journal article·2021-11

Effect of carbon content on the properties of inhomogeneous cemented carbides with fine-grained structures produced via one-step transformation

Yanyuan Tang, Shengnan Wang, Feiyan Xu, Yuankun Hong, Xin Luo, Shanming He, Liyong Chen, Zhiqiang Zhong, Hao Chen, Guozuan Xu, Qiumin Yang

Publisher page

Abstract

Abstract Inhomogeneous cemented carbides with fine-grained structure produced via one-step transformation were prepared using coarse WC, WO3, C and Co as raw materials. The effect of carbon content on the properties of inhomogeneous cemented carbides was studied. The results indicated that the peak intensity of Co (1 1 1) had a positive relationship with carbon content. The coarse WC grains were irregularly-shaped with some growth steps and the fine grains were near-spherical shape in the alloy with low carbon content. Upon increasing the carbon content, the coarse WC grains tended to be planar and the number of growth steps decreased gradually. The number of fine WC grains increased at higher carbon contents in the WC-Co3W3C-Co alloys, resulting in a decrease in the average WC grain size. Then, the number of fine WC grains decreased and the coarse WC grains grew upon increasing the carbon content in the alloys without the Co3W3C phase, which increased the average WC grain size. The mechanical property variation of the alloys was derived from the phase composition, morphologies and the size of WC grains. Thus, the alloy with 7.24 wt% carbon displayed the maximum hardness and transverse rupture strength due to its high number of prismatic WC grains and lack of free carbon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Tunneling and Rock Mechanics · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. The role of Y2O3, Cu, Mo and Mo2C additives on optimizing the corrosion resistance of WC-6Co cemented carbide in HCl and NaOH solutions10.1016/j.jallcom.2020.154269 ↗
2. Study on high temperature deformation behavior of WC-10 wt%Ni3Al cemented carbide10.1016/j.jallcom.2019.153156 ↗
3. A novel route for the synthesis of ultrafine WC-15 wt% Co cemented carbides10.1016/j.jallcom.2018.03.197 ↗
4. The influence of grain growth inhibitors on the microstructure and properties of submicron, ultrafine and nano-structured hardmetals-A review10.1016/j.ijrmhm.2018.07.003 ↗
5. Oscillatory pressure sintering: A new method for preparing WC-Co cemented carbides10.1016/j.jallcom.2019.152521 ↗
6. Trends in the P/M hard metal industry10.1016/j.ijrmhm.2014.07.007 ↗
7. Preparation and properties of the VC/Cr3C2/TaC doped ultrafine WC-Co tool material by spark plasma sintering10.1016/j.jallcom.2019.152598 ↗
8. Effect of Co on microstructure and mechanical properties of ultrafine grained WC-Co cemented carbide sintered by spark plasma sintering10.1016/j.ceramint.2018.07.100 ↗
9. Fabrication and mechanical properties of WC-10Co cemented carbides with plate-like WC grains10.1016/j.jallcom.2019.06.328 ↗
10. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
11. Performance enhancement of ultra-coarse cemented carbide by boride additives10.1016/j.jallcom.2020.155250 ↗
12. SPS hard metal alloy WC-8Ni-8Fe fabrication based on mechanochemical synthetic tungsten carbide powder10.1016/j.jallcom.2019.152547 ↗
13. Relation between the nitrogen gas pressure and structure characteristics of WC-Ti(C, N)-Co graded cemented carbides10.1016/j.jallcom.2020.154764 ↗
14. Effect of carbon content on microstructure and mechanical properties of WC-10Co cemented carbides with plate-like WC grain10.1016/j.ceramint.2019.09.158 ↗
15. Simultaneous strengthening and toughening effects inWC-(nanoWC-Co)10.1016/j.scriptamat.2012.02.005 ↗
16. Achieving combination of high hardness and toughness for WC-8Co hardmetals by creating dual scale structured plate-like WC10.1016/j.ceramint.2017.10.190 ↗
