Ag nanoparticles promoted LiFePO 4 F nanospheres cathode with superior cycling stability for lithium-ion batteries
Source abstract
Abstract
Abstract Tavorite-like structure LiFePO4F has been recently studied as potential alternative cathode materials for lithium-ion batteries due to its outstanding structural stability, abundant resources and remarkable safety. However, its poor electronic conductivity and lithium-ion diffusion coefficient leads to the unsatisfactory cycling stability and rate capabilities of LiFePO4F. Herein, Ag decorated LiFePO4F nanospheres have been synthesized for the first time via a precipitation method with in-situ reduction of Ag+, simultaneously improving electronic conductivity and lithium-ion diffusion coefficient. The Ag nanoparticles with size of ∼10 nm are in-situ grown on the surface of LiFePO4F nanospheres with impressive electrochemical performance. It delivers a high discharge capacity of 148.7 mAh g−1 (very close to the theoretical capacity of 152 mAh g−1) at 0.1 C. It is worth mentioning that the Ag-decorated LiFePO4F nanospheres reveal superior cycling stability. The initial discharge capacities of Ag-decorated LiFePO4F reaches up to 120.3 mAh·g−1 at 0.5 C, and the capacity retention is as high as 96.1% after 300 cycles, which is remarkable higher than that of pure LiFePO4F nanospheres with initial discharge capacity of 110.2 mAh·g−1 and capacity retention of 83.1% after 300 cycles. Furthermore, the Ag-decorated LiFePO4F displays the average discharge potential loss of only 0.7% which is lower than pure LiFePO4F of 4.7% after 300 cycles, and the corresponding specific energy retention ratio of 95.5% which is higher than that of 80.1%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Visualization of anisotropic-isotropic phase transformation dynamics in battery electrode particles
2. Direct view on the phase evolution in individual LiFePO4 nanoparticles during Li-ion battery cycling10.1038/ncomms9333 ↗
3. AVPO4F (A= Li, K): a 4 V cathode material for high-power rechargeable batteries10.1021/acs.chemmater.5b04065 ↗
4. New form of Li2FePO4F as cathode material for Li-ion batteries10.1021/cm302724a ↗
5. Synthesis, crystal structure and electrochemical properties of LiFePO4F cathode material for Li-ion batteries10.1016/j.electacta.2014.09.131 ↗
6. A 3.6 V lithium-based fluorosulphate insertion positive electrode for lithium-ion batteries10.1038/nmat2590 ↗
7. J. Barker, Y.M. Saidi, J. Swoyer, Lithium metal fluorophosphate materials and preparation thereof, US Patent: 7 855 462, 2005.
8. Tavorite lithium iron fluorophosphate cathode materials: phase transition and electrochemistry of LiFePO4F-Li2FePO4F10.1149/1.3298353 ↗
9. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
10. Phosphorous acid route synthesis of iron tavorite phases, LiFePO4(OH)xF1-x [0<=x<=1] and comparative study of their electrochemical activities10.1039/C4RA05391E ↗
11. Synthesis, impedance and electrochemical studies of lithium iron fluorophosphate, LiFePO4F cathode10.1016/j.electacta.2012.08.073 ↗
12. One-pot synthesis of Li2FePO4F nanoparticles via a supercritical fluid process and characterization for application in lithium-ion batteries10.1039/c3ra42686f ↗
13. Comparative study and electrochemical properties of LiFePO4F synthesized by different routes10.5012/bkcs.2012.33.7.2315 ↗
14. Reversible storage of lithium in silver-coated three-dimensional macroporous silicon10.1002/adma.200903755 ↗
15. Preparation of ultrafine carbon spheres by controlled polymerization of furfuryl alcohol in microdroplets10.1021/ie4029939 ↗
16. Detecting trace melamine in solution by SERS using Ag nanoparticle coated poly (styrene-co-acrylic acid) nanospheres as novel active substrates10.1021/la203049k ↗
17. Facile synthesis of silver nanoparticles useful for fabrication of high-conductivity elements for printed electronics10.1021/ja043425k ↗
18. Research of silver plating nano-graphite filled conductive adhesive10.1016/j.synthmet.2008.12.003 ↗
19. LiV3O8/Ag composite nanobelts with enhanced performance as cathode material for rechargeable lithium batteries10.1016/j.jallcom.2013.08.124 ↗
20. Synthesis and characterization of silver/lithium cobalt oxide (Ag/LiCoO2) nanofibers via sol–gel electrospinning10.1016/j.jpcs.2013.05.021 ↗
21. Improved the lithium storage capability of BaLi2Ti6O14 by electroless silver coating10.1016/j.electacta.2015.10.175 ↗
22. Solution-derived lithium manganese oxide thin films with silver additive and their characterization10.1016/j.matchemphys.2006.03.009 ↗
23. Synthesis, structure and electrochemistry of Ag-modified LiMn2O4 cathode materials for lithium-ion batteries10.1016/j.materresbull.2007.08.013 ↗
24. Synthesis and characterization of LiFePO4/(Ag+C) composite cathodes with nano-carbon webs10.1016/j.powtec.2007.05.017 ↗
25. Surface modification by silver coating for improving electrochemical properties of LiFePO410.1016/j.ssc.2003.10.015 ↗
26. Synthesis and electrochemical performances of Li3V2(PO4)3/(Ag+C) composite cathode10.1016/j.jpowsour.2010.02.014 ↗
27. Effect of Ag additive on the performance of LiNi1/3Co1/3 Mn1/3O2 cathode material for lithium ion battery10.1016/j.jpowsour.2009.01.016 ↗
28. Enhanced electrochemical performance of Ag-coated CuCr2O4 as anode material for lithium-ion batteries10.1016/j.ceramint.2014.04.025 ↗
29. Highly dispersed Ag nanoparticles (< 10nm) deposited on nanocrystalline Li4Ti5O12 demonstrating high-rate charge/discharge capability for lithium-ion battery10.1016/j.jpowsour.2012.01.068 ↗
30. Partially reduced Co3O4/graphene nanocomposite as an anode material for secondary lithium ion battery10.1016/j.electacta.2013.03.140 ↗
31. Ammonia assisted hydrothermal synthesis of monodisperse LiFePO4/C microspheres as cathode material for lithium ion batteries10.1149/2.095112jes ↗
32. Li fast ion conductive La0.56Li0.33TiO3 inlaid LiFePO4/C microspheres with enhanced high-rate performance as cathode materials10.1016/j.electacta.2014.11.179 ↗
33. Improved electrochemical performance of LiFePO4/C cathode via Ni and Mn co-doping for lithium-ion batteries10.1016/j.jpowsour.2013.03.035 ↗