journal article·2017-12

Electrochemical hydriding of nanocrystalline Mg-Ni-X (X = Co, Mn, Nd) alloys prepared by mechanical alloying and spark plasma sintering

V. Knotek, O. Ekrt, A. Michalcová, D. Vojtěch

Publisher page

Abstract

Abstract In this work, MgNi26, MgNi26Mn10, MgNi26Co10 and MgNi26Nd10 alloys were prepared by mechanical alloying (MA) and subsequent spark plasma sintering (SPS). Mechanical alloying leads to a grain refinement and increases the concentration of lattice defects. SPS technology provides a compact material but with high porosity, consequently creating a high internal surface area within the volume of sample. The combination of the MA and SPS techniques produces a promising material in terms of fast hydriding kinetics and a high content of absorbed hydrogen. All samples were electrochemically hydrided in a 6 mol/L KOH solution at 80 °C for 480 min. The microstructures of the alloys were characterized by scanning electron microscopy and energy dispersive spectrometry. The phase compositions were characterized by X-ray diffraction, and the total hydrogen content in the hydrided pellets was measured using an inert gas fusion analyser. The dehydriding process was studied by thermogravimetry and mass spectrometry. The highest total amount of hydrogen was absorbed by the MgNi26Nd10 alloy, nearly 1.8 wt%. The main hydriding product was the binary hydride MgH2. The results of the mass spectrometry analysis reveal a significant reduction in the temperature of hydrogen evolution from magnesium hydride, probably due to the formation of fine microstructures of the hydrogenated alloys and catalytic effect of Ni. The decomposition temperature was reduced by more than 200 °C as compared to the commercial MgH2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Ammonia Synthesis and Nitrogen Reduction · Hybrid Renewable Energy Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Hydrogen diffusion in Mg–H and Mg–Ni–H alloys10.1016/j.actamat.2008.02.003 ↗
2. Mg-based compounds for hydrogen and energy storage10.1007/s00339-016-9601-1 ↗
3. Microstructure and novel hydrogen storage properties of melt-spun Mg–Ni–Mm alloys10.1016/j.jallcom.2008.10.122 ↗
4. Structure and hydrogen storage properties of Mg3Pr and Mg3PrNi0.1 alloys10.1016/j.scriptamat.2008.12.001 ↗
5. LaMg2NiH7, a novel quaternary metal hydride containing tetrahedral [NiH4]4− complexes and hydride anions10.1016/S0925-8388(02)00963-5 ↗
6. Characteristic features of the sorption–desorption of hydrogen by Mg–M–Ni (M = Al, Mn, Ti) ternary alloys10.1007/s11003-013-9595-1 ↗
7. The electrochemical hydrogen storage performances of MgxCo100–x (x = 40, 45, 50, 55, 60, 63) body-centered cubic alloys and their Pd-doped system10.1016/j.ijhydene.2015.10.040 ↗
8. Hydrogen storage in Mg: a most promising material10.1016/j.ijhydene.2009.08.088 ↗
9. Cryomilling and spark plasma sintering of nanocrystalline magnesium-based alloy10.1557/jmr.2010.94 ↗
10. Development of Mg based hydrogen absorbing alloys prepared by mechanical alloying10.1016/j.jallcom.2013.03.265 ↗
11. The role of spark plasma sintering on the improvement of hydrogen storage properties of Mg-based composites10.1016/j.ijhydene.2010.01.048 ↗
12. A new electrode material for nickel–metal hydride batteries: MgNiPt alloy prepared by ball-milling10.1016/j.jpowsour.2006.03.018 ↗
13. Cooperative effect of Co and Al on the microstructure and electrochemical properties of AB3-type hydrogen storage electrode alloys for advanced MH/Ni secondary battery10.1016/j.ijhydene.2010.08.056 ↗
14. TiN–TiB2 composites prepared by various sintering techniques10.1016/j.ijrmhm.2013.07.009 ↗
15. Electrochemical hydriding of Mg–Ni–Mm (Mm = mischmetal) alloys as an effective method for hydrogen storage10.1016/j.ijhydene.2012.12.112 ↗
16. Electrochemical hydriding performance of Mg–TM–Mm (TM=transition metals, Mm=mischmetal) alloys for hydrogen storage10.1016/S1003-6326(13)62695-3 ↗
17. Catalytic effect of Mg2Ni and Mg12RE on MgH2 formation and decomposition10.1016/j.ijhydene.2016.03.087 ↗
18. Ab initio calculations on energetics and electronic structures of cubic Mg3MNi2 (M = Al, Ti, Mn) hydrogen storage alloys10.1016/j.ijhydene.2011.08.016 ↗
19. Structural characterization and electrochemical hydrogen storage properties of Mg2Ni1−xMnx(x = 0, 0.125, 0.25, 0.375) alloys prepared by mechanical alloying
20. First-principles study of structural stabilities and electronic properties of Mg–Nd intermetallic compounds10.1016/j.physb.2007.12.016 ↗
21. Andreasen · 2004
22. Hydrogen storage characteristics of nanocrystalline and amorphous Nd-Mg-Ni-Based NdMg12-type alloys synthesized via mechanical milling10.1007/s11661-016-3757-3 ↗
23. New Mg–Mn–Ni alloys as efficient hydrogen storage materials10.1016/j.intermet.2010.04.011 ↗
24. Metal hydride materials for solid hydrogen storage: a review10.1016/j.ijhydene.2006.11.022 ↗
25. Trends in hydride formation energies for magnesium-3d transition metal alloys10.1016/j.jallcom.2004.03.143 ↗
26. A powder metallurgy approach for the production of a MgH2–Al composite material10.1016/j.jallcom.2008.12.032 ↗
27. Understanding the dehydrogenation process of MgH2 from the recombination of hydrogen atoms10.1016/j.ijhydene.2016.02.059 ↗
28. Particle size, grain size and γ-MgH2 effects on the desorption properties of nanocrystalline commercial magnesium hydride processed by controlled mechanical milling10.1088/0957-4484/17/15/041 ↗
29. Desorption characteristics of rare earth (R) hydrides (R=Y, Ce, Pr, Nd, Sm, Gd and Tb) in relation to the HDDR behaviour of R–Fe-based-compounds10.1016/S0925-8388(96)03097-6 ↗
30. Nanomaterials for hydrogen storage applications: a review10.1155/2008/950967 ↗