17. The effects of fine WC contents and temperature on the microstructure and mechanical properties of inhomogeneous WC-(fine WC-Co) cemented carbides10.1016/j.ceramint.2016.08.119 ↗
18. The effects of micron WC contents on the microstructure and mechanical properties of ultrafine WC-(micron WC-Co) cemented carbides10.1016/j.jallcom.2014.01.090 ↗
19. Fabrication of dual-grain structure WC-Co cemented carbide by in-situ carbothermal reduction of WO3 and subsequent liquid sintering10.1016/j.ceramint.2020.02.045 ↗
20. Effect of WO3 content on microstructure and mechanical properties of dual-grain structured hardmetals fabricated by in-situ carbothermal reduction of WO310.1016/j.ceramint.2020.05.089 ↗
21. Effects of carbon content on microstructure and properties of WC-20Co cemented carbides10.1016/j.ijrmhm.2013.09.010 ↗
22. Microstructure evolution in the cemented carbides WC-Co I. Effect of the C/W ratio on the morphology and defects of the WC grains10.1002/1521-396X(200209)193:2<271::AID-PSSA271>3.0.CO;2-O ↗
23. Investigation on reduction and carbonization process of WC-Co composite powder obtained by In-situ synthesis10.1016/j.jallcom.2018.10.211 ↗
24. Synthesis of ultrafine WC‐Co composite powders under hydrogen atmosphere with in situ carbon via a one‐step reduction‐carbonization process10.1111/ijac.12628 ↗
25. Microstructure, grain size distribution and grain shape in WC-Co alloys sintered at different carbon activities10.1016/j.ijrmhm.2013.12.007 ↗
26. A study on the synthesis of nanostructured WC-10 wt% Co particles from WO3, Co3O4, and graphite10.1007/s10853-010-4937-y ↗
27. On the reaction sequence of WC-Co formation using an integrated mechanical and thermal activation process10.1016/S1359-6454(01)00209-9 ↗
28. The shape of WC crystals in cemented carbides10.1016/S0921-5093(97)00509-1 ↗
29. Coarsening, densification, and grain growth during sintering of nano-sized powders-A perspective10.1016/j.ijrmhm.2016.09.004 ↗
30. Physical and chemical nature of cemented carbides
31. Direct solid-state synthesis of tungsten carbide nanoparticles from mechanically activated tungsten oxide and graphite10.1016/j.ijrmhm.2010.06.004 ↗
32. Tungsten carbide (WC) nanopowders synthesized via novel core-shell structured precursors10.1016/j.ceramint.2012.09.061 ↗
33. Investigation on morphology evolution of coarse grained WC–6Co cemented carbides fabricated by ball milling route and hydrogen reduction route10.1016/j.ijrmhm.2016.01.001 ↗
34. Growth mechanisms of WC in WC-5.75 wt% Co10.1016/j.ceramint.2011.06.016 ↗
35. Morphology of WC grains in WCCo alloys: theoretical determination of grain shape10.1016/j.actamat.2006.10.013 ↗
36. The equilibrium morphology of WC particles-A combined ab initio and experimental study10.1016/j.actamat.2011.03.018 ↗
37. A model for the hardness of cemented carbides10.1016/S0043-1648(01)00866-3 ↗
38. Hardness and deformation of cemented tungsten carbide10.1016/0025-5416(78)90163-5 ↗
39. Intrinsic hardness of constitutive phases in WC-Co composites: nanoindentation testing, statistical analysis, WC crystal orientation effects and flow stress for the constrained metallic binder10.1016/j.jeurceramsoc.2015.04.021 ↗
40. Correlation of transverse rupture strength of WC-Co with hardness10.1016/j.ijrmhm.2004.11.005 ↗
41. Fracture and strength of hardmetals at room temperature10.1016/B978-0-08-096527-7.00010-6 ↗
42. Synthesis and processing of nanocrystalline tungsten carbide: towards cemented carbides with optimal mechanical properties10.1016/j.ijrmhm.2010.08.003 ↗
43. Complexions in WC-Co cemented carbides10.1016/j.actamat.2018.02.018 ↗
44. On the fatigue crack growth behavior of WC–Co cemented carbides: kinetics description, microstructural effects and fatigue sensitivity10.1016/S1359-6454(02)00071-X ↗