Toughening and maintaining strength of diamond with substitutional doping boron and nitrogen
Source abstract
Abstract
Abstract As the hardest materials, natural and synthetic diamonds have been widely used in industrial production, but the inherent brittleness may strongly restrict their applications. In this work, aiming at the enhancement of the ductility of diamond, the effects of substitutional doping boron (B) or nitrogen (N) on the mechanical properties of diamond were systematically investigated using first-principles calculations. It was found that doping B or N could substantially induce partial slip that leads to atomic reconfiguration at the defect region of diamond, which results in an increase of ductility while retains the high strength of diamond. The results may help us to gain an insight into the enhancement of the mechanical properties of the material by doping substitutional impurities at atomic scale.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Ultralarge elastic deformation of nanoscale diamond10.1126/science.aar4165 ↗
2. Misfit accommodation mechanism at the heterointerface between diamond and cubic boron nitride10.1038/ncomms7327 ↗
3. Effects of strain rate and annealing temperature on tensile properties of nanocrystalline diamond10.1016/j.carbon.2018.04.052 ↗
4. Anisotropy effects in diamond under nanoindentation10.1016/j.carbon.2018.02.066 ↗
5. Strengthening and toughening by partial slip in nanotwinned diamond10.1016/j.carbon.2019.04.107 ↗
6. Man-Made diamonds10.1038/176051a0 ↗
7. Direct conversion of graphite to diamond in static pressure apparatus
8. Direct conversion of graphite to diamond under static pressure10.1038/259038a0 ↗
9. N-type B-S co-doping and S doping in diamond from first principles10.1016/j.carbon.2018.01.028 ↗
10. Nitrogen-doped carbon materials10.1016/j.carbon.2018.02.024 ↗
11. Superhard three-dimensional carbon with metallic conductivity10.1016/j.carbon.2017.07.034 ↗
12. Tappert · 2011
13. The problem of the two types of diamond10.1038/174901a0 ↗
14. Diamonds in nature: a guide to rough diamonds10.2113/econgeo.106.8.1479 ↗
15. Characterising natural-colour type IIB blue diamonds | gems & gemmology10.5741/GEMS.34.4.246 ↗
16. Structure, electronic properties, and electrochemical behavior of a boron-doped diamond/quartz optically transparent electrode10.1021/acsami.6b02467 ↗
17. Boron-doped diamond synthesized at high-pressure and high-temperature with metal catalyst10.1016/j.jpcs.2016.11.020 ↗
18. Boron-doped diamond electrode: synthesis, characterization, functionalization and analytical applications10.1039/b910206j ↗
19. High-pressure synthesis and characterization of thermal-stable boron-doped diamond single crystals10.1016/j.ijrmhm.2008.07.015 ↗
20. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
21. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
22. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
23. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
24. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
25. First-principles investigation of strain effects on the stacking fault energies, dislocation core structure, and Peierls stress of magnesium and its alloys10.1103/PhysRevB.95.224106 ↗
26. Ab initio modeling of dislocation core properties in metals and semiconductors10.1016/j.actamat.2016.09.049 ↗
27. Molecular dynamics simulation of the slip systems in VN10.1039/C5RA15878H ↗
28. Molecular dynamics simulation of VN thin films under indentation10.1016/j.apsusc.2015.09.024 ↗
29. Generalized stacking fault energy surfaces and dislocation properties of silicon: a first-principles theoretical study10.1080/01418619608240729 ↗
30. Intrinsic stacking faults in body-centred cubic crystals10.1080/14786436808227500 ↗
31. Vacancy mediated alloying strengthening effects on γ/γ′ interface of Ni-based single crystal superalloys: a first-principles study10.1016/j.actamat.2017.05.074 ↗
32. Anisotropic ideal strengths and chemical bonding of wurtzite BN in comparison to zincblende BN10.1103/PhysRevB.77.172103 ↗
33. Friedel oscillations are limiting the strength of superhard nanocomposites and heterostructures10.1103/PhysRevLett.102.015503 ↗
34. Harder than diamond: superior indentation strength of wurtzite BN and lonsdaleite10.1103/PhysRevLett.102.055503 ↗
35. Atomistic deformation modes in strong covalent solids10.1103/PhysRevLett.94.145505 ↗
36. Higher strength and ductility than diamond: nanotwinned diamond/cubic boron nitride multilayer10.1021/acsami.8b13763 ↗
37. Unexpected strain-stiffening in crystalline solids10.1038/nature12008 ↗
38. Discrete and continuous deformation during nanoindentation of thin films10.1016/S1359-6454(00)00009-4 ↗
39. Ideal pure shear strength of aluminum and copper10.1126/science.1076652 ↗
40. Generalized stacking fault energies and ideal strengths of MC systems (M = Ti, Zr, Hf) doped with Si/Al using first principles calculations10.1016/j.jallcom.2017.12.240 ↗
41. Theoretical strength and cleavage of diamond10.1103/PhysRevLett.84.5160 ↗
42. Dislocation behaviors in nanotwinned diamond
43. Instabilities in diamond under high shear stress10.1103/PhysRevLett.85.4904 ↗
44. Graphitization resistance determines super hardness of lonsdaleite, nanotwinned and nanopolycrystalline diamond10.1016/j.carbon.2018.03.012 ↗
45. Terraces at ohmic contact in SiC electronics: structure and electronic states10.1063/1.4729074 ↗
46. SiC/Ti3SiC2interface: atomic structure, energetics, and bonding10.1103/PhysRevB.79.045318 ↗
47. Investigation of impurity induced twinning in MgO from first principles calculations10.1016/j.commatsci.2018.04.039 ↗