Effect of Al2O3-SiO2 film at the interface on the microstructure formation and oxidation resistance of MoSi2 coating on Nb-Si based alloy via slurry sintering method
Source abstract
Abstract
This study aims to improve the coating density by introducing Al 2O 3-SiO 2 film as a diffusion barrier (DB) at the interface during the sintering process. The influence of the thickness of DB at the interface on the density, phase constituent and interface structure of the coating was studied. The results showed that the Al 2O 3-SiO 2 film can effectively reduce the inward diffusion of Si, facilitating the densification of MoSi 2 coating. Increasing the thickness of the DB correspondingly improves the diffusion blocking effect. Compared with the MoSi 2 coating without DB, the area porosity of the coating with a 5 μm thick DB decreased from 26.8 % to 15.8 %. The oxide DB is discontinuously distributed at the interface. However, although the density of the coatings was markedly increased, severe cracking occurred when the diffusion barrier was excessively thick. The microstructure of coating without DB and coatings with 3 and 5 μm thick DB is generally similar, with the inter-diffusion zone (IDZ) consisting of Mo 5Si 3, Nb 4Fe 3Si 5, and (Nb,X) 5Si 3 three layers. In contrast, the IDZ of coatings with 10 and 15 μm thick DB is comprised of a single (Nb,X) 5Si 3 layer. In comparison to the MoSi₂ coating without DB, the coating with a 5 μm thick DB exhibited a markedly enhanced oxidation resistance. The pores in the coating can be quickly filled by the as-formed SiO 2. The weight gain of coating with a 5 μm thick DB is about 9.4 mg/cm² after oxidation at 1250 °C for 100 h, and about 10.1 mg/cm² after oxidation at 1350 °C for 50 h.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Progress in Nb-Si ultra-high temperature structural materials: a review10.1016/j.jmst.2022.11.022 ↗
2. Ultrahigh-temperature Nb-silicide-based composites10.1557/mrs2003.192 ↗
3. Directional solidification of hypereutectic Nb-Si-Ti alloy: influence of drawing velocity change on microstructures10.1016/j.jallcom.2020.156123 ↗
4. The balance of mechanical and environmental properties of a multielement niobium-niobium silicide-based in situ composite10.1007/BF02595629 ↗
5. A review of very-high-temperature Nb-silicide-based composites10.1007/s11661-003-0269-8 ↗
6. The oxidation resistance of Nb-Si-based alloys at intermediate and high temperatures10.3390/ma13051229 ↗
7. Oxidation behavior of multiphase Nb-Mo-Si-B intermetallics10.1007/s11661-005-0175-3 ↗
8. A study of the microstructures and oxidation of Nb-Si-Cr-Al-Mo in situ composites alloyed with Ti, Hf and Sn10.1016/j.intermet.2006.08.016 ↗
9. Effect of Al, Cr and Ta additions on the oxidation behaviour of Nb-Ti-Si in situ composites at 80010.1016/j.msea.2005.10.017 ↗
10. Effects of minor B additions on tensile strength, fracture toughness and oxidation resistance of Nb-Si based alloys10.1016/j.pnsc.2021.11.006 ↗
11. Enhancing the oxidation resistance of Nb-Si based alloys by yttrium addition10.1016/j.intermet.2018.08.004 ↗
12. Effects of Si variation and Zr addition on the microstructure, oxidation resistance and mechanical property at 1523 K of Nb-Si-Ti/Zr/Hf-Cr/Al high-entropy superalloys10.1016/j.jallcom.2023.169304 ↗
13. Studies on growth mechanism of intermediate layer of (Mo,W)5Si3 and interdiffusion in the (Mo,W)-(Mo,W)Si2 system prepared by pack cementation coating
