journal article·2022-09

Effect of equal-channel angular pressing on structural evolution, phase transformations and mechanical properties of Al-4Ca-0.8Mn-1.3Fe-0.1Zr-0.1Sc hypoeutectic alloy

S.O. Rogachev, E.A. Naumova, A.V. Doroshenko, R.D. Karelin, V.S. Komarov, V.S. Yusupov, N.Yu. Tabachkova, V.A. Andreev, V.M. Khatkevich

Publisher page

Abstract

The effect of equal-channel angular pressing on structural phase transformations and mechanical properties of the as-cast hypoeutectic Al–4Ca–1.3Fe–0.8Mn–0.1Zr–0.1Sc alloy has been studied. ECAP was carried out under isothermal conditions at a temperature of 200 °C, with a channel intersection angle of 110º, using the B C route and the number of passes N = 6. After ECAP, a substructure with an increased dislocation density has developed in the alloy. ECAP led, firstly, to the evolution of the dendritic structure (dendrites elongate and merge with each other), and secondly, to the refinement of the Al 4Ca, Al 4Ca(Fe) and Al 3−x (Fe, Mn) eutectic phase particles to nano- and submicron scale, their mixing and partial segregation of calcium. The tensile tests of the ECAP processed alloy showed that its strength increased, while its ductility decreased. The yield point increased from 122 to 257 MPa, the ultimate tensile strength increased from 174 to 281–314 MPa, and the relative elongation decreased from 6 to 1–3%. After ECAP, the strength is higher, and the relative elongation is lower for longitudinal specimens compared to transverse specimens.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Kaufman · 2004
2. Glazoff · 2007
3. Selective laser melting of aluminum-alumina powder composites obtained by hydrothermal oxidation method10.1007/s00339-020-04029-9 ↗
4. Design of multicomponent aluminium alloy containing 2 wt% Ca and 0.1 wt% Sc for cast products10.1016/j.jallcom.2018.05.281 ↗
5. Remarkable thermal stability of the Al-Ca-Ni-Mn alloy manufactured by laser-powder bed fusion10.1016/j.matlet.2020.129074 ↗
6. Microstructure and phase composition of the eutectic Al – Ca alloy, additionally alloyed with small additives of zirconium, scandium and manganese10.17580/nfm.2017.02.09 ↗
7. Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties10.1007/s11661-000-0011-8 ↗
8. Significance of grain refinement on microstructure and mechanical properties of an Al-3% Mg alloy processed by high-pressure torsion10.1016/j.jallcom.2016.06.194 ↗
9. Microstructure and mechanical properties of 7005 aluminum alloy processed by room temperature ECAP and subsequent annealing10.1016/j.jallcom.2016.01.022 ↗
10. Evolution of microstructure and texture in a ultrafine-grained Al6082 alloy during severe plastic deformation10.1016/j.msea.2008.01.049 ↗
11. Structure and mechanical properties of Al-Ca alloys processed by severe plastic deformation10.1016/j.msea.2019.138410 ↗
12. Effect of severe plastic deformations on structure features and mechanical behavior of Al4Ca intermetallic in Al-18% Ca alloy10.1016/j.jallcom.2020.157117 ↗
13. Plastic flow, structure and mechanical properties in pure Al deformed by twist extrusion10.1016/j.msea.2009.06.005 ↗
14. Effect of ECAP temperature on microstructure and mechanical properties of Al–Zn–Mg–Cu alloy10.1016/j.pnsc.2016.03.003 ↗
15. Ultrafine-grained aluminium alloys: processes, structural features and properties
16. Damage and strengthening mechanisms in severely deformed commercially pure aluminum: Experiments and modeling10.1016/j.msea.2020.140224 ↗
17. Effect of ECAP on microstructure and mechanical properties of a commercial 6061 Al alloy produced by powder metallurgy10.1016/S0925-8388(03)00008-2 ↗
18. Microstructure, strength and fatigue of an ultrafine-grained Al-Cu-Mg alloy
19. Continuous processing of ultrafine grained Al by ECAP-Conform10.1016/j.msea.2004.04.021 ↗
20. Towards enhancement of properties of UFG metals and alloys by grain boundary engineering using SPD processing
21. Valiev · 2014
22. Microstructure evolution and aging kinetics of Al–Mg–Si and Al–Mg–Si–Sc alloys processed by ECAP10.4028/www.scientific.net/MSF.503-504.493 ↗
23. Properties and deformation behaviour of severe plastic deformed aluminium alloys10.1016/j.jmatprotec.2006.07.038 ↗
24. Structure and mechanical properties of Al–Ca–Mn–Fe–Zr–Sc eutectic aluminum alloy after warm equal channel angular pressing10.3103/S1067821221030123 ↗
25. Effect of iron on the structure, hardening and physical properties of the alloys of the Al-Zn-Mg-Ca system10.17580/tsm.2018.05.10 ↗
26. Zolotorevsky · 2005
27. An innovative route for valorising iron and aluminium oxide rich industrial wastes: Recovery of multiple metals10.1016/j.jenvman.2021.113035 ↗
28. Wetting of grain boundary triple junctions by intermetallic deltaphase in the Cu–In alloys10.1007/s10853-020-05674-4 ↗
29. Instabilities of interfaces between dissimilar metals induced by high pressure torsion10.1016/j.matlet.2018.03.200 ↗
30. High Pressure Torsion: from Laminar Flow to Turbulence10.1088/1757-899X/194/1/012045 ↗
31. Mixing instabilities during shearing of metals10.1038/s41467-017-01879-5 ↗
32. Features of structure formation in layered metallic materials processed by high pressure torsion10.1007/s11661-020-05654-y ↗
33. Fabrication of hybrid metal systems through the application of high-pressure torsion10.1088/1757-899X/194/1/012002 ↗
34. Understanding the role of Ca segregation on thermal stability, electrical resistivity and mechanical strength of nanostructured aluminum10.1016/j.msea.2020.140108 ↗
35. Study of magnetized sliding contact nickel/stainless steel10.1016/S0167-8922(00)80134-0 ↗