journal article·2025-01

Phase evolution and magnetic properties of rapidly solidified Si-substituted CoCrFeMnNi high entropy alloy

Jiaqi Tang, Wenjuan Jia, Yang Wang, Yunjia Shi, Hai Huang, Guopeng Zhang

Publisher page

Abstract

High entropy alloys (HEAs) have shown good mechanical, electrical, and magnetic properties; thus, they are considered as next-generation structural–functional integration materials. Recent investigations have reported that the “negative mixing enthalpy solid solution” strategy can improve strength–ductility synergy in HEAs {An et al., Nature, 2024, 625(7996)}. However, its effects on magnetic properties remain unknown. Here, CoCrFeNiMn 10Si 10 HEA (Si10) with high negative mixing enthalpy was fabricated via gas atomization. In this study, the effects of Si substitution and rapid solidification on the magnetic properties of alloy were mainly investigated. Results indicated that most as-atomized Si10 particles exhibited a fine dendritic face-centered cubic phase, whereas a minor body-centered cubic (BCC) phase and a Cr 3Ni 5Si 2-type phase were found in ultrafine particles (less than 5 μm in diameter). Si substitution changed the magnetic transformation from Néel transformation (∼50 K) in CoCrFeMnNi (Cantor) alloy to Curie transformation (∼70 K) in Si10 alloy. The magnetization of the as-atomized Si10 powder was higher than that of the Cantor alloy and the as-homogenized Si10 powder, particularly at a temperature ranging from Curie temperature to ∼800 K. The high magnetization of the as-atomized Si10 powder was primarily due to the presence of a metastable BCC phase and Cr 3Ni 5Si 2-type phase. Moreover, a modified model was proposed to explain the magnetism of multicomponent alloys based on Slater’s equation, which is in accordance with the reported experimental studies.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Murty · 2019
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
4. High Entropy Materials as Electrodes for Supercapacitors
5. A comprehensive review: recent progress on magnetic high entropy alloys and oxides10.1016/j.jmmm.2022.169142 ↗
6. Highly efficient decomposition of ammonia using high-entropy alloy catalysts10.1038/s41467-019-11848-9 ↗
7. High-entropy alloys for solid hydrogen storage properties
8. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
9. Oxidation of CoCrFeMnNi high entropy alloys10.1007/s11837-015-1517-2 ↗
10. Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing10.1016/j.corsci.2020.108954 ↗
11. Microstructure and mechanical properties of Al0.5CoCrFeNi HEA prepared via gas atomization and followed by hot-pressing sintering10.1016/j.jmrt.2024.04.231 ↗
12. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
13. Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys10.1016/j.mseb.2009.05.024 ↗
14. Electrical, magnetic, and hall properties of AlxCoCrFeNi high-entropy alloys10.1016/j.jallcom.2010.10.210 ↗
15. The effect of bcc/fcc phase preference on magnetic properties of AlxCrFeCoNi high entropy alloys10.1016/j.intermet.2019.106672 ↗
16. Effect of aging temperature on microstructure and mechanical properties of Fe–Ni–Cr–Al high entropy alloy10.1016/j.intermet.2023.108159 ↗
17. Integrative approach to enhance the soft magnetic properties of Co35Cr5Fe10Ni30Ti20-xAlx (x= 10, 15, 20) high entropy alloys10.1016/j.jallcom.2024.175890 ↗
18. Strength-ductility synergy and superior strain-hardening ability of Ni38Co25Fe13Cr10Al7Ti7 multi principal element alloy through heterogeneous L12 structure modulation10.1016/j.jallcom.2024.173916 ↗
19. Optimizing the microstructure and mechanical performance of Fe-Ni-Cr-Al high entropy alloys via Ti addition10.1016/j.jallcom.2023.169149 ↗
20. Alloying, magnetic and corrosion behavior of AlCrFeMnNiTi high entropy alloy10.1007/s10853-018-3153-z ↗
21. Negative mixing enthalpy solid solutions deliver high strength and ductility10.1038/s41586-023-06894-9 ↗
22. Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys10.1016/j.actamat.2021.117571 ↗
23. Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys10.1016/j.ijplas.2022.103443 ↗
24. Synthesis of ultrafine dual-phase structure in CrFeCoNiAl0.6 high entropy alloy via solid-state phase transformation during sub-rapid solidification10.1016/j.jmst.2021.09.013 ↗
25. Highly oriented microtube arrays of decagonal quasicrystal approximants in Al20Si20Mn20Fe20Ga20 high-entropy alloy10.1016/j.matdes.2023.112118 ↗
26. A feasible method for the fabrication of VAlTiCrSi amorphous high entropy alloy film with outstanding anti-corrosion property10.1016/j.apsusc.2019.03.338 ↗
27. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing10.1038/s41586-022-04914-8 ↗
28. Phase separation and microhardness of rapidly solidified high-entropy CoCrFeNiCux alloys10.1016/j.jallcom.2020.156451 ↗
29. Improvement of corrosion resistance and magnetic properties of FeCoNiAl0.2Si0.2 high entropy alloy via rapid-solidification10.1016/j.intermet.2020.106778 ↗
30. A novel ultrafine-grained high entropy alloy with excellent combination of mechanical and soft magnetic properties10.1016/j.jmmm.2020.166513 ↗
31. Satellite formation mechanism in gas atomised powders10.1179/pom.1999.42.1.70 ↗
32. Effect of particle size on grain growth of Nd-Fe-B powders produced by gas atomization10.1016/j.matchar.2022.111824 ↗
33. Size-dependent microstructure evolution and formation mechanisms during the gas atomization process of FGH4113A Ni-based superalloy powder10.1016/j.vacuum.2022.111751 ↗
34. On the cooling rate-microstructure relationship in molten metal gas atomization10.1007/s11661-021-06325-2 ↗
35. Yule · 1994
36. Metastability in high entropy alloys10.1016/j.scriptamat.2020.05.049 ↗
37. Effect of high pressure on magnetic properties of CrMnFeCoNi high entropy alloy10.1016/j.jmmm.2019.165333 ↗
38. Breaking conventional limits of silicon content in Fe-xSi magnetic alloys through additive manufacturing10.1016/j.jallcom.2024.173829 ↗
39. Magnetization of TiC–10TiN–xMC–yNi (MC = Mo2C, WC) cermets10.1016/j.matdes.2016.11.026 ↗
40. Haynes · 2016
41. A systematic investigations on effect of annealing temperature on magnetic properties of a promising soft magnetic Co35Cr5Fe10Ni30Ti20 HEA10.1016/j.jallcom.2022.167451 ↗
42. Effect of annealing conditions and temperatures on phase formation and magnetic behaviour of CrFeMnNiTi high entropy alloy10.1016/j.jmmm.2018.04.056 ↗
43. Microstrucural characterization of gas atomized Fe73.5Si13.5B9Nb3Cu1 and Fe97Si3 alloys10.1016/j.jallcom.2010.12.019 ↗
44. Particle size dependence of coercivity and remanence of single-domain particles10.1063/1.1729324 ↗
45. The phase competition and stability of high-entropy alloys10.1007/s11837-014-1119-4 ↗
46. Phase selection motifs in high entropy alloys revealed through combinatorial methods: large atomic size difference favors BCC over FCC10.1016/j.actamat.2019.01.023 ↗
47. Investigation of nanoscale phase formation in rapidly solidified Fe20Co20Ni20Cr20B20−xSix alloys.10.2320/matertrans.MT-M2022058 ↗
48. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
49. Microstructural and wear characteristics of high velocity oxygen fuel (HVOF) sprayed NiCrBSi–SiC composite coating on SAE 1030 steel10.1007/s13369-013-0536-y ↗
50. Surface modification of AISI 304 stainless steel with NiBSi-SiC composite by TIG method10.1007/s11665-020-05378-5 ↗
51. Chen · 1977
52. Atomic shielding constants10.1103/PhysRev.36.57 ↗
53. Understanding magnetic exchange interactions by the pressure dependent Curie temperature in FeCoNiCuMn high entropy alloys10.1007/s11669-021-00920-x ↗
54. Chemical composition dependent local lattice distortions and magnetism in high entropy alloys10.1016/j.intermet.2020.107050 ↗
55. Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys10.1016/j.actamat.2022.117693 ↗
56. Microstructure of rapidly solidified materials10.1016/0025-5416(84)90208-8 ↗
57. A new explanation for defect properties in bcc Iron10.1143/JPSJ.53.920 ↗
58. Kronmüller · 1973 · 1006
59. Wyckoff · 1963