journal article·2022-11

The interfacial ionic transport of two-dimensional ZnAl-mixed metal oxides nanocomposite

Liwen Huang, Xin Chen, Yan Wu

Publisher page

Abstract

Exploring environmentally friendly electrolyte materials with high ionic conductivity is regarded as a critical challenge for developing low temperature solid oxide fuel cells (LTSOFC). In this study, the two-dimensional ZnAl-mixed metal oxides (ZnAl-MMO) nanocomposite was derived from ZnAl-layered double hydroxide. The obtained ZnAl-MMO nanocomposite is provided with high concentration of oxygen vacancies at the surface, which achieved a high ionic conductivity of 0.26 S cm − 1 and the maximum power density of 860 mW cm − 2 at 550 °C. Significant improvement of open circuit voltage to 1.16 V is testified that the in-situ grown Zn 6Al 2O 9 can effectively inhibit electron long-range transmission among ZnO. In addition, the unique proton transport at the interface of ZnAl-MMO heterostructure was proposed. This work presents an approach to develop environmental-friendly two-dimensional mixed metal oxides for the application of renewable energy conversion.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Advanced Battery Materials and Technologies · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage10.1039/C8EE01419A ↗
2. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
3. A SOFC based on a co-ionic electrolyte10.1016/j.jpowsour.2003.10.016 ↗
4. Advanced perovskite anodes for solid oxide fuel cells: A review10.1016/j.ijhydene.2019.09.220 ↗
5. Chemical and thermomechanical compatibility between Ni–GDC anode and electrolytes based on ceria10.1016/j.ceramint.2008.03.004 ↗
6. High-performance SOFC cathodes prepared by infiltration10.1002/adma.200802428 ↗
7. Enhanced long-term stability of bismuth oxide-based electrolytes for operation at 500 °C10.1007/s11581-009-0402-9 ↗
8. GDC-Y2O3 oxide based two phase nanocomposite10.1115/1.4003634 ↗
9. Novel core-shell SDC/amorphous Na2CO3 nanocomposite electroilte for low-temperature SOFCs10.1016/j.elecom.2008.08.023 ↗
10. Novel materials for solid oxide fuel cell technologies: A literature review10.1016/j.ijhydene.2017.08.105 ↗
11. Shaping triple-conducting semiconductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ into an electrolyte for low-temperature solid oxide fuel cells10.1038/s41467-019-09532-z ↗
12. Recent advances in material and performance aspects of solid oxide fuel cells10.1016/j.jelechem.2019.113315 ↗
13. Electrochemical mechanisms of an advanced low-temperature fuel cell with a SrTiO3 electrolyte10.1039/C9TA00499H ↗
14. Schottky junction effect on high performance fuel cells based on nanocomposite materials10.1002/aenm.201401895 ↗
15. Synthesis of magnetic ZnO/ZnFe2O4 by a microwave combustion method, and its high rate of adsorption of methylene blue10.1016/j.jcis.2014.10.009 ↗
16. Doped ZnO nanoparticles impregnated on Kaolinite (Clay): A reusable nanocomposite for photocatalytic disinfection of multidrug resistant Enterobacter sp. under visible light10.1016/j.jcis.2018.07.020 ↗
17. Hierarchical NiCo-LDH core/shell homostructural electrodes with MOF-derived shell for electrochemical energy storage10.1016/j.jcis.2022.03.056 ↗
18. Y2O3 functionalized natural palygorskite as an adsorbent for methyl blue removal10.1039/C6RA04350J ↗
19. Kaolinite stabilized paraffin composite phase change materials for thermal energy storage10.1016/j.clay.2015.07.033 ↗
