Supercritical CO2 assisted fabrication of activated carbon-sulfur composite for improved lithium-sulfur batteries
Source abstract
Abstract
Abstract In order to alleviate the shuttle effect and improve the electrical conductivity of sulfur in Li-S batteries, supercritical CO2 (scCO2) assisted deposition was demonstrated to impregnate sulfur into activated carbon for fabricating high performance cathode materials. Activated carbon and sulfur were agitated in CS2–modified scCO2 at 100 °C and 150 bar for 3 h. The appreciable densities and solvent power, combined with low viscosity, low surface tension and high diffusivity of scCO2, facilitated highly dispersed impregnation of high loading percentage of sulfur into porous structure of activated carbon whilst enabling excellent electrical contact. Lab Li-S battery test showed that after 150 cycles under current density of 0.5 C, the resultant carbon-sulfur composite exhibited a capacity retention of ∼60%, higher than that of ∼45% for the counterpart prepared by melting infiltration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design10.1038/ncomms11203 ↗
2. Disordered mesoporous polyacenes/sulfur nanocomposites: superior cathode materials for lithium-sulfur batteries10.1016/j.jallcom.2016.09.235 ↗
3. MoS 2 -decorated coaxial nanocable carbon aerogel composites as cathode materials for high performance lithium sulfur batteries10.1016/j.jallcom.2016.09.004 ↗
4. Polysulfide-containing glyme-based electrolytes for lithium sulfur battery10.1021/acs.chemmater.5b00896 ↗
5. Nitrogen-doped porous “green carbon” derived from shrimp shell: combined effects of pore sizes and nitrogen doping on the performance of lithium sulfur battery10.1016/j.jallcom.2016.02.064 ↗
6. Highly mesoporous carbon foams synthesized by a facile, cost-effective and template-free Pechini method for advanced lithium-sulfur batteries10.1039/c2ta01213h ↗
7. Systematic effect for an ultralong cycle lithium-sulfur battery10.1021/acs.nanolett.5b02864 ↗
8. Decoration of sulfur with porous metal nanostructures: an alternative strategy for improving the cyclability of sulfur cathode materials for advanced lithium-sulfur batteries10.1039/c3cc41875h ↗
9. Sulfur nano-granular film coated three-dimensional graphene sponge based high power lithium sulfur battery10.1021/acsami.5b10267 ↗
10. Mesoporous carbon-carbon nanotube-sulfur composite microspheres for high-areal-capacity lithium-sulfur battery cathodes10.1021/am4035784 ↗
11. Encapsulating sulfur into hierarchically ordered porous carbon as a high-performance cathode for lithium-sulfur batteries10.1002/chem.201202127 ↗
12. Bio-inspired fabrication of carbon nanotiles for high performance cathode of Li–S batteries10.1039/C3TA14113F ↗
13. Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability10.1021/nl200658a ↗
14. Strong sulfur binding with conducting Magneli-phase Ti(n)O2(n-1) nanomaterials for improving lithium-sulfur batteries10.1021/nl502331f ↗
15. A multi functional binder with lithium ion conductive polymer and polysulfide absorbents to improve cycleability of lithium–sulfur batteries10.1016/j.jpowsour.2015.06.083 ↗
16. Fibrous hybrid of graphene and sulfur nanocrystals for high-performance lithium-sulfur batteries10.1021/nn401228t ↗
17. A facile in situ sulfur deposition route to obtain carbon-wrapped sulfur composite cathodes for lithium–sulfur batteries10.1016/j.electacta.2012.06.002 ↗
18. In situ synthesis of bipyramidal sulfur with 3D carbon nanotube framework for lithium–sulfur batteries10.1002/adfm.201302915 ↗
19. A comparison of sulfur loading method on the electrochemical performance of porous carbon/sulfur cathode material for lithium–sulfur battery10.1007/s10008-013-2337-3 ↗
20. Conductive Lewis base matrix to recover the missing link of Li2S8 during the sulfur redox cycle in Li–S battery10.1021/cm5044667 ↗
21. Tailoring porosity in carbon nanospheres for lithium–sulfur battery cathodes10.1021/nn404439r ↗
22. Lanthanum nitrate as electrolyte additive to stabilize the surface morphology of lithium anode for lithium-sulfur battery10.1021/acsami.5b12231 ↗
23. Hierarchical porous carbon by ultrasonic spray pyrolysis yields stable cycling in lithium–sulfur battery10.1021/nl501383g ↗
24. Lithium–sulfur battery cathode enabled by lithium–nitrile interaction10.1021/ja309435f ↗
25. Making nanomaterials in supercritical fluids: a review10.1021/ed080p198 ↗
26. Direct growth of highly dispersed MnCl2 · 4H2O nanostructures with different morphologies on graphene in supercritical CO210.1088/2053-1591/3/6/065012 ↗
27. Preparation of porous poly(L-lactic acid)-co-(trimethylene-carbonate) structures using supercritical CO2 as antisolvent and as foaming agent
28. Organosilicon compounds in supercritical carbon dioxide: synthesis, polymerization, modification, and production of new materials
29. Supercritical fluid fabrication of metal nanowires and nanorods templated by multiwalled carbon nanotubes10.1002/adma.200390077 ↗
30. Co/MCM41 catalyst in the COProx reaction prepared by supercritical CO2 reactive deposition10.1016/j.micromeso.2016.10.006 ↗
31. Synthesis of metal and metal oxide nanowire and nanotube arrays within a mesoporous silica template10.1021/cm034139v ↗
32. Cobalt oxide nanoparticles on mesoporous MCM-41 and Al-MCM-41 by supercritical CO2 deposition10.1016/j.micromeso.2011.07.014 ↗
33. Sulfur-infiltrated graphene-based layered porous carbon cathodes for high-performance lithium–sulfur batteries10.1021/nn501284q ↗
34. Hierarchically structured sulfur/carbon nanocomposite material for high-energy lithium battery10.1021/cm902050j ↗
35. Polyaniline-coated mesoporous carbon/sulfur composites for advanced lithium sulfur batteries
36. Graphene derived carbon confined sulfur cathodes for lithium-sulfur batteries: electrochemical impedance studies10.1016/j.electacta.2016.08.030 ↗
37. Sulfur-infiltrated graphene-based layered porous carbon cathodes for high-performance lithium–sulfur batteries10.1021/nn501284q ↗
38. Long-Life, high-efficiency lithium-sulfur battery from nano-assembled cathode10.1021/acs.chemmater.5b01780 ↗