Enhanced accident tolerance properties of AlCrCuFeMoNbx high entropy coating for nuclear fuel cladding
Source abstract
Abstract
High entropy alloy AlCrCuFeMoNb x (x=0.5, 0.8, 1.4, 2.0) coatings were deposited on Zr-1Nb alloy substrates by magnetron co-sputtering to improve the accident tolerance capability of the nuclear fuel cladding. The structural and accidental tolerant properties of high-entropy alloy coatings have been investigated comprehensively. The results show that coatings with varying Nb contents exhibit amorphous structures. The hardness and elastic modulus of the coatings increase with the Nb content, reaching their maximum values at x = 2.0, which are 11.38 GPa and 186.05 GPa, respectively. In both the simulated normal operating and accident environment of the nuclear fuel cladding, the oxidation resistance of the coating has been investigated. The best oxidation resistance was achieved at x=0.8 in pure water at 360℃under 18.6 MPa for 3 days. The dense Cr 2O 3 and CrNbO 4 oxide films generated on the surface hinder the diffusion of oxygen ions, and account for the lower weight gain 5.10 mg/dm 2, decreased by 56.4 % compared to that of the uncoated zirconium alloy. The coating with x=0.5 showed a drastic reduction in oxidized weight gain by 84.02 % compared to the uncoated zirconium alloy in water steam at 1200℃, demonstrating excellent accident tolerance, which is due to the dense α-Al 2O 3 and CrNbO 4 protective layer generated on the surface of the coating. These findings suggest that high entropy alloy coatings have promising accidental tolerance capabilities for nuclear fuel cladding.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · High-Temperature Coating Behaviors · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Insights from review and analysis of the Fukushima Dai-ichi accident10.1080/18811248.2011.636538 ↗
2. Protective coatings on zirconium-based alloys as accident-tolerant fuel (ATF) claddings10.1515/corrrev-2017-0010 ↗
3. Preliminary assessment of accident-tolerant fuels on LWR performance during normal operation and under DB and BDB accident conditions10.1016/j.jnucmat.2013.09.052 ↗
4. Scoping assessments of ATF impact on late-stage accident progression including molten core–concrete interaction10.1016/j.jnucmat.2013.12.022 ↗
5. Development and property evaluation of nuclear grade wrought FeCrAl fuel cladding for light water reactors10.1016/j.jnucmat.2015.10.019 ↗
6. Cold-rolling & annealing process for nuclear grade wrought FeCrAl cladding alloy to enhance the strength and ductility10.1016/j.jmatprotec.2019.116434 ↗
7. Ultra-high temperature tensile properties of ODS steel claddings under severe accident conditions10.1016/j.jnucmat.2017.02.021 ↗
8. A structural model for multi-layered ceramic cylinders and its application to silicon carbide cladding of light water reactor fuel10.1016/j.jnucmat.2014.12.013 ↗
9. B.-S. Li, Pellet Cladding Mechanical Interactions of Ceramic Claddings Fuels Under Light Water Reactor Conditions, (n.d.).