20. Proton conduction and fuel cell Using the CuFe-oxide mineral composite based on CuFeO2 structure10.1021/acsaem.7b00137 ↗
21. Natural hematite for next-generation solid oxide fuel cells10.1002/adfm.201503756 ↗
22. Green synthesis of faujasite-La0.6Sr0.4Co0.2Fe0.8O3-δ mineral nanocomposite membrane for low temperature advanced fuel cells10.1016/j.ijhydene.2020.05.275 ↗
23. Layered double hydroxide photocatalysts for solar fuel production10.1016/S1872-2067(21)63861-5 ↗
24. Engineering heterogeneous semiconductors for solar water splitting10.1039/C4TA04461D ↗
25. 3D yolk@shell TiO2−x/LDH architecture: tailored structure for visible light CO2 conversion10.1021/acsami.8b17232 ↗
26. Core-shell structured ZnO@Cu-Zn–Al layered double hydroxides with enhanced photocatalytic efficiency for CO2 reduction10.1016/j.catcom.2016.01.019 ↗
27. Electro-derived Cu-Cu2O nanocluster from LDH for stable and selective C2 hydrocarbons production from CO2 electrochemical reduction10.1016/j.jechem.2019.12.013 ↗
28. Memory effect of the CuZnAl-LDH derived catalyst precursor-In situ XRD studies10.1016/j.apcata.2013.05.048 ↗
29. Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets10.1021/cr200434v ↗
30. ZnCr layered double hydroxide (LDH) nanosheets assisted formation of hierarchical flower-lke CdZnS@LDH microstructures with improved visible-lght-driven H2 production10.1002/asia.201403387 ↗
31. High-capacity adsorption of benzotriazole from aqueous solution by calcined Zn-Al layered double hydroxides10.1016/j.colsurfa.2018.01.009 ↗
32. High adsorption selectivity of ZnAl layered double hydroxides and the calcined materials toward phosphate10.1016/j.jcis.2009.11.004 ↗
33. Proton Shuttles in CeO2/CeO2-δ Core-Shell Structure10.1021/acsenergylett.9b01829 ↗
34. Electrical conductivity in the ZrO2-Rich region of several M2O3-ZrO2 systems10.1111/j.1151-2916.1965.tb14742.x ↗
35. Superior perovskite oxide-ion conductor; strontium- and magnesium-doped LaGaO3: I, phase relationships and electrical properties10.1111/j.1151-2916.1998.tb02662.x ↗
36. Ba(Zr0.1Ce0.7Y0.2)O3–δ as an electrolyte for low-temperature solid-oxide fuel cells10.1002/adma.200601366 ↗
37. Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2−xYbxO3-δ10.1126/science.1174811 ↗
38. Surface-engineered homostructure for enhancing proton transport
39. Semiconductor heterostructure SrTiO3/CeO2 electrolyte membrane fuel cells
40. Performance analysis of LiAl0.5Co0.5O2 nanosheets for intermediate-temperature fuel cells10.1016/j.ijhydene.2021.05.108 ↗
41. Investigation of the sudden drop of electrolyte conductivity at low temperature in ceramic fuel cell with Ni0.8Co0.15Al0.05LiO2 electrode10.1016/j.ijhydene.2021.06.017 ↗
42. Water-n-BuOH solvothermal synthesis of ZnAl-LDHs with different morphologies and its calcined product in efficient dyes removal10.1016/j.jcis.2017.01.079 ↗
43. Adsorption of fluoride ions by Zn–Al layered double hydroxides10.1016/j.clay.2007.07.004 ↗
44. Investigation of layered Ni0.8Co0.15Al0.05LiO2 in electrode for low-temperature solid oxide fuel cells10.1016/j.ijhydene.2017.11.056 ↗
45. Review on the improvement of the photocatalytic and antibacterial activities of ZnO10.1016/j.jallcom.2017.08.142 ↗
46. XPS investigation of titanium contact formation to ZnO nanowires10.1088/1361-6528/aa5663 ↗
47. Li effects on layer-structured oxide LixNi0.8Co0.15Al0.05O2-δ: improving cell performance via on-line reaction10.1016/j.electacta.2018.10.160 ↗
48. Quantitative investigation of plasmonic hot-electron injection by KPFM10.1016/j.apsusc.2019.06.109 ↗