Abnormally fast crack propagation induced by short-range ordering in iron-cobalt alloys: A combined experiments and molecular dynamics simulations
Source abstract
Abstract
We experimentally found that FeCo 21.5Cr 0.2Ni 0.8 alloy quenched from 500 °C, slightly above the order-disorder transition temperature, surprisingly exhibited an extreme impact brittleness. Impact fracture morphology observed by scanning electron microscope (SEM) showed that the impact brittleness was caused by the fast crack growth and poor local plasticity. Short-range ordered (SRO) structures were found in the sample quenched from 500 °C by high-resolution transmission electron microscope (HRTEM) characterizations, and the average SRO size is ~1.58 nm. We contribute the impact brittleness to the formation of SROs. Molecular dynamics (MD) simulations were carried out to reveal the SRO-induced embrittlement mechanism caused by fast crack propagation under high-speed loading. MD simulations showed SROs significantly inhibited the deformation plasticity near crack tips by suppressing the dislocation proliferation, dislocation slip, and twinning. Generalized stacking fault energy (GSFE) curves were calculated to evaluate the effect of SROs on antiphase boundary (APB) energies, unstable stacking energy γ usf, and intrinsic stacking energy γ isf. SROs were found to prominently increase the APB energies and γ isf γ usf , fully supporting the SRO-induced poor dislocation and twinning plasticity near crack tips in MD simulations. These findings revealed the potential SRO-induced impact brittleness and its embrittlement mechanism, and provide a design consideration for the engineering application of materials under impact loading.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Simultaneously enhancing the ultimate strength and ductility of high-entropy alloys via short-range ordering10.1038/s41467-021-25264-5 ↗
2. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
3. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
4. Effect of Ta content on stacking fault energy and microstructure characteristics of (VCoNi)100-XTaX (X = 0, 0.05, 0.5 and 1) medium entropy alloy10.1016/j.matlet.2021.130770 ↗
5. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
6. Chemical medium-range order in a medium-entropy alloy10.1038/s41467-022-28687-w ↗
7. B32 order in iron rich Fe-Al alloys10.1016/1359-6462(96)00311-9 ↗
8. Short-range order in α-FeAl soft magnetic alloy10.1134/S106378341809010X ↗
9. Short-range order in Fe-21.9 at % Al10.3139/146.101248 ↗
10. An X-ray diffraction study of the short-range ordering in the soft-magnetic Fe–Si alloys with induced magnetic anisotropy10.1016/j.physb.2007.04.008 ↗
11. Specific features of the local atomic structure of a Fe-Si alloy in the α area of the phase diagram10.1134/S1063783409060250 ↗
12. Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi10.1016/j.actamat.2020.08.044 ↗
13. Yield strength and misfit volumes of NiCoCr and implications for short-range-order10.1038/s41467-020-16083-1 ↗
14. Short-range ordering governs brittleness and ductility in W-Ta solid solution: Insights from Pugh's shear-to-bulk modulus ratio10.1016/j.scriptamat.2021.114136 ↗
15. Influence of long-range order upon strain hardening10.1080/14786436508218872 ↗
16. Relationship between flow stress and atomic order in the FeCo alloy10.1080/14786436408225388 ↗
17. Soft magnetic FeCo alloys: alloy development, processing, and properties10.1179/174328005X14339 ↗
18. Near equiatomic FeCo alloys: Constitution, mechanical and magnetic properties10.1016/j.pmatsci.2005.04.001 ↗
19. The effect of atomic order on the mechanical properties of alloys with emphasis on FeCo
20. Physical and mechanical metallurgy of Ni3Al and its alloys10.1179/imr.1989.34.1.153 ↗
21. Abnormal TRIP effect on the work hardening behavior of a quenching and partitioning steel at high strain rate10.1016/j.actamat.2020.02.035 ↗
22. Shock-induced plasticity in nanocrystalline iron: Large-scale molecular dynamics simulations10.1103/PhysRevB.102.020102 ↗
23. Microscopic view of structural phase transitions induced by shock waves10.1126/science.1070375 ↗
24. Atomistic simulations of shock-induced transformations and their orientation dependence in bcc Fe single crystals10.1103/PhysRevB.72.064120 ↗