10. Silicon carbide oxidation in steam up to 2 MPa10.1111/jace.13094 ↗
11. Corrosion of CVD silicon carbide in 500°C supercritical water10.1111/j.1551-2916.2006.01401.x ↗
12. Oxidation resistance and characterization of (AlCrMoTaTi)-Six-N coating deposited via magnetron sputtering10.1016/j.jallcom.2015.06.025 ↗
13. Coupling effects of temperature and strain rate on the mechanical behavior and microstructure evolution of a powder-plasma-arc additive manufactured high-entropy alloy with multi-heterogeneous microstructures10.1016/j.actamat.2024.120147 ↗
14. Synthesis and characterization of super-hard AlCrTiVZr high-entropy alloy nitride films deposited by HiPIMS10.1016/j.apsusc.2020.146529 ↗
15. Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials10.1016/j.scriptamat.2016.10.028 ↗
16. A novel AlCo1.2Cr0.8FeNi2.1 eutectic high entropy alloy with excellent corrosion resistance10.1016/j.jallcom.2024.175006 ↗
17. Microstructures and properties of high-entropy alloy films and coatings: a review10.1080/21663831.2018.1434248 ↗
18. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
19. Nanoprecipitates to enhance radiation tolerance in high-entropy alloys10.1021/acsami.2c17540 ↗
20. Microstructure and corrosion characteristics of CrCuFeMoNi HEA coatings with different compositions in high-temperature and high-pressure water
21. Mechanical and high-temperature corrosion properties of AlTiCrNiTa high entropy alloy coating prepared by magnetron sputtering for accident-tolerant fuel cladding10.1016/j.surfcoat.2021.127228 ↗
22. Effect of Nb content on microstructure, mechanical property, high-temperature corrosion and oxidation resistance of CrNb coatings for accident tolerant fuel cladding10.1016/j.ijrmhm.2022.106010 ↗
23. Design and characterisation of AlCrFeCuNb alloys for accident-tolerant fuel cladding10.1016/j.jallcom.2020.157805 ↗
24. Characterisation of AlCrCuFeMo x high entropy alloys for nuclear fuel cladding
25. Material selection for accident tolerant fuel cladding
26. Accident tolerant fuel cladding development: promise, status, and challenges10.1016/j.jnucmat.2017.12.043 ↗
27. Oxidation of amorphous HfNbTaTiZr high entropy alloy thin films prepared by DC magnetron sputtering10.1016/j.jallcom.2020.157978 ↗
28. Microstructure, hardness, resistivity and thermal stability of sputtered oxide films of AlCoCrCu0.5NiFe high-entropy alloy10.1016/j.msea.2006.12.001 ↗
29. High strength bulk amorphous alloys with low critical cooling rates (Overview)10.2320/matertrans1989.36.866 ↗
30. Quantitative evaluation of critical cooling rate for metallic glasses10.1016/S0921-5093(00)01446-5 ↗
31. Preparation, structure, and properties of an AlCrMoNbZr high-entropy alloy coating for accident-tolerant fuel cladding10.1016/j.surfcoat.2018.04.037 ↗
32. Mechanical analysis of surface-coated zircaloy cladding10.1016/j.net.2017.03.012 ↗
33. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
34. Structure and mechanical properties of multi-element (AlCrMnMoNiZr)Nx coatings by reactive magnetron sputtering10.1016/j.jallcom.2013.01.148 ↗
35. Tribo-mechanical properties of CrNbTiMoZr high-entropy alloy film synthesized by direct current magnetron sputtering10.1016/j.surfcoat.2020.126374 ↗
36. Barin · 1995
37. Interface stability, mechanical and corrosion properties of AlCrMoNbZr/(AlCrMoNbZr)N high-entropy alloy multilayer coatings under helium ion irradiation10.1016/j.apsusc.2019.04.192 ↗
38. On the oxidation mechanism of refractory high entropy alloys10.1016/j.corsci.2019.108161 ↗
39. Basic corrosion and oxidation10.1016/0010-938X(82)90076-2 ↗
40. Birks · 2006
41. The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: a review10.1016/j.pmatsci.2007.11.001 ↗
42. E.J. Opila, Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions, in: Les Embiez, 2004. https://ntrs.nasa.gov/citations/20040111433 (accessed May 10, 2024).
43. Raman microspectrometric identification of corrosion products formed on UO2 nuclear fuel during leaching experiments10.1016/S0022-3115(02)01291-6 ↗
44. Wear behavior of HVOF-sprayed Al0.6TiCrFeCoNi high entropy alloy coatings at different temperatures10.1016/j.surfcoat.2018.11.052 ↗
45. Magnetoelasticity in A Cr 2 O 4 spinel oxides ( A = Mn, Fe, Co, Ni, and Cu)10.1103/PhysRevB.87.064416 ↗