Nanoindentation-induced serrated flow behavior and deformation mechanism in metallic glass: A combined experiments and molecular dynamics simulation

In this study, the deformation behaviors of bulk metallic glass (BMG) during the nanoindentation are presented via the experiments and molecular dynamics (MD). The relationship between shear transformation zone (STZ) formation and serrated flow dynamics are developed to explain the deformation characterization evolution of BMG. It is found that as the peak load increases, the hardness and elastic modulus significantly decrease. Creep behavior at room temperature was also revealed by analyzing the creep displacement curve and the stress index under different peak loads.The accumulation of free volume during the deformation process promotes more uniform creep deformation. Furthermore, the serrated flow behaviors were analyzed innovatively using the shear stress drops further statistically. At lower loads, the occurrence of serrated retention is due to energy exceeding the potential barrier required for flow unit activation, ultimately released in the form of kinetic energy. At higher loads, the transition from intermittent curve to smooth curve exhibits a typical self-organized critical (SOC) state dynamic characteristics, and ISE phenomenon is also observed. The results also suggested that the shear deformation of the spherical indenter is more pronounced, with the shear band forming at a 45° angle to the direction of the downward pressure. And based on the Cooperative shear model (CSM) theory, the STZ size was estimated and verify that the increment of STZ makes it easier to generate stronger plastic strain to dissipate STZ, ultimately leading to complete plastic deformation. Combining five fold symmetry and gradient atoms, the majority of atoms with five fold symmetry (LFFS>0.5) have stronger resistance to plastic deformation when the load rate is low.