journal article·2022-04

Effect of melt superheating treatment on corrosion resistance of Al2CoCrCuFeNi high entropy alloy in 0.5 M HNO3 solution

Jing Guo, Xiangfeng Xing, Xiaorong Zhang, Lingfeng Xu, Xiao Cui, Yuepeng Song, Yuan Xu

Publisher page

Abstract

Al 2CoCrCuFeNi high-entropy alloy (HEA) was heated by vacuum arc furnace at different powers (5.26kW, 6.15 kW, 7.28 kW, 8.26 kW) to different temperatures above the liquidus point (labeled as T 1, T 2, T 3 and T 4 ). The structure and corrosion resistance were investigated by means of X-ray diffraction, scanning electron microscopy with spectroscopy (SEM/EDS), transmission electron microscopy (TEM), and electrochemical workstation. It was found that the HEAs with different superheating temperatures were all simple face-centered cubic (FCC) and body-centered cubic (BCC) solid solutions without complex phases. As the superheating temperature increased, the structure of HEAs became dense, the segregation decreased, and some fine-scale precipitations were formed at T 4. When the heating temperature reached T 3 or higher, the corrosion current density of the alloy decreased by more than 1/2, and the range of the passivation zone also became wider, indicating that the corrosion resistance was significantly improved. It was found that the pitting potential E b ranked: T 1 <T 2 <T 4 <T 3, indicating that the alloys labeled as T 3 and T 4 had better pitting resistance than those labeled as T 1 and T 2. The potential range of the stable passivation region △ E ranked: T 1 <T 2 <T 3 <T 4, which proved that the passivation film on the surface of HEA became more and more stable as the superheating temperature increased.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Interstitial carbide synergistically strengthening high-entropy alloy CoCrFeNiV0.5Cx10.1016/j.msea.2020.139802 ↗
2. Microstructure and corrosion properties of Al2CrFeCoxCuNiTi high entropy alloys prepared by additive manufacturing10.1016/j.jallcom.2021.161422 ↗
3. Investigation on microstructures and properties of Al1.5CoCrFeMnNi high entropy alloy coating before and after ultrasonic impact treatment10.1016/j.jallcom.2021.160989 ↗
4. Effect of melt superheat treatment on solidification behavior and microstructure of new Ni–Co based superalloy10.1016/j.jmrt.2021.10.122 ↗
5. Influence of melt overheating treatment on solidification behavior of BiTe-based alloys at different cooling rates10.1016/j.matdes.2015.09.074 ↗
6. Influence of melt superheat treatment on corrosion resistance of Gd-based BMG in 3.5% NaCl solution10.1016/j.matdes.2016.03.146 ↗
7. Effect of heat treatment on microstructure and corrosion behavior of Mg-5Al-1Zn-1Sn magnesium alloy10.1016/j.corsci.2021.109759 ↗
8. Review—Electrochemical noise applied in corrosion science: theoretical and mathematical models towards quantitative analysis10.1149/1945-7111/ab8de3 ↗
9. Microstructure and corrosion of non-equimolar multi-principal element alloys hardened by metastable precipitates
10. Observation of anomalous discontinous liquid structure change with temperature10.1103/PhysRevLett.89.125505 ↗
11. Influence of fine-scale B2 precipitation on dynamic compression and wear properties in hypo-eutectic Al0.5CoCrFeNi high-entropy alloy10.1016/j.jallcom.2020.157126 ↗
12. Effects of re-solution and re-aging treatment on mechanical property, corrosion resistance and electrochemical behavior of 2196 Al-Cu-Li alloy10.1016/j.matdes.2021.109662 ↗
13. Influence of remelting and annealing treatment on corrosion resistance of AlFeNiCoCuCr high entropy alloy in 3.5% NaCl solution10.1016/j.jallcom.2018.10.081 ↗
14. Oxygen impurity improving corrosion resistance of a Zr-based bulk metallic glass in 3.5 wt% NaCl solution10.1016/j.corsci.2021.109867 ↗
15. Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating10.1016/j.apsusc.2016.11.176 ↗
16. Combating marine corrosion on engineered oxide surface by repelling, blocking and capturing Cl−: a mini review10.1016/j.corcom.2021.09.001 ↗
17. Effects of electromagnetic pulse treatment on spinodal decomposed microstructure, mechanical and corrosion properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2021.161676 ↗