener.2018.08.009 ↗
21. Synthesis of high-quality α-MnSe nanostructures with superior lithium storage properties10.1021/acs.inorgchem.5b02558 ↗
22. MnSe embedded in carbon nanofibers as advanced anode material for sodium-ion batteries
23. Hexagonal prism structured MnSe stabilized by nitrogen-doped carbon for high performance lithium ion batteries10.1016/j.jallcom.2019.03.081 ↗
24. Facile fabrication of flower-like MnO2 hollow microspheres as high-performance catalysts for toluene oxidation
25. S.J. Zhu, W.L. Cen, L.L. Hao, J.J. Ma, L. Yu, H.L. Zheng, Y.X. Zhang, Flower-like MnO2 decorated activated multihole carbon as high-performance asymmetric supercapacitor electrodes, Mater. Lett. 135 (2014) 11–14.10.1016/j.matlet.2014.07.120 ↗
26. Facile synthesis of nanostructured MnO2 as anode materials for sodium-ion batteries
27. MnO2 nanotubes with a water soluble binder as high performance sodium storage materials10.1039/C6RA20706E ↗
28. Flower-, wire-, and sheet-like MnO2-deposited diatomites: Highly efficient absorbents for the removal of Cr(VI)10.1016/j.jes.2014.06.047 ↗
29. Coaxial α-MnSe@ N-doped carbon double nanotubes as superior anode materials in Li/Na-ion half/full batteries10.1039/C8TA03967D ↗
30. Ni3Se4@ CoSe2 hetero-nanocrystals encapsulated into CNT-porous carbon interpenetrating frameworks for high-performance sodium ion battery10.1016/j.jcis.2021.11.175 ↗
31. Super Na+ half/full batteries and ultrafast Na+ diffusion kinetics of cobalt-nickel selenide from assembling Co0.5Ni0.5Se2@NC nanosheets into cross-stacked architecture10.1002/cjoc.202100192 ↗
32. SbPS4: a novel anode for high-performance sodium-ion batteries10.1016/j.cclet.2021.06.065 ↗
33. Flexible quasi-solid-state sodium-ion full battery with ultralong cycle life, high energy density and high-rate capability10.1007/s12274-021-3577-7 ↗
34. Polypyrrole-modified carbon nanotubes@manganese dioxide@sulfur composite for lithium–sulfur batteries10.1007/s11581-019-02847-3 ↗
35. Shell structure control of PPy-modified CuO composite nanoleaves for lithium batteries with improved cyclic performance10.1021/sc500755d ↗
36. In situ TEM study of lithiation into a PPy coated α-MnO2/graphene foam freestanding electrode10.1039/C8QM00153G ↗
37. Preparation of PPy-coated MnO2 hybrid micromaterials and their improved cyclic performance as anode for lithium-ion batteries10.1186/s11671-017-2286-3 ↗
38. Highly efficient Na+ storage in uniform thorn ball-like a-MnSe/C nanospheres10.1007/s40195-021-01200-w ↗
39. Facile synthesis of manganese selenide anchored in three-dimensional carbon nanosheet matrix with enhanced lithium storage properties
40. The in-situ synthesis of a 3D SnS/N-doped graphene composite with enhanced electrochemical performance as a low-cost anode material in sodium ion batteries10.3390/ma12122030 ↗
41. Mesoporous MnO2 hollow spheres for enhanced catalytic oxidation of formaldehyde
42. Layered manganese oxides-decorated and nickel foam-supported carbon nanotubes as advanced binder-free supercapacitor electrodes10.1016/j.jpowsour.2014.07.031 ↗
43. Characterization of manganese oxide octahedral molecular sieve (M-OMS-2) materials with different metal cation dopants10.1021/cm000868o ↗
44. N-doped carbon nanofibers encapsulated Cu2-xSe with the improved lithium storage performance and its structural evolution analysis10.1016/j.electacta.2020.137449 ↗
45. The effect of manganese vacancy in birnessite-type MnO2 on room-temperature oxidation of formaldehyde in air10.1016/j.apcatb.2016.11.036 ↗
46. Catalytic oxidation of formaldehyde over manganese oxides with different crystal structures10.1039/C4CY01461H ↗
47. Preparation and electrochemical properties of α-MnO2/rGO-PPy composite as cathode material for zinc-ion battery10.1007/s10853-021-06266-6 ↗
48. Embedding MnO@Mn3O4 nanoparticles in an N-doped-carbon framework derived from Mn-organic clusters for efficient lithium storage10.1002/adma.201704244 ↗
49. Long cycle life and high rate capability of three dimensional CoSe2 grain-attached carbon nanofibers for flexible sodium-ion batteries10.1016/j.nanoen.2019.01.062 ↗
50. Multifunctional Ni/NiO hybrid nanomembranes as anode materials for high-rate Li-ion batteries10.1016/j.nanoen.2014.06.022 ↗
51. A synergistic effect of Na+ and Al3+ dual doping on electrochemical performance and structural stability of LiNi0.88Co0.08Mn0.04O2 cathodes for Li-ion batteries10.1021/acsami.1c16042 ↗