journal article·2018-01

Effects of Mg content and annealing treatment on optical and electrical properties of CuMg and ITO/CuMg metallic glass films

H.K. Lin, S.Z. Hong

Publisher page

Abstract

Abstract CuMg (CM) and ITO/CuMg (ICM) films with Mg contents ranging from 30 to 65 at% are deposited on glass substrates and are then treated by furnace annealing and laser annealing. The structural, optical and electrical properties of the as-deposited and annealed samples are investigated and compared. It is shown that as the Mg content increases, the sheet resistance of the CM film increases, while the transmittance decreases. For a Mg content of 49 at%, the bi-layer ITO/CM structure improves the transmittance from 62.6% (CM) to 75.6% (ICM) and reduces the resistance from 51.3 Ω/□ (CM) to 49.5 Ω/□ (ICM). Moreover, following furnace annealing at 200 °C, the transmittance of the ICM sample is further improved to 78.5% while the sheet resistance is reduced to 32.4 Ω/□. The corresponding figure of merit is equal to 2.74 × 10 −3 Ω −1 , and is thus similar to that of commercial ITO film (2.68 × 10 −3 Ω −1 ). The optimal laser annealing parameters for the Cu 51 Mg 49 ICM sample are found to be a pulse energy of 1 μJ and a repetition rate of 250 kHz. Given the use of these parameters, the ICM film has a transmittance of 77.5% and a sheet resistance of 26.5 Ω/□. The corresponding figure of merit has a value of 2.94 × 10 −3 Ω −1 . Finally, the relative change in resistivity of the as-deposited Cu 43 Mg 57 ICM sample following fatigue testing with a bend radius of 7 mm (ΔR/R 0 = 0.21) is significantly lower than that of a pure ITO film of roughly equivalent thickness (ΔR/R 0 = 0.93).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Surface Roughness and Optical Measurements · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Effect of the duty ratio on the indium tin oxide (ITO) film deposited by in-line pulsed DC magnetron sputtering method for resistive touch panel10.1016/j.apsusc.2011.09.081 ↗
2. Direct laser patterning of transparent ITO–Ag–ITO multilayer anodes for organic solar cells10.1016/j.apsusc.2014.12.017 ↗
3. Effect of process parameters on the characteristics of indium tin oxide thin film for flat panel display application10.1016/S0040-6090(96)09581-8 ↗
4. Comparison study of ITO thin films deposited by sputtering at room temperature onto polymer and glass substrates10.1016/j.tsf.2004.11.040 ↗
5. Growth and characterization of indium tin oxide thin films deposited on PET substrates10.1016/j.tsf.2007.05.028 ↗
6. Structural, optical and electrical characterization of ITO, ITO/Ag and ITO/Ni transparent conductive electrodes10.1016/j.apsusc.2013.10.079 ↗
7. ITO/Ag/ITO multilayer films for the application of a very low resistance transparent electrode10.1016/S0040-6090(98)01556-9 ↗
8. Present status of transparent conducting oxide thin-film development for Indium-Tin-Oxide (ITO) substitutes10.1016/j.tsf.2007.10.063 ↗
9. ITO/metal/ITO multilayer structures based on Ag and Cu metal films for high-performance transparent electrodes10.1016/j.solmat.2008.02.038 ↗
10. Dependence of film composition and thicknesses on optical and electrical properties of ITO–metal–ITO multilayers10.1016/S0040-6090(98)00520-3 ↗
11. ITO/Ag/ITO multilayer films for the application of a very low resistance transparent electrode10.1016/S0040-6090(98)01556-9 ↗
12. Influence of substrate temperature and sputtering atmosphere on electrical and optical properties of double silver layer systems10.1016/S0040-6090(01)01049-5 ↗
13. Effect of Ag thickness on electrical transport and optical properties of indium tin oxide–Ag–indium tin oxide multilayers10.1063/1.3153977 ↗
14. TCO/metal/TCO structures for energy and flexible electronics10.1016/j.tsf.2011.06.091 ↗
15. Characteristic studies on the Zr-based metallic glass thin film fabricated by magnetron sputtering process10.1016/j.surfcoat.2008.06.099 ↗
16. Thin film metallic glasses: preparations, properties, and applications10.1007/s11837-010-0053-3 ↗
17. Recent progress in metallic glasses in Taiwan10.1016/j.intermet.2009.05.004 ↗
18. Thin film metallic glasses: unique properties and potential applications10.1016/j.tsf.2012.03.092 ↗
19. Improved bending fatigue behavior of flexible PET/ITO film with thin metallic glass interlayer10.1016/j.matlet.2013.09.084 ↗
20. Effect of substrate temperature and annealing treatment on the electrical and optical properties of silver-based multilayer coating electrodes10.1016/j.tsf.2006.07.061 ↗
21. Crystallization and electrical property change on the annealing of amorphous indium-oxide and indium-tin-oxide thin films10.1016/S0040-6090(99)00749-X ↗
22. A simple annealing process to obtain highly transparent and conductive indium doped tin oxide for dye-sensitized solar cells10.1016/j.ceramint.2013.09.086 ↗
23. Optimisation of ITO by excimer laser annealing for a-Si:H/c-Si solar cells10.1016/j.egypro.2012.07.114 ↗
24. Laser annealing process of ITO thin films using beam shaping technology10.1016/j.optlaseng.2011.10.002 ↗
25. Effects of laser irradiation on the structure and optical properties of ZnO thin films10.1016/j.matlet.2010.06.022 ↗
26. A study on electric properties for pulse laser annealing of ITO film after wet etching10.1016/j.tsf.2012.09.010 ↗
27. Electrode patterning of ITO thin films by high repetition rate fiber laser10.1016/j.apsusc.2014.04.084 ↗
28. Effects of laser annealing parameters on optical and electrical properties of ITO/metallic glass alloy Bi-layer films10.1186/s11671-015-0982-4 ↗
29. Demonstration of a high average power tabletop soft X-Ray Laser10.1103/PhysRevLett.81.5804 ↗
30. New figure of merit for transparent conductors10.1063/1.323240 ↗
31. Characteristic difference between ITO/ZrCu and ITO/Ag bi-layer films as transparent electrodes deposited on PET substrate10.1016/j.apsusc.2010.06.074 ↗
32. Agglomeration and long-range edge retraction for Au/Ni bilayer films during thermal annealing10.1016/j.actamat.2016.08.021 ↗