journal article·2021-07

Effect of the Ta addition on densification and mechanical properties of NbTi alloys prepared by SPS

Qingxiang Wang, Guodong Cui, Hui Chen

Publisher page

Abstract

Abstract In this study, we have fabricated a highly compact NbTi-xTa (x = 0, 1, 2) alloy was fabricated by spark plasma sintering (SPS) using the NbTi powder produced by the plasma rotation electrode process (PREP) and Ta powder produced by the sodium reduction method. Afterward, the alloy samples were subjected to diffusion heat treatment. The microstructure and phase compositions of the NbTi-xTa (x = 0, 1, 2) alloys were examined by using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDS), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). Furthermore, we assessed the microhardness and compression properties of the samples. The results showed that sintering temperature and the Ta content were the key factors that affected the densification. Moreover, with the Ta content increase, the compactness of the alloy slightly decreased, while the microhardness increased. It was also indicated that the Ta addition of suppressed the grain growth and changed the NbTi solid solution from the original (110) surface to the (211) surface after the heat treatment. The first-principles calculation also showed that the Ta addition further stabilized the BCC structure of the NbTi alloy, and it was challenging to prepare HCP precipitates, such as α-Ti.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Cold work loss during heat treatment and extrusion of Nb-46.5wt%Ti composites as measured by microhardness10.1109/77.233808 ↗
2. Optimization of anti-wear and anti-bacterial properties of beta TiNb alloy via controlling duty cycle in open-air laser nitriding10.1016/j.jmbbm.2020.103913 ↗
3. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
4. Development of Nb44wt%Ti 25wt%Ta based superconducting conductors for LHC magnets10.1109/77.402584 ↗
5. Microstructure property relationships in Nb-Ti-Ta10.1109/77.233648 ↗
6. Microstructure evolution of NbTiTa composite after extrusions10.1016/S1875-5372(09)60002-3 ↗
7. Properties of rod-based artificial pinning center Nb-Ti superconductor10.1109/77.402905 ↗
8. Some properties of NbTiTa ternary alloys10.1109/77.784694 ↗
9. Enhanced mechanical properties of NbCr2 Laves phase by spark plasma sintering10.1016/j.vacuum.2016.05.029 ↗
10. Pressure controlled micro-viscous deformation assisted spark plasma sintering of Fe-based bulk amorphous alloy10.1016/j.jallcom.2017.12.147 ↗
11. Fabrication of highly compact Inconel 718 alloy by spark plasma sintering and solution treatment followed by aging10.1016/j.vacuum.2019.01.048 ↗
12. Densification mechanisms in spark plasma sintering: effect of particle size and pressure10.1016/j.powtec.2012.01.005 ↗
13. Microstructure and mechanical properties of powder metallurgy medical ultrafine β-type Ti28Nb2Zr8Sn alloy
14. Effect of sintering temperature on microstructure and mechanical properties of Ti-24Nb-4Zr-8Sn alloy prepared by SPS
15. Segregation in stellite powders produced by the plasma rotating electrode process10.1016/S0921-5093(98)01021-1 ↗
16. Effects of temperature on microstructure and mechanical properties of IN718 reinforced by reduced graphene oxide through spark plasma sintering10.1016/j.jallcom.2018.07.071 ↗
17. Tailoring microstructure and properties of a superelastic Ti–Ta alloy by incorporating spark plasma sintering with thermomechanical processing10.1007/s11665-019-04061-8 ↗
18. Microstructure and mechanical properties of Nb25Mo25Ta25W25 and Ti8 Nb23Mo23Ta23W23 high entropy alloys prepared by mechanical alloying and spark plasma sintering10.1016/j.msea.2018.09.089 ↗
19. Application of ab initio and CALPHAD thermodynamics to Mo-Ta-W alloys10.1103/PhysRevB.71.094206 ↗
20. Evaluation of the tantalum-titanium phase diagram from ab-initio calculations10.1016/j.actamat.2016.08.053 ↗
21. Lattice parameters and relative stability of α″phase in binary titanium alloys from first-principles calculations10.1016/j.ssc.2013.01.026 ↗
22. First-principles calculations of structural and elastic properties of Tix-Nb(1−x) alloys