journal article·2018-04

Dynamic response of surface micro-features subjected to a laser shock wave planishing technique

Fengze Dai, Jie Geng, Xudong Ren, Jinzhong Lu, Shu Huang

Publisher page

Abstract

Abstract A periodic micro-groove was fabricated on the surface of LY2 aluminum samples using a picosecond laser system, and then the samples were subjected to a laser shock wave planishing (LSWP) treatment. The deformation of micro-features was evaluated using a non-contact 3D profilometer. The experimental results show that LSWP can effectively lower the height of the micro-features. An axisymmetric 2D model was constructed to simulate the dynamic response of the micro-features at a strain rate of 106 s−1. The profile of micro-features predicted from the finite element modeling matches quite well with the experimental results. The simulated dynamic deformation of micro-features clearly reveals the plastic flow behaviors of the surface materials after the LSWP treatment and provides useful optimized LSWP parameters to control the roughness and profile accuracy of the treated surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Laser Material Processing Techniques · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Issues concerning roughness on wind turbine blades10.1016/j.rser.2013.02.034 ↗
2. Effect of surface roughness on the aerodynamic performance of turbine blade cascade10.1016/j.jppr.2014.05.001 ↗
3. A local process model for simulation of robotic belt grinding10.1016/j.ijmachtools.2006.07.002 ↗
4. Improving the quality of surface in the polishing with the magnetic abrasive powder polishing using a high-frequency induction heating source on CNC table10.1007/s00170-010-3109-1 ↗
5. Structural dimension optimization of robotic belt grinding system for grinding workpieces with complex shaped surfaces based on dexterity grinding space10.1016/S1000-9361(11)60041-1 ↗
6. Physical study of laser-prodeced plasma in confined geometry10.1063/1.346783 ↗
7. Prediction of the residual state in 304 austenitic steel after laser shock peening – effects of plastic deformation and martensitic phase transformation10.1016/j.ijmecsci.2016.03.022 ↗
8. Modeling and strategies for laser shock processing
9. FEM calculation of residual stresses induced by laser shock processing in stainless steels10.1088/0965-0393/15/3/002 ↗
10. Shock waves from a water-confined laser-generated plasma10.1063/1.366113 ↗
11. Laser shock processing of aluminium alloys. Application to high cycle fatigue behavior10.1016/0921-5093(95)10084-9 ↗
12. Johnson · 1983 · 541
13. Enhancing surface integrity and corrosion resistance of laser cladded Cr–Ni alloys by hard turning and low plasticity burnishing10.1016/j.apsusc.2017.03.028 ↗
14. An engineering high cycle fatigue strength prediction model for low plasticity burnished samples10.1016/j.ijfatigue.2017.06.013 ↗
15. Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth10.1016/j.actamat.2014.09.032 ↗
16. Simulation on deforming progress and stress evolution during laser shock forming with finite element method10.1016/j.jmatprotec.2015.01.004 ↗
17. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts10.1016/j.actamat.2010.03.026 ↗