Yttrium for the selective laser melting of Ti-45Al-8Nb intermetallic: Powder surface structure, laser absorptivity, and printability
Source abstract
Abstract
Abstract High Nb-TiAl alloys are important materials to realize critical, light-weight parts of high-temperature applications. It has been challenging, however, to realize their laser-based additive manufacturing (AM) due to the materials’ high crack sensitivity. To mitigate the cracking problem particularly relating to oxygen, this study is designed to investigate the impact of introduced rare earth element (Y) on the microstructure, surface chemistry, and laser absorptivity of gas-atomized Ti-45Al-8Nb powder, and consequently on the printability of the alloy regarding its selective laser melting (SLM). It is observed that the Y addition significantly improves the SLM printability of the alloy and realizes samples that are free of macrocracks. The change in the surface structure of the powder is regarded as a critical factor contributing to improved printability. The corresponding chemical state and layer thickness of the oxide film covering the powder are determined by X-ray photoelectron spectroscopy (XPS) depth profile and transmission electron microscopy (TEM). It is further found that the surface structure of the powder leads to a higher laser absorption. As suggested by the study, modification of powder chemistry and powder surface structure by rare earth elements can be an effective means to improve the SLM formability of crack-sensitive materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. An overview of monolithic titanium aluminides based on Ti3Al and TiAl10.1016/S0254-0584(01)00328-5 ↗
2. High temperature materials for aerospace applications: Ni-based superalloys and γ-TiAl alloys10.1016/j.crhy.2018.10.002 ↗
3. Processing and applications of intermetallic γ‐TiAl‐based alloys10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
4. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
5. Refinement of lamellar structures in Ti-Al alloy10.1016/j.actamat.2016.11.045 ↗
6. Superplastic deformation mechanisms of high Nb containing TiAl alloy with (α2 + γ) microstructure10.1016/j.intermet.2016.06.003 ↗
7. Effect of Nb on oxidation behavior of high Nb containing TiAl alloys10.1016/j.intermet.2010.08.029 ↗
8. First-principles investigation on stability and oxygen adsorption behavior of a O/B2 interface in Ti2AlNb alloys10.1016/j.jallcom.2019.152926 ↗
9. Phase transformation and microstructure control of Ti2AlNb-based alloys: a review10.1016/j.jmst.2020.11.022 ↗
10. Hot working behavior and processing map of a γ-TiAl alloy synthesized by powder metallurgy10.1016/j.matdes.2011.06.003 ↗
11. Metallurgy, microstructure and properties of intermetallic TiAl ingots10.1007/s00501-010-0580-9 ↗
12. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
13. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges10.1016/j.compositesb.2018.02.012 ↗
14. Perspective of additive manufacturing for metamaterials development10.1088/1361-665X/ab2eb6 ↗
15. Review of selective laser melting: materials and applications10.1063/1.4935926 ↗
16. Selective laser melting of Ti–22Al–25Nb intermetallic: significant effects of hatch distance on microstructural features and mechanical properties10.1016/j.jmatprotec.2019.116398 ↗
17. Microstructure stability of γ-TiAl produced by selective laser melting10.1016/j.scriptamat.2016.11.028 ↗
18. Enhanced nanohardness and new insights into texture evolution and phase transformation of TiAl/TiB2 in-situ metal matrix composites prepared via selective laser melting10.1016/j.actamat.2017.07.003 ↗
19. Study of selective laser melting of intermetallic TiAl powder using integral analysis10.1016/j.ijmachtools.2018.02.003 ↗
20. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy10.1016/j.jallcom.2014.06.172 ↗
21. Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: a state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility10.1016/j.msec.2017.02.094 ↗
22. Study of microstructure evolution and preference growth direction in a fully laminated directional micro-columnar TiAl fabricated using laser additive manufacturing technique10.1016/j.matlet.2019.01.137 ↗
23. Effect of laser scanning speed on a Ti-45Al-2Cr-5Nb alloy processed by selective laser melting: Microstructure, phase and mechanical properties10.1016/j.jallcom.2016.07.206 ↗
24. Parameter optimization for Ti-47Al-2Cr-2Nb in selective laser melting based on geometric characteristics of single scan tracks10.1016/j.optlastec.2016.11.002 ↗
