journal article·2020-01

Synthesis and characterization of colourful aluminates based on nickel and zinc

Thais Cristine de Sousa Santos, Ana Carolina Monte Almeida, Darllan do Rosario Pinheiro, Cristiane Maria Leal Costa, Diego Cardoso Estumano, Nielson Fernando da Paixão Ribeiro

Publisher page

Abstract

Gradual changes in the chemical composition of spinel cause variations in the distribution of cations in sites, which affects their properties and colouration. Thus, pigments with nickel-zinc spinel structures (Ni xZn 1-xAl 2O 4 ) were synthesized by combustion and characterized by varying the chromophore ion content (x = 0; 0.1; 0.2; 0.4 and 1) and calcination temperature (600°, 800° and 1000 °C). Characterization of aluminates through thermal analysis (TGA) showed a less than 10% mass loss until approximately 500 °C in not-calcined samples, indicating the combustion reaction could be classified as adequate. The spinel phase was confirmed in all samples by X-ray diffraction (XRD) with segregated phases: ZnO in samples with x = 0 and NiO in samples with x = 0.4 and 1. The post-synthesis thermal treatment at high temperature led to higher crystallinity of the material and the incorporation of secondary phases into the spinel structure. The crystallite size varied between 22.9 and 43.2 nm. Scanning Electron Microscopy (SEM) analysis indicated that the pore size increased with the increasing calcination temperature, and infrared spectroscopy indicated the displacement of the AlO6 band (665 cm −1) to AlO4 (730 cm −1) after the addition of Ni 2+ ions, revealing the inversion of the crystalline structure. Colorimetric analysis by the CIELab method showed the colour of the zinc-nickel pigments ranged between white (x = 0) and cyan tones (0 < x ≤ 1). Furthermore, the significant influence of the chromophore ion content and calcination temperature on the colouration of the synthesized pigments was verified by the Tukey test at 5% in terms of the luminosity (L*) and chromaticity (a* and b*). The difference between dry powder and that dispersed in varnish was considered evident. The colorimetric data were used to develop a mathematical model to satisfactorily describe the values of L*, a* and b* as functions of the calcination temperature and nickel load.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Pigment Synthesis and Properties · Cultural Heritage Materials Analysis · Luminescence Properties of Advanced Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Inorganic pigments caracterization based of Fe, Zn e Cr using electoroplating residue of raw material10.1590/S0366-69132005000200006 ↗
2. Comparison of color and optical absorbance properties of divalent ion substituted Cu and Zn aluminate spinel oxides synthesized by combustion method towards pigment application10.1016/j.dyepig.2015.08.024 ↗
3. A study on the structure and catalytic performance of ZnxCu1-xAl2O4 catalysts synthesized by the solution combustion method for the esterification reaction
4. Inogarnic pigments: project, production, industrial applying
5. Spectroscopic study of a Ni-bearing gahnite pigment10.1016/j.jeurceramsoc.2004.10.027 ↗
6. Structural and thermal characterization of NixZn1-xAl2O4 synthesized by the polymeric precursor method10.1007/s10973-015-5056-4 ↗
7. Shriver · 2005
8. Nanostructured CuAl2O4: Co-precipitation synthesis, optical and photocatalytic properties
9. Combustion synthesis of CuFe2O410.1016/S0025-5408(02)01004-8 ↗
10. Citrus pectin as a template for synthesis of colorful aluminates10.1016/j.dyepig.2015.10.015 ↗
11. Synthesis and characterization of nanosized zinc aluminate spinel by sol–gel technique10.1016/j.matlet.2005.10.024 ↗
12. Structural, optical, and magnetic properties of Cu-doped TiO2 samples
13. Structural, optical and magnetic characterization of Cu-doped ZnO nanoparticles synthesized using solid state reaction method10.1007/s10854-009-0041-y ↗
14. Synthesis of zinc aluminate (ZnAl2O4) spinel and its application as photocatalyst10.1590/S1516-14392014005000073 ↗
15. Synthesis of nanosized (Zn1-xCox)Al2O4 spinels: new pink ceramic pigments10.1016/j.materresbull.2011.10.024 ↗
16. Synthesis and characterization of spinel-type CuAl2O4 nanocrystalline by modified sol–gel method10.1007/s10971-009-1940-3 ↗
17. Cobalt and nickel aluminate spinels: blue and cyan pigments10.1016/j.ceramint.2013.10.081 ↗
18. Combustion synthesis of La0.7Sr0.3Co0.5Fe0.5O3 (LSCF) porous materials for application as cathode in IT-SOFC10.1016/j.materresbull.2010.10.009 ↗
19. Synthesis of NiAl2O4 with high surface area as precursor of Ni nanoparticles for hydrogen production10.1016/j.ijhydene.2010.08.024 ↗
20. Nanocrystalline thoria powders via glycine-nitrate combustion10.1016/S0022-3115(00)00717-0 ↗
21. Combustion synthesis: an update10.1016/S1359-0286(02)00123-7 ↗
22. Energetic materials in ceramics synthesis
23. Ultrafine ceria powders via glycine-nitrate combustion10.1016/S0025-5408(01)00762-0 ↗
24. Synthesis of LaCrO₃ and La₀.₉Ca₀.₁CrO₃ by modified Glycine nitrate process
25. Combustion synthesis and nanomaterials10.1016/j.cossms.2008.12.002 ↗
26. Nickel catalyst prepared via glycine nitrate process for partial oxidation of methane to syngas10.1016/j.catcom.2007.12.009 ↗
27. Colour analysis of some cobalt-based blue pigments10.1016/S0955-2219(00)00295-8 ↗
28. Blue pigments based on CoxZn1-xAl2O4 spinels synthesized by the polymeric precursor method10.1016/j.dyepig.2008.09.017 ↗
29. Preparation and characterization of nanoscale cobalt blue pigment for ceramic inkjet printing by sol-gel self-propagating combustion10.1590/1980-5373-mr-2017-0322 ↗
30. Nickel-doped zinc aluminate oxides: starch-assisted synthesis, structural, optical properties, and their catalytic activity in oxidative coupling of methane10.1007/s11051-013-1456-1 ↗
31. Smith · 2007
32. The NBS tables of chemical thermodynamic properties: selected values for inorganic and C1 and C2 organic substances in SI units
33. Dean · 1979
34. Perry · 1975
35. Thermodynamic, structural and magnetic studies of NiFe2O4 nanoparticles prepared by combustion method: effect of fuel10.1016/j.jallcom.2012.08.092 ↗
36. Buxbaum · 2005
37. Effect of particle size on the strength of a porous nickel aluminate fabricated by a polymer solution route
38. Effect of Mn doping on Crystal structure, dielectric and magnetic ordering of Bi0.8Ba0.2FeO3 multiferroic10.1016/j.ceramint.2015.12.077 ↗
39. Journal of Physics and Chemistry of Solids Effect of Al3+ substitution on structural, cation distribution, electrical and magnetic properties of CoFe2O410.1016/j.jpcs.2013.12.015 ↗
40. Infrared spectra of ferrites10.1103/PhysRev.99.1727 ↗
41. Production of a red – purple food colorant from Opuntia stricta fruits by spray drying and its application in food model systems10.1016/j.jfoodeng.2008.07.013 ↗
42. Synthesis and characterization of NixMg1-xAl2O4 nano ceramic pigments via a combustion route10.1016/j.poly.2010.11.034 ↗