25. Interactions of plasticity and phase transformation under shock in iron bicrystals10.1063/1.5080227 ↗
26. Shock waves in polycrystalline iron10.1103/PhysRevLett.98.135701 ↗
27. Polycrystalline iron under compression: plasticity and phase transitions10.1103/PhysRevB.86.144111 ↗
28. Shock waves in polycrystalline iron: plasticity and phase transitions10.1103/PhysRevB.89.140102 ↗
29. Joint investigation of strain partitioning and chemical partitioning in ferrite-containing TRIP-assisted steels10.1016/j.actamat.2019.12.050 ↗
30. Dislocation nucleation from a crack tip: an analysis based on the Peierls concept10.1016/S0022-5096(05)80012-2 ↗
31. High-throughput approach for estimation of intrinsic barriers in FCC structures for alloy design10.1016/j.scriptamat.2021.114126 ↗
32. Impact of the B2 ordering behavior on the mechanical properties of a FeCoMo alloy10.1016/j.msea.2016.03.083 ↗
33. Atomsk: A tool for manipulating and converting atomic data files10.1016/j.cpc.2015.07.012 ↗
34. Atomistic deformation behavior of single and twin crystalline Cu nanopillars with preexisting dislocations10.1016/j.actamat.2020.07.029 ↗
35. Atomistic insights into metal hardening10.1038/s41563-020-00815-1 ↗
36. Misfit-energy-increasing dislocations in vapor-deposited CoFe/NiFe multilayers10.1103/PhysRevB.69.144113 ↗
37. Improved ductility by coupled motion of grain boundaries in nanocrystalline B2-FeCo alloys10.1016/j.commatsci.2021.110703 ↗
38. Ab-initio calculation of the γ-surface and cleavage energy in the B2 FeCo intermetallic compound10.1016/j.commatsci.2017.11.050 ↗
39. First-principles study on the P-induced embrittlement and de-embrittling effect of B and C in ferritic steels10.1016/j.actamat.2021.117260 ↗
40. Hydrogen embrittlement of grain boundaries in nickel: an atomistic study10.1038/s41524-017-0031-1 ↗
41. Embrittlement of interfaces by solute segregation10.1016/0921-5093(89)90372-9 ↗
42. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
43. Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool10.1088/0965-0393/18/1/015012 ↗
44. Structure and magnetism in bcc-based iron-cobalt alloys10.1103/PhysRevB.73.224208 ↗
45. Ordered structure and solute-suppressed atomic ordering in iron-cobalt alloys10.1016/j.commatsci.2021.111005 ↗
46. Studies of crack growth and propagation of single-crystal nickel by molecular dynamics10.1016/j.commatsci.2015.02.031 ↗
47. Effects of hydrogen on the deformation mechanism of face-centred cubic Fe–C single crystal with nanovoid: a molecular dynamics simulation10.1016/j.jallcom.2021.159330 ↗
48. Chemically complex intermetallic alloys: a new frontier for innovative structural materials
49. Y. Pachaury, A. El-Azab, J.P. Wharry, Molecular Dynamics Simulation of Vacancy and Void Effects on Strain-Induced Martensitic Transformations in an FeNi Alloy, Social Science Electronic Publishing.
50. Energy landscape of deformation twinning in bcc and fcc metals10.1103/PhysRevB.71.224102 ↗
51. Intrinsic stacking faults in body-centred cubic crystals10.1080/14786436808227500 ↗
52. Bending-induced deformation twinning in body-centered cubic tungsten nanowires10.1080/21663831.2019.1578833 ↗
53. In situ atomic-scale observation of twinning-dominated deformation in nanoscale body-centred cubic tungsten10.1038/nmat4228 ↗
54. Unstable twin in body-centered cubic tungsten nanocrystals10.1038/s41467-020-16349-8 ↗
55. Brittle crack propagation resistance inside grain and at high angle grain boundary in 3 % Si-Fe alloy10.1016/j.actamat.2017.11.020 ↗
56. The role of deformation twins in brittle crack propagation in iron–silicon steel10.1016/j.actamat.2009.02.011 ↗
57. Dislocation activity and nano-void formation near crack tips in nanocrystalline Ni10.1016/j.actamat.2005.02.012 ↗
58. Atomic elastic stiffness analysis to predict twinning in Fe single crystal under shear10.1016/j.commatsci.2020.109804 ↗
59. A. Zs, S.A. Tan, B. Hs, J.C. Li, W.D. Lu, S.E. Miao, F. Zl, W.A. Sheng, A. Cl, Radiation-assisted chemical short-range order formation in high-entropy alloys.
60. A first-principles measure for the twinnability of FCC metals10.1016/j.jmps.2004.05.002 ↗
61. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
62. Competition between slip and twinning in face-centered cubic metals10.1063/1.4898319 ↗