25. Selective laser melting of an oxide dispersion strengthened (ODS) γ-TiAl alloy towards production of complex structures10.1016/j.matdes.2017.08.034 ↗
26. Selective laser melting of a beta-solidifying TNM-B1 titanium aluminide alloy10.1016/j.jmatprotec.2014.04.002 ↗
27. Laser powder bed fusion of potential superalloys: a review10.3390/met11010058 ↗
28. The crack and pore formation mechanism of Ti-47Al-2Cr-2Nb alloy fabricated by selective laser melting10.1016/j.ijrmhm.2020.105247 ↗
29. Microstructural control and mechanical properties of dual-phase TiAl alloys10.1016/S0966-9795(98)00062-4 ↗
30. Oxygen gain and aluminum loss during laser metal deposition of intermetallic TiAl10.2351/1.5096974 ↗
31. Effects of interstitial oxygen on microstructure and mechanical properties of Ti-48Al-2Cr-2Nb with fully lamellar and duplex microstructures10.1007/BF02586211 ↗
32. Laser deposition of graded γ-TiAl/Ti2AlNb alloys: microstructure and nanomechanical characterization of the transition zone10.1016/j.jallcom.2021.159946 ↗
33. Laser powder bed fusion of an engineering intermetallic TiAl alloy10.1016/j.matdes.2021.109506 ↗
34. Microstructure of γ-titanium aluminide processed by selective laser melting at elevated temperatures10.1016/j.intermet.2015.07.005 ↗
35. A study on hot-working as alternative post-processing method for titanium aluminides built by laser powder bed fusion and electron beam melting10.1016/j.jmatprotec.2020.117024 ↗
36. Simultaneous gettering of oxygen and chlorine and homogenization of the β phase by rare earth hydride additions to a powder metallurgy Ti-2.25Mo-1.5Fe alloy10.1016/j.scriptamat.2012.06.009 ↗
37. Rare earth element: is it a necessity for PM Ti alloys?10.4028/www.scientific.net/KEM.520.41 ↗
38. Fabrication of fully dense TiAl-based composite sheets with a novel microlaminated microstructure10.1016/j.scriptamat.2011.11.009 ↗
39. Bulk nanostructured Ti-45Al-8Nb alloy fabricated by cryomilling and spark plasma sintering10.1016/j.jallcom.2018.09.095 ↗
40. Microstructure evolution and mechanical properties of a Ti-45Al-8.5Nb-(W, B, Y) alloy obtained by controlled cooling from a single β region10.1016/j.jallcom.2017.12.326 ↗
41. The effect of yttrium addition on the oxidation resistance of EPM TiAl-based intermetallics10.1016/S1359-6462(03)00134-9 ↗
42. Effect of yttrium addition on microstructures and room temperature tensile properties of Ti-47 Al alloy10.1016/S1002-0721(06)60123-3 ↗
43. Element distribution and its induced peritectic reaction during solidification of Ti-Al-Nb alloys10.3390/met11091386 ↗
44. Layered surface structure of gas-atomized high Nb-containing TiAl powder and its impact on laser energy absorption for selective laser melting10.1016/j.apsusc.2018.01.296 ↗
45. The surface structure of gas-atomized metallic glass powders10.1016/j.scriptamat.2009.11.013 ↗
46. Moulder · 1992
47. Fundamentals of laser-material interaction and application to multiscale surface modification
48. Selective laser melting of typical metallic materials: an effective process prediction model developed by energy absorption and consumption analysis
49. A comprehensive study of steel powders (316L, H13, P20 and 18Ni300) for their selective laser melting additive manufacturing10.3390/met9010086 ↗
50. Oxidation effect for laser irradiating the metal
51. Refractive index
52. Refractive indices of rutile and sphalerite10.1364/JOSA.41.000416 ↗
53. Measurement of the optical constants of yttrium oxide10.1143/JJAP.7.404 ↗
54. Infrared thermal imaging for melt pool analysis in SLM: a feasibility investigation10.1080/17452759.2017.1392685 ↗
55. Selective laser melting of Al7050 powder: melting mode transition and comparison of the characteristics between the keyhole and conduction mode10.1016/j.matdes.2017.09.014 ↗
56. γ‐titanium aluminide alloys: alloy design and properties
57. Balling processes during selective laser treatment of powders10.1108/13552540410526953 ↗
58. Physical aspects of process control in selective laser sintering of metals10.1002/adem.200310099 ↗
59. Synergistic effect of B and Y on the isothermal oxidation behavior of TiAl-Nb-Cr-V alloy10.1016/j.corsci.2017.12.013 ↗
60. Synergistic effect of Y and Nb on the high temperature oxidation resistance of high Nb containing TiAl alloys10.1016/j.intermet.2012.01.015 ↗
61. On the mechanism of high temperature oxidation of metals and alloys10.1016/0010-938X(67)80033-7 ↗