Temperature-dependent short-range order formation and its effects on yield strength in single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloy
Source abstract
Abstract
Short-range order (SRO) has attracted great research interest in the field of high- and medium-entropy alloys (HEA/MEAs). In order to understand the effects of SRO on mechanical properties, it is indispensable to experimentally quantify the existence of SRO. In this work, the evolution of SRO in the equiatomic Cr-Mn-Fe-Co-Ni, the prototype HEA, has been investigated as a function of temperature by electrical resistivity measurements and the effects of SRO on the yield strength has also been investigated by compression tests at room temperature. SRO is found to occur in a homogeneous manner in the temperature range of 673-973 K with 673 K being the peak temperature. This is very similar to the equiatomic Cr-Co-Ni medium- MEA, although the kinetics for SRO is much faster in the equiatomic Cr-Mn-Fe-Co-Ni HEA due to the faster atomic diffusion. SRO does not have any significant impact on the yield stress at room temperature regardless of the degree of SRO. Being consistent with this, no significant change in dislocation structure and stacking fault energy is observed regardless of how significantly SRO develops. • The evolution of SRO was monitored by electrical resistivity in the equiatomic Cr-Mn-Fe-Co-Ni HEA. • SRO occurs homogeneously during annealing in the temperature range from 673 to 873 K. • The CRSS, dislocation structures and SFE do not change with the formation of SRO.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Correlation functions of disordered binary alloys I10.1103/PhysRev.142.418 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
4. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
5. High-entropy alloys10.1038/s41578-019-0121-4 ↗
6. Atomic displacement in the CrMnFeCoNi high-entropy alloy – a scaling factor to predict solid solution strengthening10.1063/1.4971371 ↗
7. Uniaxial mechanical properties of face-centered cubic single- and multiphase high-entropy alloys10.1557/s43577-022-00280-y ↗
8. Plastic deformation of single crystals of the equiatomic Cr-Fe-Co-Ni medium entropy alloy – A comparison with Cr-Mn-Fe-Co-Ni and Cr-Co-Ni alloys10.1016/j.ijplas.2023.103732 ↗
9. A new route to achieve high strength and high ductility compositions in Cr-Co-Ni-based medium-entropy alloys: a predictive model connecting theoretical calculations and experimental measurements10.1016/j.jallcom.2023.170555 ↗
10. Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy10.1038/srep35863 ↗
11. Plastic deformation of single crystals of the equiatomic Cr−Mn−Fe−Co−Ni high-entropy alloy in tension and compression from 10 K to 1273 K10.1016/j.actamat.2020.10.073 ↗
12. Tensile and compressive plastic deformation behavior of medium-entropy Cr-Co-Ni single crystals from cryogenic to elevated temperatures10.1016/j.ijplas.2021.103144 ↗
13. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
14. Analysis of the temperature-dependent plastic deformation of single crystals of quinary, quaternary and ternary equiatomic high- and medium-entropy alloys of the Cr-Mn-Fe-Co-Ni system10.1080/14686996.2024.2376524 ↗
15. Short-range-ordering strengthening and the evolution of dislocation-nucleation modes in an Fe40Mn20Cr20Ni20 high-entropy alloy10.1016/j.msea.2023.145038 ↗
16. Short range ordering and strengthening in CoCrNi medium-entropy alloy10.1016/j.msea.2022.143890 ↗
17. Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys10.1073/pnas.1808660115 ↗
18. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
19. Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi10.1016/j.actamat.2020.08.044 ↗
20. Short-range order and its impact on the CrCoNi medium-entropy alloy10.1038/s41586-020-2275-z ↗
21. Direct observation of local chemical ordering in a few nanometer range in CoCrNi medium-entropy alloy by atom probe tomography and its impact on mechanical properties
22. Direct observation of chemical short-range order in a medium-entropy alloy10.1038/s41586-021-03428-z ↗
23. Atomic-scale evidence of chemical short-range order in CrCoNi medium-entropy alloy10.1016/j.actamat.2021.117490 ↗
24. Kinetic study of short range order in α-CuAl alloys10.1016/0001-6160(78)90215-8 ↗
25. Investigation of short-range order by electrical resistivity measurement10.1016/0001-6160(88)90192-7 ↗
26. Evolution of short-range order and its effects on the plastic deformation behavior of single crystals of the equiatomic Cr-Co-Ni medium-entropy alloy10.1016/j.actamat.2022.118537 ↗
27. Some aspects of short-range order10.1051/jphysrad:019620023010074901 ↗
28. Strengthening due to non-random solid solutions10.1016/0921-5093(94)09674-0 ↗
29. Chemical short range order strengthening in a model FCC high entropy alloy10.1016/j.actamat.2020.02.041 ↗
30. Electronic theory of local order10.1103/PhysRev.104.350 ↗
31. Solute strengthening in random alloys10.1016/j.actamat.2016.09.046 ↗
32. Effects of annealing on hardness, yield strength and dislocation structure in single crystals of the equiatomic Cr-Mn-Fe-Co-Ni high entropy alloy10.1016/j.scriptamat.2020.09.039 ↗
33. Variation of first pop-in loads in nanoindentation to detect chemical short-range ordering in the equiatomic Cr-Co-Ni medium-entropy alloy10.1016/j.actamat.2024.119775 ↗
34. On short-range order hardening in Cu-10 at% Au10.1016/0001-6160(82)90047-5 ↗
35. Electrical resistivity behavior in Ni-25 at% Cr alloy10.1016/S0254-0584(02)00468-6 ↗
36. Microstructure and physicomechanical properties of a Cu-8 at% Pd alloy10.1134/S0031918X1712016X ↗
37. Tracer diffusion in single crystalline CoCrFeNi and CoCrFeMnNi high-entropy alloys: kinetic hints towards a low-temperature phase instability of the solid-solution?10.1016/j.scriptamat.2020.05.060 ↗
38. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.actamat.2017.12.052 ↗
39. Resistometric study of SRO-kinetics in α-AgAl10.1016/0001-6160(83)90151-7 ↗
40. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
41. Atomic ordering in the Ni-Cr-Fe system10.1016/0921-5093(94)90424-3 ↗
42. Properties and processing technologies of high-entropy alloys10.1088/2752-5724/ac5e0c ↗
43. A theory of atom size difference induced short-range order10.1016/0001-6160(65)90065-9 ↗
44. An approximate theory of order in alloys10.1103/PhysRev.77.669 ↗
45. Interplay between magnetism and short-range order in medium- and high-entropy alloys: CrCoNi, CrFeCoNi, and CrMnFeCoNi