journal article·2019-02

High-throughput analysis of Al and Nb effects on mechanical behaviour of TiAl alloys using electromagnetic cold crucible continuous casting

Qi Wang, Ruirun Chen, Yaohua Yang, Jingjie Guo, Yanqing Su, Hongsheng Ding, Hengzhi Fu

Publisher page

Abstract

Abstract To optimize the microstructure and mechanical properties of TiAl-based alloys, a novel high-throughput preparation method was developed using the electromagnetic cold crucible continuous casting (ECCCC) technique. Ti-48Al/Ti-44Al (at.%) and Ti-47Al-10Nb/Ti-47Al high-throughput gradient materials (HTGMs) were successfully fabricated using the ECCCC technique. Composition, microstructure and mechanical properties were systematically investigated. The results show that the HTGMs exhibit continuous and subtle variations in composition. The solute content at different pulling lengths was calculated, with the composition gradient controlled by the height of the molten pool. Using this method, the optimized composition of Ti-47Al-6Nb was determined by studying Ti-48Al/Ti-44Al and Ti-47Al-10Nb/Ti-47Al HTGMs. The ECCCC technique provides a new method to fabricate TiAl-based HTGMs; it is suitable for studying the effects of solute content on microstructure and mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
2. Microstructure evolution and mechanical properties of a Ti-45Al-8.5Nb-(W, B, Y) alloy obtained by controlled cooling from a single β region10.1016/j.jallcom.2017.12.326 ↗
3. Hot forging design and microstructure evolution of a high Nb containing TiAl alloy10.1016/j.intermet.2014.11.002 ↗
4. Appel · 2011
5. Effects of Nb and Al on the microstructures and mechanical properties of high Nb containing TiAl base alloys10.1016/S0966-9795(02)00037-7 ↗
6. Microstructure control of Ti-45Al-8.5Nb-(W, B, Y) alloy during the solidification process10.1016/j.actamat.2016.04.021 ↗
7. Effects of V and B, Y additions on microstructure and creep behavior of high-Nb TiAl alloys10.1016/j.jallcom.2018.03.055 ↗
8. Microstructure, microsegregation pattern and the formation of B2 phase in directionally solidified Ti-46Al-8Nb alloy10.1016/j.jallcom.2012.07.023 ↗
9. High-throughput analysis for preparation, processing and analysis of TiO2, coatings on steel by chemical solution deposition10.1016/j.jallcom.2012.06.054 ↗
10. High throughput evaluation of the effect of Mg concentration on natural ageing of Al-Cu-Li-(Mg) alloys10.1016/j.scriptamat.2018.03.024 ↗
11. High-throughput measurement of the composition-dependent interdiffusivity matrices in Ni-rich fcc Ni–Al–Ta alloys at elevated temperatures10.1016/j.jallcom.2016.07.003 ↗
12. Microstructure and mechanical property of laser melting deposition (LMD) TI/GiAl structural gradient material10.1016/j.matdes.2009.07.004 ↗
13. Functionally graded materials: a review of fabrication and properties10.1016/j.apmt.2016.10.001 ↗
14. Investigation of macro/microstructure evolution and mechanical properties of directionally solidified high-Nb TiAl-based alloy10.1016/j.matdes.2015.09.116 ↗
15. Directional solidification of TiAl–W–Si alloy by electromagnetic confinement of melt in cold crucible10.1016/j.intermet.2012.07.018 ↗
16. Experimental and numerical investigation on mass transfer induced by electromagnetic field in cold crucible used for directional solidification10.1016/j.ijheatmasstransfer.2017.06.039 ↗
17. Heat transfer and macrostructure formation of Nb containing TiAl alloy directionally solidified by square cold crucible
18. Review of alloy and process development of TiAl alloys10.1016/j.intermet.2005.10.019 ↗
19. Tensile properties and fracture toughness of TiAl alloys with controlled microstructures10.1016/0966-9795(96)00047-7 ↗
20. Microsegregation in high Nb containing TiAl alloy ingots beyond laboratory scale10.1016/j.intermet.2006.10.003 ↗
21. Alloying mechanism of beta stabilizers in a TiAl alloy10.1007/s11661-001-0136-4 ↗
22. Development of ultrafine lamellar structures in two-phase γ -TiAl alloys10.1007/s11661-998-0163-5 ↗