Preparation, microstructural evolution and properties of Ni–Zr intermetallic/Zr–Si ceramic reinforced composite coatings on zirconium alloy by laser cladding
Source abstract
Abstract
Abstract NiZr 2 –ZrSi–Zr 5 (Si x Ni 1−x ) 4 -ZrC intermetallic/ceramic reinforced composite coatings were in situ synthesized by laser cladding the pre-placed Ni–Cr–B–Si powder on zirconium substrate. Microstructure and phase constituents were investigated by X-ray diffraction (XRD), optical microscope (OM), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS). Microhardness tester and block-on-ring wear tester were employed to measure the hardness distribution and wear resistance of the intermetallic/ceramic reinforced composite coating. Results indicated that the multiphase of reinforcements includes Ni–Zr intermetallic compounds (e.g., NiZr and NiZr 2 ) and Zr–Si(C) ceramic phases (e.g., ZiSi, Zr 5 Si 4 and ZrC). Ni–Si clusters transforming to Zr–Si–Ni clusters at high temperature facilitated the forming of Zr 5 (Si x Ni 1−x ) 4 and during the growth of Zr 5 (Si x Ni 1−x ) 4 , the consumption of Zr atoms at the lateral interface of liquid/Zr 5 (Si x Ni 1−x ) 4 resulted into developing Zr-poor zone near Zr 5 (Si x Ni 1−x ) 4 . The microhardness and wear resistance of the coating were significantly improved by various reinforced phases in comparison to zirconium substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Microstructure and dry sliding wear behavior of plasma transferred arc clad Ti5Si3 reinforced intermetallic composite coatings10.1016/j.jallcom.2013.12.225 ↗
2. Microstructure and tribological properties of laser clad Ti2Ni3Si/NiTi intermetallic coatings10.1016/S1359-6454(03)00465-8 ↗
3. Microstructure and texture of electrodeposited Ni-ZrC composite coatings investigated by Rietveld XRD line profile analysis10.1016/j.jallcom.2014.11.144 ↗
4. Morphological evolution and growth mechanism of hierarchical structure of PbTe films grown by off-axis magnetron co-sputtering10.1016/j.apsusc.2014.10.027 ↗
5. Role of chromium ion implantation on the corrosion behavior of zircaloy-4 in 0.5M H2SO410.1016/S0013-4686(03)00901-0 ↗
6. Role of chromium ion implantation on the corrosion behavior of zirconium in 1N H2SO410.1016/j.apsusc.2004.01.011 ↗
7. Influence of molybdenum ion implantation on the aqueous corrosion behavior of zircaloy-410.1016/S0257-8972(03)00448-1 ↗
8. Enhancement of calcium phosphate formation on zirconium by micro-arc oxidation and chemical treatments10.1016/j.surfcoat.2011.04.079 ↗
9. Effect of NaAlO2 concentrations on microstructure and corrosion resistance of Al2O3/ZrO2 coatings formed on zirconium by micro-arc oxidation10.1016/j.apsusc.2010.04.017 ↗
10. In vitro degradation and electrochemical corrosion evaluations of microarc oxidized pure Mg, Mg-Ca and Mg-Ca-Zn alloys for biomedical applications10.1016/j.msec.2014.11.048 ↗
11. Dilution of molybdenum on aluminum during laser surface alloying10.1016/j.jallcom.2013.03.115 ↗
12. Influences of laser surface alloying with niobium (Nb) on the corrosion resistance of zircaloy-410.1016/S0022-3115(03)00245-9 ↗
13. Laser alloying of zinc with aluminum: solidification behavior10.1016/S1359-6454(97)00229-2 ↗
14. Phase evolution and dendrite growth in laser cladding of aluminium on zirconium10.1016/j.jallcom.2010.12.173 ↗
15. Solidification behaviour in laser cladding of AlCoCrCuFeNi high-entropy alloy on magnesium substrates10.1016/j.jallcom.2013.10.254 ↗
16. Effects of chromium addition on microstructure and properties of TiC-VC reinforced Fe-based laser cladding coatings10.1016/j.jallcom.2014.06.073 ↗
17. Preparation, microstructure and tribological behavior of laser cladding NiAl intermetallic compound coatings10.1016/j.wear.2011.09.011 ↗
18. Laser cladding of eutectic-based Ti-Ni-Al alloy coating on magnesium surface10.1016/j.surfcoat.2010.06.032 ↗
19. Thick Co-based coating on cast iron by side laser cladding: Analysis of processing conditions and coating properties10.1016/j.surfcoat.2006.10.044 ↗
20. Laser cladding of tungsten carbides (Spherotene®) hardfacing alloys for the mining and mineral industry10.1016/j.apsusc.2008.07.198 ↗
21. Surface modification of titanium alloy with laser cladding RE oxides reinforced Ti3Al–matrix composites
22. Laser cladding of aerospace materials10.1016/S0924-0136(01)01121-9 ↗
23. Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation10.1179/1743294412Y.0000000073 ↗
24. Improving the corrosion resistance and mechanical property of 45 steel surface by laser cladding with Ni60CuMoW alloy powder10.1016/j.surfcoat.2012.05.115 ↗
25. Laser cladding of aluminium on AISI 304 stainless steel with high-power diode lasers10.1016/j.surfcoat.2014.05.039 ↗
26. Laser cladding of in situ TiB2/Fe composite coating on steel10.1016/j.apsusc.2008.04.051 ↗
27. Wear resistance of laser-clad Ni–Cr–B–Si alloy on aluminium alloy10.1016/S0924-0136(99)00463-X ↗
28. Transmission electron microscopy characterization of laser-clad iron–based alloy on Al–Si alloy10.1016/j.matchar.2005.11.002 ↗
29. The microstructure and tribological characteristics of laser-clad Ni–Cr–Al coatings on aluminium alloy10.1016/S0921-5093(00)00894-7 ↗
30. Investigations of laser clad, thermal sprayed and laser remelted AlSi20-coatings on magnesium alloy AZ31B under constant and cycling thermal load10.1016/j.surfcoat.2014.09.049 ↗
31. Laser (Nd:YAG) cladding of AZ91D magnesium alloys with Al+Si+Al2O310.1016/j.jallcom.2005.06.049 ↗
32. The mechanical properties and microstructures of AZ91D magnesium alloy processed by selective laser cladding with Al powder10.1016/j.optlastec.2013.12.024 ↗
33. Microstructure development in laser forming of zirconium coatings on AZ91D magnesium alloy substrates10.1016/j.jallcom.2011.09.091 ↗
34. Phase constituents and microstructure of laser cladding Al2O3/Ti3Al reinforced ceramic layer on titanium alloy10.1016/j.jallcom.2011.01.199 ↗
35. Research on the microstructure and wear resistance of titanium alloy structural members repaired by laser cladding10.1016/j.optlaseng.2008.05.015 ↗
36. Effect of heat treatment on microstructure and mechanical properties of laser deposited Ti60A alloy10.1016/j.jallcom.2013.09.149 ↗
37. Deposition and properties of zirconia coatings on a zirconium alloy produced by pulsed DC plasma electrolytic oxidation10.1016/j.surfcoat.2013.01.040 ↗
38. How the crystallography and nanoscale chemistry of the metal/oxide interface develops during the aqueous oxidation of zirconium cladding alloys10.1016/j.actamat.2012.09.021 ↗
39. Phase transition, microstructure evolution and tribological behaviour of a laser clad NiAl intermetallic compound coating at elevated temperatures
40. Microstructure and wear resistance of laser clad TiC reinforced FeAl intermetallic matrix composite coatings10.1016/S0257-8972(02)00881-2 ↗
41. Microstructure of laser clad TiC/NiAl–Ni3(Al,Ti,C) wear-resistant intermetallic matrix composite coatings10.1016/S0167-577X(02)01132-1 ↗
42. In-situ synthesized Ni–Zr intermetallic/ceramic reinforced composite coatings on zirconium substrate by high power diode laser10.1016/j.jallcom.2014.11.075 ↗
43. Toughening mechanism for Ni–Cr–B–Si–C laser deposited coatings10.1016/j.msea.2013.06.010 ↗
44. Microstructure and interface interaction in laser induction hybrid cladding of Ni-based coating10.1016/j.apsusc.2008.10.050 ↗
45. Direct laser sintering of metal powders: mechanism, kinetics and microstructural features10.1016/j.msea.2006.04.117 ↗
46. Microstructure and properties of intermetallic composite coatings fabricated by selective laser melting of Ti–SiC powder mixtures10.1016/j.intermet.2013.11.012 ↗
47. Effects of processing parameters on structure of Ni-based WC composite coatings during laser induction hybrid rapid cladding10.1016/j.apsusc.2009.05.161 ↗
48. Microstructure and wear behavior of laser cladding VC–Cr7C3 ceramic coating on steel substrate10.1016/j.matdes.2013.01.067 ↗
49. Growth morphologies and mechanism of TiC in the laser surface alloyed coating on the substrate of TiAl intermetallics10.1016/S0925-8388(02)01077-0 ↗
50. Refractory diborides of zirconium and hafnium10.1111/j.1551-2916.2007.01583.x ↗
51. The stability of alloying additions in Zirconium10.1016/j.jnucmat.2013.01.335 ↗
52. Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding10.1016/S0257-8972(02)00697-7 ↗
53. A study on wear resistance and microcrack of the Ti3Al/TiAl+TiC ceramic layer deposited by laser cladding on Ti–6Al–4V alloy10.1016/j.apsusc.2010.08.094 ↗
54. Microstructure and tribological properties of Fe–Cr matrix self-lubricating composites against Si3N4 at high temperature10.1016/j.jallcom.2014.05.160 ↗
55. Tribological evaluation of Fe–B–TiB2 metal matrix composites10.1016/j.surfcoat.2007.05.023 ↗