14. MoSi2-based oxidation protective coatings for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying10.1016/j.jeurceramsoc.2010.06.007 ↗
15. Microstructure and mechanical properties of MoSi2 coating deposited on Mo substrate by hot dipping processes10.1166/jno.2019.2676 ↗
16. Synthesis and kinetic study of Mo(Si,Al)2 coatings on the surface of molybdenum through hot dipping into a commercial Al-12 wt
17. Oxidation and interdiffusion behavior of Niobium substrate coated MoSi2 coating prepared by spark plasma sintering10.1016/j.apsusc.2014.09.018 ↗
18. A MoSi2-based composite coating by supersonic atmospheric plasma spraying to protect Nb alloy against oxidation at 150010.1016/j.surfcoat.2018.07.091 ↗
19. Deposition and oxidation behaviour of molybdenum disilicide coating on Nb based alloys substrate by combined AIP/HAPC processes10.1016/j.ceramint.2019.02.115 ↗
20. Improvement of oxidation resistance of a Mo-62Si-5B (at%) alloy at 1250 ℃ and 1350 ℃ via an in situ pre-formed SiO2 fabricated by spark plasma sintering10.1016/j.corsci.2017.08.019 ↗
21. Effect of SiO2 barrier scale prepared by pre-oxidation on hot corrosion behavior of MoSi2-based coating on Nb alloy10.1016/j.corsci.2020.109051 ↗
22. Microstructural evolution and oxidation behaviour of Mo-Si-B coatings on an Nb-16Si-22Ti-7Cr-2Al-2Hf alloy at 1250 ℃ prepared by spark plasma sintering10.1016/j.surfcoat.2018.08.027 ↗
23. The oxidation behaviour of uniaxial hot pressed MoSi2 in air from 400 to 1400 ℃10.1016/j.intermet.2011.03.029 ↗
24. Engineering limitations of MoSi2 coatings10.1016/0921-5093(92)90313-P ↗
25. Effect of TiAlN diffusion barrier at MoSi2-SiO2 composite coating/Mo alloy interface
26. Oxidation behavior of MoSi2-coated TZM alloys during isothermal exposure at high temperatures10.3390/coatings8060218 ↗
27. Microstructure and oxidation resistance of Ti modified Si-Mo coating on Nb-Si based ultrahigh temperature alloy10.1016/j.corsci.2023.111293 ↗
28. Oxidation response determined by multiphase-dependent melting degree of plasma sprayed MoSi2 on Nb-based alloy10.1016/j.jallcom.2018.05.277 ↗
29. Oxidation resistance and diffusion behavior of MoSi2-SiCw composite coating on Nb alloy exposed at static or cyclic oxidation10.1016/j.ijrmhm.2024.106632 ↗
30. Preparation of a tantalum-based MoSi2-Mo coating resistant to ultra-high-temperature thermal shock by a new two-step process10.1016/j.jmst.2020.11.059 ↗
31. Comparing oxidation behaviors at 1773 K and 1973 K of HfB2-MoSi2/SiC-Si coating prepared by a combination method of pack cementation, slurry painting and in-situ synthesis10.1016/j.surfcoat.2020.126418 ↗
32. Formation and oxidation behavior of Mo-Si-B composite coatings with B-rich interlayer prepared by slurry sintering method10.1016/j.corsci.2023.111353 ↗
33. Si-Mo-SiO2 oxidation protective coatings prepared by slurry painting for C/C-SiC composites10.1016/j.surfcoat.2008.04.047 ↗
34. Oxidation behavior and microstructural evolution of a slurry sintered Si-Mo coating on Mo alloy at 165010.1016/j.surfcoat.2017.05.054 ↗
35. Characterization of microstructure and oxidation behavior of Al modified MoSi2 coating on Nb-Si based alloy
36. Self-diffusion mechanisms based defect complexes in MoSi2
37. Refractory WMoNbVTa high-entropy alloy as a diffusion barrier between a molybdenum substrate and MoSi2 ceramic coating10.1016/j.ceramint.2021.12.364 ↗
38. Effects of sputter-deposited materials (W, Ti and SiC) on interfacial reaction between MoSi2 and Nb10.1016/S0042-207X(00)00281-5 ↗
39. Preparation of a dense MoSi2 coating on Nb-Si based alloy with enhanced oxidation resistance via slurry sintering method10.1016/j.surfcoat.2024.130427 ↗
40. lnterdiffusion behavior of Mo-Si-B/Al2O3 composite coating on Nb-Si based alloy10.1016/j.surfcoat.2020.126243 ↗
41. Oxidation resistance of MoSi2/NbSi2 coatings with or without an Al-Si-O interlayer on Nb-based alloy10.1016/j.surfcoat.2024.130382 ↗
42. Diffusion barrier effect of Ta or TaSi2 layer at the MoSi2/Nb-based alloy interface10.1016/j.corsci.2023.111090 ↗
43. Experimental investigation of phase equilibria in the Fe-Nb-Si ternary system10.1016/j.jallcom.2014.03.167 ↗
44. Thermodynamic Assessment of the Fe-Nb-Si System10.2298/JMMB191220029J ↗
45. The oxidation performance and interfacial reaction behavior of YSZ-ZrB2 incorporated glass composite coating10.1016/j.corsci.2021.109622 ↗
46. Effects of ternary additions on the microstructure and thermal stability of directionally-solidified MoSi2/Mo5Si3 eutectic composites10.1016/j.intermet.2014.03.015 ↗
47. Ternary alloying study of MoSi210.1007/s11661-998-0164-4 ↗
48. The 1100 °C isothermal section of Nb-Mo-Zr ternary system.10.1016/j.jallcom.2005.09.059 ↗
49. Interdiffusion in Nb-Mo, Nb-Ti and Nb-Zr systems10.4028/www.scientific.net/DDF.323-325.491 ↗
50. Diffusion characteristics and atomic mobilities for bcc refractory Mo-Ta, Mo-W, and Mo-Nb alloys10.1016/j.calphad.2011.12.004 ↗
51. Interdiffusion and diffusion structure development in selected refractory metal silicides10.1016/S0921-5093(98)01050-8 ↗
52. Effects of TiB2 contents on the microstructure and oxidation behavior of Mo-Si-B composite coatings10.1016/j.jallcom.2024.175967 ↗
53. A novel composite Si-Mo-Ti coating with Ti concentration gradient for Nb-Si based ultrahigh temperature alloy prepared by slurry sintering10.1016/j.corsci.2023.111632 ↗
54. Effect of addition of oxides on low-temperature oxidation of molybdenum disilicide10.1111/j.1151-2916.2003.tb03365.x ↗
55. Oxidation behavior of Al2O3 reinforced MoSi2 composite coatings fabricated by vacuum plasma spraying10.1016/j.ceramint.2010.05.001 ↗
56. Reactive growth of niobium silicides in bulk diffusion couples10.1016/S1359-6454(03)00323-9 ↗
57. High temperature corrosion and mechanical properties of TiC-AlSi12 composite coating fabricated on Ti-6Al-4V alloy substrate via high-energy mechanical alloying method10.1007/s11665-023-08111-0 ↗
58. Oxidation resistant FeCoNiCrAl high entropy alloy/AlSi12 composite coatings with excellent adhesion on Ti-6Al-4V alloy substrate via mechanical alloying and subsequent laser cladding10.1016/j.surfcoat.2023.129577 ↗
59. A model for estimating viscosities of aluminosilicate melts containing alkali oxides10.2355/isijinternational.47.1409 ↗
60. Effect of oxygen pressure on the microstructure and properties of the Al2O3-SiO2 thin films deposited by E-beam evaporation10.1016/j.surfcoat.2005.07.032 ↗
61. Corrosion of silicon-based ceramics in combustion environments10.1111/j.1151-2916.1993.tb03684.x ↗
62. Oxygen self-diffusion in cylindrical single-crystal mullite10.1149/1.1392692 ↗
63. Self-healing thermal barrier coating systems fabricated by spark plasma sintering10.1016/j.matdes.2018.02.001 ↗
64. Preparation of Al2O3/TiO2 particle-reinforced copper through plasma spraying and friction stir processing.10.1016/j.matdes.2015.11.047 ↗